From patchwork Fri Feb 3 14:17:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hal Feng X-Patchwork-Id: 651525 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DD84AC05027 for ; Fri, 3 Feb 2023 14:18:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232636AbjBCOSs convert rfc822-to-8bit (ORCPT ); Fri, 3 Feb 2023 09:18:48 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37068 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232568AbjBCOS1 (ORCPT ); Fri, 3 Feb 2023 09:18:27 -0500 Received: from ex01.ufhost.com (ex01.ufhost.com [61.152.239.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B94DD17164; Fri, 3 Feb 2023 06:18:07 -0800 (PST) Received: from EXMBX165.cuchost.com (unknown [175.102.18.54]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "EXMBX165", Issuer "EXMBX165" (not verified)) by ex01.ufhost.com (Postfix) with ESMTP id 8F32924E24E; Fri, 3 Feb 2023 22:18:04 +0800 (CST) Received: from EXMBX172.cuchost.com (172.16.6.92) by EXMBX165.cuchost.com (172.16.6.75) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Fri, 3 Feb 2023 22:18:04 +0800 Received: from ubuntu.localdomain (113.72.144.84) by EXMBX172.cuchost.com (172.16.6.92) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Fri, 3 Feb 2023 22:18:03 +0800 From: Hal Feng To: , , CC: Conor Dooley , Palmer Dabbelt , "Rob Herring" , Krzysztof Kozlowski , Linus Walleij , Andreas Schwab , "Emil Renner Berthing" , Jianlong Huang , Hal Feng , Subject: [PATCH v4 1/4] dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl Date: Fri, 3 Feb 2023 22:17:58 +0800 Message-ID: <20230203141801.59083-2-hal.feng@starfivetech.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20230203141801.59083-1-hal.feng@starfivetech.com> References: <20230203141801.59083-1-hal.feng@starfivetech.com> MIME-Version: 1.0 X-Originating-IP: [113.72.144.84] X-ClientProxiedBy: EXCAS066.cuchost.com (172.16.6.26) To EXMBX172.cuchost.com (172.16.6.92) X-YovoleRuleAgent: yovoleflag Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org From: Jianlong Huang Add pinctrl bindings for StarFive JH7110 SoC sys pinctrl controller. Signed-off-by: Jianlong Huang Co-developed-by: Emil Renner Berthing Signed-off-by: Emil Renner Berthing Signed-off-by: Hal Feng --- .../pinctrl/starfive,jh7110-sys-pinctrl.yaml | 141 ++++++++++++++++++ MAINTAINERS | 6 +- .../pinctrl/starfive,jh7110-pinctrl.h | 115 ++++++++++++++ 3 files changed, 260 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml create mode 100644 include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml new file mode 100644 index 000000000000..22554e68ec91 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-sys-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 SYS Pin Controller + +description: | + Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd. + + Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO63 + can be multiplexed and have configurable bias, drive strength, + schmitt trigger etc. + Some peripherals have their I/O go through the 64 "GPIOs". This also + includes a number of other UARTs, I2Cs, SPIs, PWMs etc. + All these peripherals are connected to all 64 GPIOs such that + any GPIO can be set up to be controlled by any of the peripherals. + +maintainers: + - Jianlong Huang + +properties: + compatible: + const: starfive,jh7110-sys-pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to + muxer configuration, bias, input enable/disable, input schmitt + trigger enable/disable, slew-rate and drive strength. + $ref: /schemas/pinctrl/pincfg-node.yaml + additionalProperties: false + + properties: + pinmux: + description: | + The list of GPIOs and their mux settings that properties in the + node apply to. This should be set using the GPIOMUX or PINMUX + macros. + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux + + bias-disable: true + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + drive-strength: + enum: [ 2, 4, 8, 12 ] + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + slew-rate: + maximum: 1 + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + pinctrl@13040000 { + compatible = "starfive,jh7110-sys-pinctrl"; + reg = <0x13040000 0x10000>; + clocks = <&syscrg 112>; + resets = <&syscrg 2>; + interrupts = <86>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + uart0-0 { + tx-pins { + pinmux = <0xff140005>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <0x0E000406>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index f61eb221415b..babd133cdc4b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19890,13 +19890,15 @@ F: Documentation/devicetree/bindings/clock/starfive,jh7100-*.yaml F: drivers/clk/starfive/clk-starfive-jh7100* F: include/dt-bindings/clock/starfive-jh7100*.h -STARFIVE JH7100 PINCTRL DRIVER +STARFIVE JH71X0 PINCTRL DRIVERS M: Emil Renner Berthing +M: Jianlong Huang L: linux-gpio@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml +F: Documentation/devicetree/bindings/pinctrl/starfive,jh71*.yaml F: drivers/pinctrl/starfive/ F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h +F: include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h STARFIVE JH7100 RESET CONTROLLER DRIVER M: Emil Renner Berthing diff --git a/include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h b/include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h new file mode 100644 index 000000000000..57c1659e4bbf --- /dev/null +++ b/include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* + * Copyright (C) 2022 Emil Renner Berthing + * Copyright (C) 2022 StarFive Technology Co., Ltd. + */ + +#ifndef __DT_BINDINGS_PINCTRL_STARFIVE_JH7110_H__ +#define __DT_BINDINGS_PINCTRL_STARFIVE_JH7110_H__ + +/* sys_iomux pins */ +#define PAD_GPIO0 0 +#define PAD_GPIO1 1 +#define PAD_GPIO2 2 +#define PAD_GPIO3 3 +#define PAD_GPIO4 4 +#define PAD_GPIO5 5 +#define PAD_GPIO6 6 +#define PAD_GPIO7 7 +#define PAD_GPIO8 8 +#define PAD_GPIO9 9 +#define PAD_GPIO10 10 +#define PAD_GPIO11 11 +#define PAD_GPIO12 12 +#define PAD_GPIO13 13 +#define PAD_GPIO14 14 +#define PAD_GPIO15 15 +#define PAD_GPIO16 16 +#define PAD_GPIO17 17 +#define PAD_GPIO18 18 +#define PAD_GPIO19 19 +#define PAD_GPIO20 20 +#define PAD_GPIO21 21 +#define PAD_GPIO22 22 +#define PAD_GPIO23 23 +#define PAD_GPIO24 24 +#define PAD_GPIO25 25 +#define PAD_GPIO26 26 +#define PAD_GPIO27 27 +#define PAD_GPIO28 28 +#define PAD_GPIO29 29 +#define PAD_GPIO30 30 +#define PAD_GPIO31 31 +#define PAD_GPIO32 32 +#define PAD_GPIO33 33 +#define PAD_GPIO34 34 +#define PAD_GPIO35 35 +#define PAD_GPIO36 36 +#define PAD_GPIO37 37 +#define PAD_GPIO38 38 +#define PAD_GPIO39 39 +#define PAD_GPIO40 40 +#define PAD_GPIO41 41 +#define PAD_GPIO42 42 +#define PAD_GPIO43 43 +#define PAD_GPIO44 44 +#define PAD_GPIO45 45 +#define PAD_GPIO46 46 +#define PAD_GPIO47 47 +#define PAD_GPIO48 48 +#define PAD_GPIO49 49 +#define PAD_GPIO50 50 +#define PAD_GPIO51 51 +#define PAD_GPIO52 52 +#define PAD_GPIO53 53 +#define PAD_GPIO54 54 +#define PAD_GPIO55 55 +#define PAD_GPIO56 56 +#define PAD_GPIO57 57 +#define PAD_GPIO58 58 +#define PAD_GPIO59 59 +#define PAD_GPIO60 60 +#define PAD_GPIO61 61 +#define PAD_GPIO62 62 +#define PAD_GPIO63 63 +#define PAD_SD0_CLK 64 +#define PAD_SD0_CMD 65 +#define PAD_SD0_DATA0 66 +#define PAD_SD0_DATA1 67 +#define PAD_SD0_DATA2 68 +#define PAD_SD0_DATA3 69 +#define PAD_SD0_DATA4 70 +#define PAD_SD0_DATA5 71 +#define PAD_SD0_DATA6 72 +#define PAD_SD0_DATA7 73 +#define PAD_SD0_STRB 74 +#define PAD_GMAC1_MDC 75 +#define PAD_GMAC1_MDIO 76 +#define PAD_GMAC1_RXD0 77 +#define PAD_GMAC1_RXD1 78 +#define PAD_GMAC1_RXD2 79 +#define PAD_GMAC1_RXD3 80 +#define PAD_GMAC1_RXDV 81 +#define PAD_GMAC1_RXC 82 +#define PAD_GMAC1_TXD0 83 +#define PAD_GMAC1_TXD1 84 +#define PAD_GMAC1_TXD2 85 +#define PAD_GMAC1_TXD3 86 +#define PAD_GMAC1_TXEN 87 +#define PAD_GMAC1_TXC 88 +#define PAD_QSPI_SCLK 89 +#define PAD_QSPI_CS0 90 +#define PAD_QSPI_DATA0 91 +#define PAD_QSPI_DATA1 92 +#define PAD_QSPI_DATA2 93 +#define PAD_QSPI_DATA3 94 + +#define GPOUT_LOW 0 +#define GPOUT_HIGH 1 + +#define GPOEN_ENABLE 0 +#define GPOEN_DISABLE 1 + +#define GPI_NONE 255 + +#endif