From patchwork Sat Dec 11 20:40:13 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tinghan Shen X-Patchwork-Id: 523178 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D0EDBC433EF for ; Sat, 11 Dec 2021 20:40:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231910AbhLKUk3 (ORCPT ); Sat, 11 Dec 2021 15:40:29 -0500 Received: from mailgw01.mediatek.com ([60.244.123.138]:34804 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S231294AbhLKUk0 (ORCPT ); Sat, 11 Dec 2021 15:40:26 -0500 X-UUID: f98cefd0190a4dbb975fdfcf09791ece-20211212 X-UUID: f98cefd0190a4dbb975fdfcf09791ece-20211212 Received: from mtkcas11.mediatek.inc [(172.21.101.40)] by mailgw01.mediatek.com (envelope-from ) (Generic MTA with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 916565421; Sun, 12 Dec 2021 04:40:18 +0800 Received: from mtkcas11.mediatek.inc (172.21.101.40) by mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Sun, 12 Dec 2021 04:40:17 +0800 Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas11.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Sun, 12 Dec 2021 04:40:17 +0800 From: Tinghan Shen To: , , , CC: , , , , , , , , , , , Tinghan Shen Subject: [PATCH v6 3/4] dt-bindings: pinctrl: mt8195: add 'pins' wrapping node Date: Sun, 12 Dec 2021 04:40:13 +0800 Message-ID: <20211211204014.8014-4-tinghan.shen@mediatek.com> X-Mailer: git-send-email 2.15.GIT In-Reply-To: <20211211204014.8014-1-tinghan.shen@mediatek.com> References: <20211211204014.8014-1-tinghan.shen@mediatek.com> MIME-Version: 1.0 X-MTK: N Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org The mt8195 pinctrl driver requires a 'pins' subnode to wrap pin properties. Signed-off-by: Tinghan Shen --- .../bindings/pinctrl/pinctrl-mt8195.yaml | 307 +++++++++--------- 1 file changed, 160 insertions(+), 147 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml index 5e2bb2bf3a55..2035bf164740 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -59,133 +59,143 @@ properties: patternProperties: '-pins$': type: object - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. - An example of using macro: - pincontroller { - /* GPIO0 set as multifunction GPIO0 */ - gpio_pin { - pinmux = ; - }; - /* GPIO8 set as multifunction SDA0 */ - i2c0_pin { - pinmux = ; - }; - }; - $ref: "pinmux-node.yaml" - - properties: - pinmux: - description: | - Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/-pinfunc.h directly. - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - - bias-pull-down: - description: | - For pull down type is normal, it don't need add RSEL & R1R0 define - and resistance value. - For pull down type is PUPD/R0/R1 type, it can add R1R0 define to - set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & - "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" - define in mt8195. - For pull down type is RSEL, it can add RSEL define & resistance value(ohm) - to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" - & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" - define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195. - oneOf: - - enum: [100, 101, 102, 103] - - description: mt8195 pull down PUPD/R0/R1 type define value. - - enum: [200, 201, 202, 203, 204, 205, 206, 207] - - description: mt8195 pull down RSEL type define value. - - enum: [75000, 5000] - - description: mt8195 pull down RSEL type si unit value(ohm). - - An example of using RSEL define: - pincontroller { - i2c0_pin { - pinmux = ; - bias-pull-down = ; - }; - }; - An example of using si unit resistance value(ohm): - &pio { - mediatek,rsel_resistance_in_si_unit; - } - pincontroller { - i2c0_pin { - pinmux = ; - bias-pull-down = <75000>; - }; - }; - - bias-pull-up: + additionalProperties: false + patternProperties: + 'pins': + type: object + additionalProperties: false description: | - For pull up type is normal, it don't need add RSEL & R1R0 define - and resistance value. - For pull up type is PUPD/R0/R1 type, it can add R1R0 define to - set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & - "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" - define in mt8195. - For pull up type is RSEL, it can add RSEL define & resistance value(ohm) - to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" - & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" - define in mt8195. It can also support resistance value(ohm) - "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195. - oneOf: - - enum: [100, 101, 102, 103] - - description: mt8195 pull up PUPD/R0/R1 type define value. - - enum: [200, 201, 202, 203, 204, 205, 206, 207] - - description: mt8195 pull up RSEL type define value. - - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] - - description: mt8195 pull up RSEL type si unit value(ohm). - An example of using RSEL define: + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + An example of using macro: pincontroller { - i2c0_pin { - pinmux = ; - bias-pull-up = ; + /* GPIO0 set as multifunction GPIO0 */ + gpio_pin { + pinmux = ; }; - }; - An example of using si unit resistance value(ohm): - &pio { - mediatek,rsel_resistance_in_si_unit; - } - pincontroller { + /* GPIO8 set as multifunction SDA0 */ i2c0_pin { pinmux = ; - bias-pull-up = <1000>; }; }; - - bias-disable: true - - output-high: true - - output-low: true - - input-enable: true - - input-disable: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - required: - - pinmux - - additionalProperties: false + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/-pinfunc.h + directly. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + bias-pull-down: + description: | + For pull down type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8195. + For pull down type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel_resistance_in_si_unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) + "75000" & "5000" in mt8195. + oneOf: + - enum: [100, 101, 102, 103] + - description: mt8195 pull down PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + - description: mt8195 pull down RSEL type define value. + - enum: [75000, 5000] + - description: mt8195 pull down RSEL type si unit value(ohm). + + An example of using RSEL define: + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-down = ; + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel_resistance_in_si_unit; + } + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-down = <75000>; + }; + }; + + bias-pull-up: + description: | + For pull up type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8195. + For pull up type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel_resistance_in_si_unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & + "75000" in mt8195. + oneOf: + - enum: [100, 101, 102, 103] + - description: mt8195 pull up PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + - description: mt8195 pull up RSEL type define value. + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] + - description: mt8195 pull up RSEL type si unit value(ohm). + An example of using RSEL define: + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-up = ; + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel_resistance_in_si_unit; + } + pincontroller { + i2c0_pin { + pinmux = ; + bias-pull-up = <1000>; + }; + }; + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux required: - compatible @@ -201,30 +211,33 @@ additionalProperties: false examples: - | - #include - #include - pio: pinctrl@10005000 { - compatible = "mediatek,mt8195-pinctrl"; - reg = <0x10005000 0x1000>, - <0x11d10000 0x1000>, - <0x11d30000 0x1000>, - <0x11d40000 0x1000>, - <0x11e20000 0x1000>, - <0x11eb0000 0x1000>, - <0x11f40000 0x1000>, - <0x1000b000 0x1000>; - reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", - "iocfg_br", "iocfg_lm", "iocfg_rb", - "iocfg_tl", "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 144>; - interrupt-controller; - interrupts = ; - #interrupt-cells = <2>; - - pio-pins { - pinmux = ; - output-low; - }; - }; + #include + #include + # + pio: pinctrl@10005000 { + compatible = "mediatek,mt8195-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11eb0000 0x1000>, + <0x11f40000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", + "iocfg_br", "iocfg_lm", "iocfg_rb", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 144>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <2>; + + pio-pins { + pins_bus { + pinmux = ; + output-low; + }; + }; + };