From patchwork Tue Nov 8 16:38:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 623141 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 55283C433FE for ; Tue, 8 Nov 2022 16:40:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233961AbiKHQkH (ORCPT ); Tue, 8 Nov 2022 11:40:07 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59924 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233914AbiKHQkG (ORCPT ); Tue, 8 Nov 2022 11:40:06 -0500 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2128.outbound.protection.outlook.com [40.107.215.128]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BB967528B9; Tue, 8 Nov 2022 08:40:04 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=R52aBbWBbjRYhkwMiV5eclJfvR+cXtz9+blnraPFZ6MKv0A6I0NzT2YbYlELKMnPnq9NZSKmUU5D9uhhBjq03BNunJ55VCfcQzreJA8omYwju/cMHPmDVx8yevRmXoVq8RArUGowXucj0cjK9jdMUQduccTySeMolFpgF6QT0pYYbadnonIgd/mBtduKGePtVRxUVMZiI/8h3pb4GtUCResbHD6btBIgOb3chYih1amkxCvAzh7gUk+vMAZsZxhIe+GO9edJGcxA7XxX2KS2UTUsGGLGV1KOwOhi+5cLrsVXmwxSC/hTBU38svgEJX6+7QT4lB4KZ8Y8Mzfa6ebhKA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=xFkfl8BMcTxRxA3ZXlcrRWEgwr78dffkPnc+Q+MgP0M=; b=mrFy0Ich8WNlJD28crU0OPHHPBTTgo+Yg2F1XLKnj646RYWk2B4MWYSKn8UnrDgMkvO3iUkcm52KhYRGW60SHiPJmP0vO7sb4UTyKdkTjJ9P5pvPJMUrB/y9pbibGuLDiu58tUAN/Nokj8e03wwMDBDnuC4k/ORgn7sWErbwMdhDHWskWmZM5UlrGCIYH/SAZn8GkWKbq9yic1Tq/oaORShCxrURXuJIgo1ZQj3Xl1z8lEidqtZjPoEFrmPQ2FNWG8gQMOn8/ZZJYQToA9Cfw3a1H57qNRdnCWge2XvdKptYLIk/cyb40+NR3JFCA/XwzOKEnIDCX1P9MoNljn7lyQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) by PSAPR06MB4454.apcprd06.prod.outlook.com (2603:1096:301:8a::10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5791.27; Tue, 8 Nov 2022 16:40:01 +0000 Received: from SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5]) by SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5%5]) with mapi id 15.20.5791.025; Tue, 8 Nov 2022 16:40:01 +0000 From: chengwei To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, chengwei , Javier Arteaga , Nicola Lunghi Subject: [PATCH V2 1/3] mfd: Add support for UP board CPLD/FPGA Date: Wed, 9 Nov 2022 00:38:50 +0800 Message-Id: <20221108163852.15926-2-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20221108163852.15926-1-larry.lai@yunjingtech.com> References: <20221108163852.15926-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: SI2PR02CA0001.apcprd02.prod.outlook.com (2603:1096:4:194::10) To SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SG2PR06MB3742:EE_|PSAPR06MB4454:EE_ X-MS-Office365-Filtering-Correlation-Id: 66da6a39-6d9c-4aa3-72a9-08dac1a7e166 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SG2PR06MB3742.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230022)(346002)(376002)(39830400003)(396003)(366004)(136003)(451199015)(7416002)(8936002)(41300700001)(30864003)(38350700002)(38100700002)(52116002)(6666004)(6506007)(4326008)(66946007)(83380400001)(2906002)(66556008)(66476007)(6512007)(26005)(54906003)(316002)(5660300002)(86362001)(478600001)(6486002)(186003)(36756003)(2616005)(8676002)(1076003)(43062005); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: 66da6a39-6d9c-4aa3-72a9-08dac1a7e166 X-MS-Exchange-CrossTenant-AuthSource: SG2PR06MB3742.