diff mbox series

[v1,27/30] RISC-V: Add initial StarFive JH7110 device tree

Message ID 20220930074914.6757-1-hal.feng@linux.starfivetech.com
State New
Headers show
Series Basic StarFive JH7110 RISC-V SoC support | expand

Commit Message

Hal Feng Sept. 30, 2022, 7:49 a.m. UTC
From: Emil Renner Berthing <kernel@esmil.dk>

Add initial device tree for the JH7110 RISC-V SoC by
StarFive Technology Ltd.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++++++++++++++++
 1 file changed, 449 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi

Comments

Conor Dooley Oct. 1, 2022, 10:52 a.m. UTC | #1
On Fri, Sep 30, 2022 at 03:49:14PM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
> 
> Add initial device tree for the JH7110 RISC-V SoC by
> StarFive Technology Ltd.
> 
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>

There's little point reviewing this dt since there's a load of issues
that you can trivially find by running dtbs_check/dt_binding_check, but
this SoB change is wrong - if Emil wrote the patch, then Jianlong's SoB
is either redundant or should be accompanied by a Co-developed-by tag.

Ditto for patch 28/30 "RISC-V: Add StarFive JH7110 VisionFive2 board
device tree".

> ---
>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++++++++++++++++
>  1 file changed, 449 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> new file mode 100644
> index 000000000000..46f418d4198a
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi

> +
> +	osc: osc {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +	};
> +
> +	clk_rtc: clk_rtc {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +	};
> +
> +	gmac0_rmii_refin: gmac0_rmii_refin {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;

I assume, given osc has it's frequency set in the board dts, that these
are all oscillators on the SoC?

> +	};
> +
> +	gmac0_rgmii_rxin: gmac0_rgmii_rxin {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <125000000>;
> +	};
> +
> +	gmac1_rmii_refin: gmac1_rmii_refin {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	gmac1_rgmii_rxin: gmac1_rgmii_rxin {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <125000000>;
> +	};
> +
> +	i2stx_bclk_ext: i2stx_bclk_ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +	};
> +
> +	i2stx_lrck_ext: i2stx_lrck_ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <192000>;
> +	};
> +
> +	i2srx_bclk_ext: i2srx_bclk_ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +	};
> +
> +	i2srx_lrck_ext: i2srx_lrck_ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <192000>;
> +	};
> +
> +	tdm_ext: tdm_ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <49152000>;
> +	};
> +
> +	mclk_ext: mclk_ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <49152000>;
> +	};

> +		syscrg: syscrg@13020000 {

The generic node name for syscons is just "syscon" afaik.

> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x0 0x13020000 0x0 0x10000>;
> +

> +		aoncrg: aoncrg@17000000 {

Again, syscon as the node name?

> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x0 0x17000000 0x0 0x10000>;
> +
> +		gpio: gpio@13040000 {

Someone else (Krzysztof maybe?) should comment, but is "pinctrl" not the
genric node name for pinctrl nodes?

Thanks,
Conor.

