diff mbox series

[v5,9/9] ARM: dts: wpcm450: Add pinmux information to UART0

Message ID 20220129115228.2257310-10-j.neuschaefer@gmx.net
State Accepted
Commit e6cb1fc9635fcf14dc86a50cacc89c556dbee56c
Headers show
Series None | expand

Commit Message

Jonathan Neuschäfer Jan. 29, 2022, 11:52 a.m. UTC 
UART0 always uses the same pins, so lets add the pinctrl information to
the common devicetree for WPCM450.

UART1 has different connection options, so I'm not adding the pinctrl
properties there.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

v4-v5:
- no changes

v3:
- New patch
---
 arch/arm/boot/dts/nuvoton-wpcm450.dtsi | 2 ++
 1 file changed, 2 insertions(+)

--
2.34.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index 0c547bd88bdbd..93595850a4c3c 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -55,6 +55,8 @@  serial0: serial@b8000000 {
 			reg-shift = <2>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
 			status = "disabled";
 		};