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 08 Nov 2022 16:40:01.4133 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: vLSCnpIOOtvBvIoZucf8VkZVRIOSnxkZDznw8VFvmyI8XaxTJDAaZWMHwSmpk5xU9y4A7A2RSR0+7DsxVNtkc/fC9UsxqmNn4aqoteGummM= X-MS-Exchange-Transport-CrossTenantHeadersStamped: PSAPR06MB4454 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org The UP Squared board implements certain features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA. This mfd driver implements the line protocol to read and write registers from the FPGA through regmap. The register address map is also included. The UP Boards provide a few I/O pin headers (for both GPIO and functions), including a 40-pin Raspberry Pi compatible header. This patch implements support for the FPGA-based pin controller that manages direction and enable state for those header pins. Partial support UP boards: * UP core + CREX * UP core + CRST02 PATCH V2: (1) Synchronizing upboard github to rc2 (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues. Signed-off-by: Javier Arteaga [merge various fixes] Signed-off-by: Nicola Lunghi Signed-off-by: chengwei --- drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/upboard-fpga.c | 632 +++++++++++++++++++++++++++++++ include/linux/mfd/upboard-fpga.h | 56 +++ 4 files changed, 701 insertions(+) create mode 100644 drivers/mfd/upboard-fpga.c create mode 100644 include/linux/mfd/upboard-fpga.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index abb58ab1a1a4..c1d72a70e5f2 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2104,6 +2104,18 @@ config MFD_QCOM_PM8008 under it in the device tree. Additional drivers must be enabled in order to use the functionality of the device. +config MFD_UPBOARD_FPGA + tristate "Support for the UP board FPGA" + select MFD_CORE + depends on X86 && ACPI + help + Select this option to enable the Intel AAEON UP and UP^2 on-board FPGA. + The UP board implements certain features (pin control, onboard LEDs or + CEC) through an on-board FPGA. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 858cacf659d6..d9d10e3664f7 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -250,6 +250,7 @@ obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o +obj-$(CONFIG_MFD_UPBOARD_FPGA) += upboard-fpga.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o diff --git a/drivers/mfd/upboard-fpga.c b/drivers/mfd/upboard-fpga.c new file mode 100644 index 000000000000..a38f3d3375b2 --- /dev/null +++ b/drivers/mfd/upboard-fpga.c @@ -0,0 +1,632 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board main platform driver and FPGA configuration support + * + * Copyright (c) 2021, Emutex Ltd. All rights reserved. + * + * Author: Javier Arteaga + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct upboard_fpga_data { + const struct regmap_config *regmapconf; + const struct mfd_cell *cells; + size_t ncells; +}; + +#define UPBOARD_LED_CELL(led_data, n) \ + { \ + .name = "upboard-led", \ + .id = (n), \ + .platform_data = &led_data[(n)], \ + .pdata_size = sizeof(*(led_data)), \ + } + +#define AAEON_MANUFACTURER_ID 0x01 +#define SUPPORTED_FW_MAJOR 0x0 +#define MENUFACTURER_ID_MASK 0xFF + +#define FIRMWARE_ID_BUILD_OFFSET 12 +#define FIRMWARE_ID_MAJOR_OFFSET 8 +#define FIRMWARE_ID_MINOR_OFFSET 4 +#define FIRMWARE_ID_PATCH_OFFSET 0 +#define FIRMWARE_ID_MASK 0xF + +#define UPFPGA_QUIRK_UNINITIALISED BIT(0) +#define UPFPGA_QUIRK_HRV1_IS_PROTO2 BIT(1) +#define UPFPGA_QUIRK_GPIO_LED BIT(2) + +#define UPBOARD_DEVID 0 + +/* UP-CREX carrier board for UP Core */ + +/* same MAXV config as UP1 (proto2 release) */ +#define upboard_upcore_crex_fpga_data upboard_up_fpga_data + +#define APL_GPIO_218 507 + +/* UP board */ + +static int upboard_fpga_read(void *context, unsigned int reg, unsigned int *val) +{ + struct upboard_fpga * const fpga = context; + int i; + + if (IS_ERR(fpga->clear_gpio)) //for none fpga boards + return 0; + + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + reg |= UPFPGA_READ_FLAG; + + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, (reg >> i) & 0x1); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + *val = 0; + + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + *val |= gpiod_get_value(fpga->dataout_gpio) << i; + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static