> +			compatible = "starfive,jh7110-sys-pinctrl";
> +			reg = <0x0 0x13040000 0x0 0x10000>;
> +			reg-names = "control";
> +			clocks = <&syscrg_clk JH7110_SYSCLK_IOMUX>;
> +			resets = <&syscrg_rst JH7110_SYSRST_IOMUX>;
> +			interrupts = <86>;
> +			interrupt-controller;
> +			#gpio-cells = <2>;
> +			ngpios = <64>;
> +		};
> +
> +		gpioa: gpio@17020000 {
> +			compatible = "starfive,jh7110-aon-pinctrl";
> +			reg = <0x0 0x17020000 0x0 0x10000>;
> +			reg-names = "control";
> +			resets = <&aoncrg_rst JH7110_AONRST_AON_IOMUX>;
> +			interrupts = <85>;
> +			interrupt-controller;
> +			#gpio-cells = <2>;
> +			ngpios = <4>;
> +		};
> +
> +		uart0: serial@10000000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x0 0x10000000 0x0 0x10000>;
> +			clocks = <&syscrg_clk JH7110_SYSCLK_UART0_CORE>,
> +				 <&syscrg_clk JH7110_SYSCLK_UART0_APB>;
> +			clock-names = "baudclk", "apb_pclk";
> +			resets = <&syscrg_rst JH7110_SYSRST_UART0_APB>,
> +				 <&syscrg_rst JH7110_SYSRST_UART0_CORE>;
> +			interrupts = <32>;
> +			reg-io-width = <4>;
> +			reg-shift = <2>;
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@10010000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x0 0x10010000 0x0 0x10000>;
> +			clocks = <&syscrg_clk JH7110_SYSCLK_UART1_CORE>,
> +				 <&syscrg_clk JH7110_SYSCLK_UART1_APB>;
> +			clock-names = "baudclk", "apb_pclk";
> +			resets = <&syscrg_rst JH7110_SYSRST_UART1_APB>,
> +				 <&syscrg_rst JH7110_SYSRST_UART1_CORE>;
> +			interrupts = <33>;
> +			reg-io-width = <4>;
> +			reg-shift = <2>;
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@10020000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x0 0x10020000 0x0 0x10000>;
> +			clocks = <&syscrg_clk JH7110_SYSCLK_UART2_CORE>,
> +				 <&syscrg_clk JH7110_SYSCLK_UART2_APB>;
> +			clock-names = "baudclk", "apb_pclk";
> +			resets = <&syscrg_rst JH7110_SYSRST_UART2_APB>,
> +				 <&syscrg_rst JH7110_SYSRST_UART2_CORE>;
> +			interrupts = <34>;
> +			reg-io-width = <4>;
> +			reg-shift = <2>;
> +			status = "disabled";
> +		};
> +
> +		uart3: serial@12000000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x0 0x12000000 0x0 0x10000>;
> +			clocks = <&syscrg_clk JH7110_SYSCLK_UART3_CORE>,
> +				 <&syscrg_clk JH7110_SYSCLK_UART3_APB>;
> +			clock-names = "baudclk", "apb_pclk";
> +			resets = <&syscrg_rst JH7110_SYSRST_UART3_APB>,
> +				 <&syscrg_rst JH7110_SYSRST_UART3_CORE>;
> +			interrupts = <45>;
> +			reg-io-width = <4>;
> +			reg-shift = <2>;
> +			status = "disabled";
> +		};
> +
> +		uart4: serial@12010000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x0 0x12010000 0x0 0x10000>;
> +			clocks = <&syscrg_clk JH7110_SYSCLK_UART4_CORE>,
> +				 <&syscrg_clk JH7110_SYSCLK_UART4_APB>;
> +			clock-names = "baudclk", "apb_pclk";
> +			resets = <&syscrg_rst JH7110_SYSRST_UART4_APB>,
> +				 <&syscrg_rst JH7110_SYSRST_UART4_CORE>;
> +			interrupts = <46>;
> +			reg-io-width = <4>;
> +			reg-shift = <2>;
> +			status = "disabled";
> +		};
> +
> +		uart5: serial@12020000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x0 0x12020000 0x0 0x10000>;
> +			clocks = <&syscrg_clk JH7110_SYSCLK_UART5_CORE>,
> +				 <&syscrg_clk JH7110_SYSCLK_UART5_APB>;
> +			clock-names = "baudclk", "apb_pclk";
> +			resets = <&syscrg_rst JH7110_SYSRST_UART5_APB>,
> +				 <&syscrg_rst JH7110_SYSRST_UART5_CORE>;
> +			interrupts = <47>;
> +			reg-io-width = <4>;
> +			reg-shift = <2>;
> +			status = "disabled";
> +		};
> +	};
> +};
> -- 
> 2.17.1
>
Krzysztof Kozlowski Oct. 3, 2022, 7:45 a.m. UTC | #2
On 01/10/2022 12:52, Conor Dooley wrote:
> On Fri, Sep 30, 2022 at 03:49:14PM +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>>
>> Add initial device tree for the JH7110 RISC-V SoC by
>> StarFive Technology Ltd.
>>
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
>> Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
> 
> There's little point reviewing this dt since there's a load of issues
> that you can trivially find by running dtbs_check/dt_binding_check, but

Yep...