int upboard_fpga_write(void *context, unsigned int reg, unsigned int val) +{ + struct upboard_fpga * const fpga = context; + int i; + + if (IS_ERR(fpga->clear_gpio)) //for none fpga boards + return 0; + + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, (reg >> i) & 0x1); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->datain_gpio, (val >> i) & 0x1); + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static const struct regmap_range upboard_up_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_range upboard_up_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_access_table upboard_up_readable_table = { + .yes_ranges = upboard_up_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_readable_ranges), +}; + +static const struct regmap_access_table upboard_up_writable_table = { + .yes_ranges = upboard_up_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_writable_ranges), +}; + +static const struct regmap_config upboard_up_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_RBTREE, + .rd_table = &upboard_up_readable_table, + .wr_table = &upboard_up_writable_table, +}; + +static struct upboard_led_data upboard_up_led_data[] = { + { .bit = 0, .colour = "yellow" }, + { .bit = 1, .colour = "green" }, + { .bit = 2, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up_mfd_cells[] = { + { .name = "upboard-pinctrl" }, + UPBOARD_LED_CELL(upboard_up_led_data, 0), + UPBOARD_LED_CELL(upboard_up_led_data, 1), + UPBOARD_LED_CELL(upboard_up_led_data, 2), +}; + +static const struct upboard_fpga_data upboard_up_fpga_data = { + .regmapconf = &upboard_up_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +//UP-EHL +static const struct mfd_cell upboard_pinctrl_cells[] = { + { .name = "upboard-pinctrl" }, +}; + +static const struct upboard_fpga_data upboard_pinctrl_data = { + .regmapconf = &upboard_up_regmap_config, + .cells = upboard_pinctrl_cells, + .ncells = ARRAY_SIZE(upboard_pinctrl_cells), +}; + +/* UP^2 board */ + +static const struct regmap_range upboard_up2_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_range upboard_up2_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_access_table upboard_up2_readable_table = { + .yes_ranges = upboard_up2_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_readable_ranges), +}; + +static const struct regmap_access_table upboard_up2_writable_table = { + .yes_ranges = upboard_up2_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_writable_ranges), +}; + +static const struct regmap_config upboard_up2_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, +// .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up2_readable_table, + .wr_table = &upboard_up2_writable_table, +}; + +static struct upboard_led_data upboard_up2_led_data[] = { + { .bit = 0, .colour = "blue" }, + { .bit = 1, .colour = "yellow" }, + { .bit = 2, .colour = "green" }, + { .bit = 3, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up2_mfd_cells[] = { + { .name = "upboard-pinctrl" }, + UPBOARD_LED_CELL(upboard_up2_led_data, 0), + UPBOARD_LED_CELL(upboard_up2_led_data, 1), + UPBOARD_LED_CELL(upboard_up2_led_data, 2), + UPBOARD_LED_CELL(upboard_up2_led_data, 3), +}; + +static const struct upboard_fpga_data upboard_up2_fpga_data = { + .regmapconf = &upboard_up2_regmap_config, + .cells = upboard_up2_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up2_mfd_cells), +}; + +/* UP-CRST02 carrier board for UP Core */ + +/* same MAX10 config as UP2, but same LED cells as UP1 */ +static const struct upboard_fpga_data upboard_upcore_crst02_fpga_data = { + .regmapconf = &upboard_up2_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static struct gpio_led upboard_gpio_leds[] = { + { + .name = "upboard:blue:", + .gpio = APL_GPIO_218, + .default_state = LEDS_GPIO_DEFSTATE_KEEP, + }, +}; +static struct gpio_led_platform_data upboard_gpio_led_platform_data = { + .num_leds = ARRAY_SIZE(upboard_gpio_leds), + .leds = upboard_gpio_leds, +}; +static const struct mfd_cell upboard_gpio_led_cells[] = { + { + .name = "leds-gpio", + .id = 0, + .platform_data = &upboard_gpio_led_platform_data, + .pdata_size = sizeof(upboard_gpio_led_platform_data), + }, +}; + +static int __init upboard_fpga_gpio_init(struct upboard_fpga *fpga) +{ + enum gpiod_flags flags; + + flags = fpga->uninitialised ? GPIOD_OUT_LOW : GPIOD_ASIS; + + fpga->enable_gpio = devm_gpiod_get(fpga->dev, "enable", flags); + if (IS_ERR(fpga->enable_gpio)) + return PTR_ERR(fpga->enable_gpio); + + fpga->clear_gpio = devm_gpiod_get(fpga->dev, "clear", GPIOD_OUT_LOW); + if (IS_ERR(fpga->clear_gpio)) + return PTR_ERR(fpga->clear_gpio); + + fpga->strobe_gpio = devm_gpiod_get(fpga->dev, "strobe", GPIOD_OUT_LOW); + if (IS_ERR(fpga->strobe_gpio)) + return PTR_ERR(fpga->strobe_gpio); + + fpga->datain_gpio = devm_gpiod_get(fpga->dev, "datain", GPIOD_OUT_LOW); + if (IS_ERR(fpga->datain_gpio)) + return PTR_ERR(fpga->datain_gpio); + + fpga->dataout_gpio = devm_gpiod_get(fpga->dev, "dataout", GPIOD_IN); + if (IS_ERR(fpga->dataout_gpio)) + return PTR_ERR(fpga->dataout_gpio); + + /* + * The SoC pinctrl driver may not support reserving the GPIO line for + * FPGA reset without causing an undesired reset pulse. This will clear + * any settings on the FPGA, so only do it if we must. + */ + if (fpga->uninitialised) { + fpga->reset_gpio = devm_gpiod_get(fpga->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(fpga->reset_gpio)) + return PTR_ERR(fpga->reset_gpio); + + gpiod_set_value(fpga->reset_gpio, 1); + } + + gpiod_set_value(fpga->enable_gpio, 1); + fpga->uninitialised = false; + + return 0; +} + +static int __init upboard_fpga_detect_firmware(struct upboard_fpga *fpga) +{ + unsigned int platform_id, manufacturer_id; + unsigned int firmware_id, build, major, minor, patch; + int ret; + + if (!fpga) + return -ENOMEM; + + ret = regmap_read(fpga->regmap, UPFPGA_REG_PLATFORM_ID, &platform_id); + if (ret) + return ret; + + manufacturer_id = platform_id & MENUFACTURER_ID_MASK; + if (manufacturer_id != AAEON_MANUFACTURER_ID) { + dev_err(fpga->dev, + "driver not compatible with custom FPGA FW from manufacturer id 0x%02x. Exiting", + manufacturer_id); + return -ENODEV; + } + + ret = regmap_read(fpga->regmap, UPFPGA_REG_FIRMWARE_ID, &firmware_id); + if (ret) + return ret; + + build = (firmware_id >> FIRMWARE_ID_BUILD_OFFSET) & FIRMWARE_ID_MASK; + major = (firmware_id >> FIRMWARE_ID_MAJOR_OFFSET) & FIRMWARE_ID_MASK; + minor = (firmware_id >> FIRMWARE_ID_MINOR_OFFSET) & FIRMWARE_ID_MASK; + patch = (firmware_id >> FIRMWARE_ID_PATCH_OFFSET) & FIRMWARE_ID_MASK; + + if (major != SUPPORTED_FW_MAJOR) { + dev_dbg(fpga->dev, "unsupported FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return -ENODEV; + } + + dev_info(fpga->dev, "compatible FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return 0; +} + +void upboard_led_gpio_init(struct upboard_fpga *fpga) +{ + struct gpio_led blue_led, yellow_led, green_led, red_led; + struct gpio_desc *desc; + int blue_gpio = -1, yellow_gpio = -1, green_gpio = -1, red_gpio = -1, leds = 0; + + desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + blue_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + yellow_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + green_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + red_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + + if (leds == 0) //no leds + return; + + static struct gpio_led upboard_gpio_leds[8]; + + leds = 