> this SoB change is wrong - if Emil wrote the patch, then Jianlong's SoB
> is either redundant or should be accompanied by a Co-developed-by tag.

Depends. Jianlong might have just rebased the patch.

> 
> Ditto for patch 28/30 "RISC-V: Add StarFive JH7110 VisionFive2 board
> device tree".
> 
>> ---
>>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++++++++++++++++
>>  1 file changed, 449 insertions(+)
>>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> new file mode 100644
>> index 000000000000..46f418d4198a
>> --- /dev/null
>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> 
>> +
>> +	osc: osc {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	clk_rtc: clk_rtc {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	gmac0_rmii_refin: gmac0_rmii_refin {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <50000000>;
> 
> I assume, given osc has it's frequency set in the board dts, that these
> are all oscillators on the SoC?
> 
>> +	};
>> +
>> +	gmac0_rgmii_rxin: gmac0_rgmii_rxin {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <125000000>;
>> +	};
>> +
>> +	gmac1_rmii_refin: gmac1_rmii_refin {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <50000000>;
>> +	};
>> +
>> +	gmac1_rgmii_rxin: gmac1_rgmii_rxin {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <125000000>;
>> +	};
>> +
>> +	i2stx_bclk_ext: i2stx_bclk_ext {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <12288000>;
>> +	};
>> +
>> +	i2stx_lrck_ext: i2stx_lrck_ext {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <192000>;
>> +	};
>> +
>> +	i2srx_bclk_ext: i2srx_bclk_ext {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <12288000>;
>> +	};
>> +
>> +	i2srx_lrck_ext: i2srx_lrck_ext {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <192000>;
>> +	};
>> +
>> +	tdm_ext: tdm_ext {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <49152000>;
>> +	};
>> +
>> +	mclk_ext: mclk_ext {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <49152000>;
>> +	};
> 
>> +		syscrg: syscrg@13020000 {
> 
> The generic node name for syscons is just "syscon" afaik.

Yes.

> 
>> +			compatible = "syscon", "simple-mfd";

And this is not allowed. Needs specific compatible.


>> +			reg = <0x0 0x13020000 0x0 0x10000>;
>> +
> 
>> +		aoncrg: aoncrg@17000000 {
> 
> Again, syscon as the node name?

Yes.

> 
>> +			compatible = "syscon", "simple-mfd";

And this is a NAK.

>> +			reg = <0x0 0x17000000 0x0 0x10000>;
>> +
>> +		gpio: gpio@13040000 {
> 
> Someone else (Krzysztof maybe?) should comment, but is "pinctrl" not the
> genric node name for pinctrl nodes?

Yes, for pin controller nodes, this should be "pinctrl" and schema
requires it. The problem was that his driver did not use generic pinctrl
bindings, which is no-go on its own.

This could be a gpio controller (so "gpio" would be fine), although
compatible suggests otherwise.


Best regards,
Krzysztof
Hal Feng Oct. 14, 2022, 9:41 a.m. UTC | #3
On Sat, 1 Oct 2022 11:52:00 +0100, Conor Dooley wrote:
> On Fri, Sep 30, 2022 at 03:49:14PM +0800, Hal Feng wrote:
> > From: Emil Renner Berthing <kernel@esmil.dk>
> > 
> > Add initial device tree for the JH7110 RISC-V SoC by
> > StarFive Technology Ltd.
> > 
> > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> > Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> > Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
> 
> There's little point reviewing this dt since there's a load of issues
> that you can trivially find by running dtbs_check/dt_binding_check, but
> this SoB change is wrong - if Emil wrote the patch, then Jianlong's SoB
> is either redundant or should be accompanied by a Co-developed-by tag.
> 
> Ditto for patch 28/30 "RISC-V: Add StarFive JH7110 VisionFive2 board
> device tree".