0; + if (blue_gpio > -1) { + blue_led.name = "upboard:blue:"; + blue_led.gpio = blue_gpio; + blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = blue_led; + } + if (yellow_gpio > -1) { + yellow_led.name = "upboard:yellow:"; + yellow_led.gpio = yellow_gpio; + yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = yellow_led; + } + if (green_gpio > -1) { + green_led.name = "upboard:green:"; + green_led.gpio = green_gpio; + green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = green_led; + } + if (red_gpio > -1) { + red_led.name = "upboard:red:"; + red_led.gpio = red_gpio; + red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = red_led; + } + + static struct gpio_led_platform_data upboard_gpio_led_platform_data; + + upboard_gpio_led_platform_data.num_leds = leds; + upboard_gpio_led_platform_data.leds = upboard_gpio_leds; + + static const struct mfd_cell upboard_gpio_led_cells[] = { + { + .name = "leds-gpio", + .id = 0, + .platform_data = &upboard_gpio_led_platform_data, + .pdata_size = sizeof(upboard_gpio_led_platform_data), + }, + }; + + if (devm_mfd_add_devices(fpga->dev, UPBOARD_DEVID, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL)) { + dev_info(fpga->dev, "Failed to add GPIO leds"); + } +} + +static const struct acpi_device_id upboard_fpga_acpi_match[] = { + { "AANT0000", (kernel_ulong_t)&upboard_pinctrl_data }, + { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data }, + { "AANT0F02", (kernel_ulong_t)&upboard_upcore_crex_fpga_data }, + { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data }, + { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data }, + { } +}; +MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match); + +static const struct dmi_system_id upboard_dmi_table[] __initconst = { + { + .matches = { /* UP */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-CHT01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.4"), + }, + .driver_data = (void *)UPFPGA_QUIRK_UNINITIALISED, + }, + { + .matches = { /* UP2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.3"), + }, + .driver_data = (void *)(UPFPGA_QUIRK_UNINITIALISED | + UPFPGA_QUIRK_HRV1_IS_PROTO2), + }, + { + .matches = { /* UP2 Pro*/ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-APL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.0"), + }, + .driver_data = (void *)UPFPGA_QUIRK_HRV1_IS_PROTO2, + }, + { + .matches = { /* UP2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.4"), + }, + .driver_data = (void *)UPFPGA_QUIRK_HRV1_IS_PROTO2, + }, + { + .matches = { /* UP APL03 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.0"), + }, + .driver_data = (void *)(UPFPGA_QUIRK_HRV1_IS_PROTO2 | + UPFPGA_QUIRK_GPIO_LED), + }, + { + .matches = { /* UP Xtreme */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-WHL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.1"), + }, + }, + { + .matches = { /* UP Xtreme i11 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-TGL01"), + }, + }, + { + .matches = { /* UP Xtreme i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"), + }, + }, + { + .matches = { /* UP Squared 6000*/ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"), + }, + }, + { + .matches = { /* UPS 6000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"), + }, + }, + { }, +}; + +static int __init upboard_fpga_probe(struct platform_device *pdev) +{ + struct upboard_fpga *fpga; + const struct acpi_device_id *id; + const struct upboard_fpga_data *fpga_data; + const struct dmi_system_id *system_id; + acpi_handle handle; + acpi_status status; + unsigned long long hrv; + unsigned long quirks = 0; + int ret; + + id = acpi_match_device(upboard_fpga_acpi_match, &pdev->dev); + if (!id) + return -ENODEV; + + handle = ACPI_HANDLE(&pdev->dev); + status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv); + if (ACPI_FAILURE(status)) { + dev_err(&pdev->dev, "failed to get PCTL revision"); + //return -ENODEV; + } + + system_id = dmi_first_match(upboard_dmi_table); + if (system_id) + quirks = (unsigned long)system_id->driver_data; + + if (hrv == UPFPGA_PROTOCOL_V1_HRV && + (quirks & UPFPGA_QUIRK_HRV1_IS_PROTO2)) + hrv = UPFPGA_PROTOCOL_V2_HRV; + + if (hrv != UPFPGA_PROTOCOL_V2_HRV) { + dev_info(&pdev->dev, "unsupported PCTL revision: %llu", hrv); + //return -ENODEV; + } + + fpga_data = (const struct upboard_fpga_data *) id->driver_data; + + fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL); + if (!fpga) + return -ENOMEM; + + if (quirks & UPFPGA_QUIRK_UNINITIALISED) { + dev_info(&pdev->dev, "FPGA not initialised by this BIOS"); + fpga->uninitialised = true; + } + + dev_set_drvdata(&pdev->dev, fpga); + fpga->dev = &pdev->dev; + fpga->regmap = devm_regmap_init(&pdev->dev, NULL, + fpga, fpga_data->regmapconf); + fpga->regmapconf = fpga_data->regmapconf; + + if (IS_ERR(fpga->regmap)) + return PTR_ERR(fpga->regmap); + + ret = upboard_fpga_gpio_init(fpga); + if (ret) { + dev_err(&pdev->dev, + "failed to initialize FPGA common GPIOs: %d", ret); + //return ret; //ignore fpga error + } else { + ret = upboard_fpga_detect_firmware(fpga); + //if (ret) + // return ret; //ignore fpga error + } + + //gpio leds initialize + upboard_led_gpio_init(fpga); + + if (quirks & UPFPGA_QUIRK_GPIO_LED) { + ret = devm_mfd_add_devices(&pdev->dev, UPBOARD_DEVID, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL); + if (ret) { + dev_err(&pdev->dev, "Failed to add GPIO leds"); + return ret; + } + } + return devm_mfd_add_devices(&pdev->dev, UPBOARD_DEVID, + fpga_data->cells, + fpga_data->ncells, + NULL, 0, NULL); +} + +static struct platform_driver upboard_fpga_driver = { + .driver = { + .name = "upboard-fpga", + .acpi_match_table = upboard_fpga_acpi_match, + }, +}; + +module_platform_driver_probe(upboard_fpga_driver, upboard_fpga_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_AUTHOR("Javier Arteaga "); +MODULE_DESCRIPTION("UP Board FPGA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/upboard-fpga.h b/include/linux/mfd/upboard-fpga.h new file mode 100644 index 000000000000..ce0c822c4216 --- /dev/null +++ b/include/linux/mfd/upboard-fpga.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UP Board main platform driver and FPGA configuration support + * + * Copyright (c) 2021, Emutex Ltd. All rights reserved. + * + * Author: Javier Arteaga + */ + +#ifndef __LINUX_MFD_UPBOARD_FPGA_H +#define __LINUX_MFD_UPBOARD_FPGA_H + +//fpga/EC protocol version +#define UPFPGA_PROTOCOL_V1_HRV 1 +#define UPFPGA_PROTOCOL_V2_HRV 2 + +#define UPFPGA_ADDRESS_SIZE 7 +#define UPFPGA_REGISTER_SIZE 16 + +#define UPFPGA_READ_FLAG (1 << UPFPGA_ADDRESS_SIZE) + +enum upboard_fpgareg { + UPFPGA_REG_PLATFORM_ID = 0x10, + UPFPGA_REG_FIRMWARE_ID = 0x11, + UPFPGA_REG_FUNC_EN0 = 0x20, + UPFPGA_REG_FUNC_EN1 = 0x21, + UPFPGA_REG_GPIO_EN0 = 0x30, + UPFPGA_REG_GPIO_EN1 = 0x31, + UPFPGA_REG_GPIO_EN2 = 0x32, + UPFPGA_REG_GPIO_DIR0 = 0x40, + UPFPGA_REG_GPIO_DIR1 = 0x41, + UPFPGA_REG_GPIO_DIR2 = 0x42, + UPFPGA_REG_MAX, +}; + +struct upboard_fpga { + struct device *dev; + struct regmap *regmap; + const struct regmap_config *regmapconf; + struct gpio_desc *enable_gpio; + struct gpio_desc *reset_gpio; + struct gpio_desc *clear_gpio; + struct gpio_desc *strobe_gpio; + struct gpio_desc *datain_gpio; + struct gpio_desc *dataout_gpio; + bool uninitialised; +}; + +struct upboard_led_data { + unsigned int bit; + const char *colour; +}; + +bool regmap_check_writeable(struct upboard_fpga *fpga, unsigned int reg); + +#endif /* __LINUX_MFD_UPBOARD_FPGA_H */