Will add Co-developed-by tag for Jianlong. Thanks.

> 
> > ---
> >  arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++++++++++++++++
> >  1 file changed, 449 insertions(+)
> >  create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
> > 
> > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > new file mode 100644
> > index 000000000000..46f418d4198a
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> 
> > +
> > +	osc: osc {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +	};
> > +
> > +	clk_rtc: clk_rtc {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +	};
> > +
> > +	gmac0_rmii_refin: gmac0_rmii_refin {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <50000000>;
> 
> I assume, given osc has it's frequency set in the board dts, that these
> are all oscillators on the SoC?

These are all on the board. Should move all "clock-frequency" to the board dts.
I will recheck and modify this patch.

Best regards,
Hal
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..46f418d4198a
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,449 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7110-sys.h>
+#include <dt-bindings/clock/starfive-jh7110-aon.h>
+#include <dt-bindings/reset/starfive-jh7110.h>
+
+/ {
+	compatible = "starfive,jh7110";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <8192>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <16384>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imac";
+			tlb-split;
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu2: cpu@2 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <2>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu3: cpu@3 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <3>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu4: cpu@4 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <4>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
+	};
+
+	osc: osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	clk_rtc: clk_rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	gmac0_rmii_refin: gmac0_rmii_refin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	gmac0_rgmii_rxin: gmac0_rgmii_rxin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	gmac1_rmii_refin: gmac1_rmii_refin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	gmac1_rgmii_rxin: gmac1_rgmii_rxin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	i2stx_bclk_ext: i2stx_bclk_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	i2stx_lrck_ext: i2stx_lrck_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <192000>;
+	};
+
+	i2srx_bclk_ext: i2srx_bclk_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	i2srx_lrck_ext: i2srx_lrck_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <192000>;
+	};
+
+	tdm_ext: tdm_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <49152000>;
+	};
+
+	mclk_ext: mclk_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <49152000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: clint@2000000 {
+			compatible = "starfive,jh7110-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+		};
+
+		plic: plic@c000000 {
+			compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			riscv,ndev = <136>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7110-ccache", "cache";
+			reg = <0x0 0x2010000 0x0 0x4000>;
+			interrupts = <1>, <3>, <4>, <2>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+		};
+
+		syscrg: syscrg@13020000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0x13020000 0x0 0x10000>;
+
+			syscrg_clk: clock-controller@13020000 {
+				compatible = "starfive,jh7110-clkgen-sys";
+				clocks = <&osc>, <&gmac1_rmii_refin>,
+					 <&gmac1_rgmii_rxin>,
+					 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+					 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+					 <&tdm_ext>, <&mclk_ext>;
+				clock-names = "osc", "gmac1_rmii_refin",
+					"gmac1_rgmii_rxin",
+					"i2stx_bclk_ext", "i2stx_lrck_ext",
+					"i2srx_bclk_ext", "i2srx_lrck_ext",
+					"tdm_ext", "mclk_ext";
+				#clock-cells = <1>;
+			};
+
+			syscrg_rst: reset-controller@13020000 {
+				compatible = "starfive,jh7110-reset";
+				#reset-cells = <1>;
+				starfive,assert-offset = <0x2F8>;
+				starfive,status-offset= <0x308>;
+				starfive,nr-resets = <JH7110_SYSRST_END>;
+			};
+		};
+
+		aoncrg: aoncrg@17000000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0x17000000 0x0 0x10000>;
+
+			aoncrg_clk: clock-controller@17000000 {
+				compatible = "starfive,jh7110-clkgen-aon";
+				clocks = <&osc>, <&clk_rtc>,
+					 <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
+					 <&syscrg_clk JH7110_SYSCLK_STG_AXIAHB>,
+					 <&syscrg_clk JH7110_SYSCLK_APB_BUS_FUNC>;
+				clock-names = "osc", "clk_rtc",
+					"gmac0_rmii_refin", "gmac0_rgmii_rxin",
+					"stg_axiahb", "apb_bus_func";
+				#clock-cells = <1>;
+			};
+
+			aoncrg_rst: reset-controller@17000000 {
+				compatible = "starfive,jh7110-reset";
+				#reset-cells = <1>;
+				starfive,assert-offset = <0x38>;
+				starfive,status-offset= <0x3C>;
+				starfive,nr-resets = <JH7110_AONRST_END>;
+			};
+		};
+
+		gpio: gpio@13040000 {
+			compatible = "starfive,jh7110-sys-pinctrl";
+			reg = <0x0 0x13040000 0x0 0x10000>;
+			reg-names = "control";
+			clocks = <&syscrg_clk JH7110_SYSCLK_IOMUX>;
+			resets = <&syscrg_rst JH7110_SYSRST_IOMUX>;
+			interrupts = <86>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			ngpios = <64>;
+		};
+
+		gpioa: gpio@17020000 {
+			compatible = "starfive,jh7110-aon-pinctrl";
+			reg = <0x0 0x17020000 0x0 0x10000>;
+			reg-names = "control";
+			resets = <&aoncrg_rst JH7110_AONRST_AON_IOMUX>;
+			interrupts = <85>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			ngpios = <4>;
+		};
+
+		uart0: serial@10000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&syscrg_clk JH7110_SYSCLK_UART0_CORE>,
+				 <&syscrg_clk JH7110_SYSCLK_UART0_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg_rst JH7110_SYSRST_UART0_APB>,
+				 <&syscrg_rst JH7110_SYSRST_UART0_CORE>;
+			interrupts = <32>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart1: serial@10010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&syscrg_clk JH7110_SYSCLK_UART1_CORE>,
+				 <&syscrg_clk JH7110_SYSCLK_UART1_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg_rst JH7110_SYSRST_UART1_APB>,
+				 <&syscrg_rst JH7110_SYSRST_UART1_CORE>;
+			interrupts = <33>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart2: serial@10020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10020000 0x0 0x10000>;
+			clocks = <&syscrg_clk JH7110_SYSCLK_UART2_CORE>,
+				 <&syscrg_clk JH7110_SYSCLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg_rst JH7110_SYSRST_UART2_APB>,
+				 <&syscrg_rst JH7110_SYSRST_UART2_CORE>;
+			interrupts = <34>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart3: serial@12000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12000000 0x0 0x10000>;
+			clocks = <&syscrg_clk JH7110_SYSCLK_UART3_CORE>,
+				 <&syscrg_clk JH7110_SYSCLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg_rst JH7110_SYSRST_UART3_APB>,
+				 <&syscrg_rst JH7110_SYSRST_UART3_CORE>;
+			interrupts = <45>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart4: serial@12010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12010000 0x0 0x10000>;
+			clocks = <&syscrg_clk JH7110_SYSCLK_UART4_CORE>,
+				 <&syscrg_clk JH7110_SYSCLK_UART4_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg_rst JH7110_SYSRST_UART4_APB>,
+				 <&syscrg_rst JH7110_SYSRST_UART4_CORE>;
+			interrupts = <46>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart5: serial@12020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12020000 0x0 0x10000>;
+			clocks = <&syscrg_clk JH7110_SYSCLK_UART5_CORE>,
+				 <&syscrg_clk JH7110_SYSCLK_UART5_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg_rst JH7110_SYSRST_UART5_APB>,
+				 <&syscrg_rst JH7110_SYSRST_UART5_CORE>;
+			interrupts = <47>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+	};
+};