diff mbox series

[v5,1/5] usb: Add support for Intel LJCA device

Message ID 20230312190435.3568212-2-xiang.ye@intel.com
State New
Headers show
Series Add Intel LJCA device driver | expand

Commit Message

Ye Xiang March 12, 2023, 7:04 p.m. UTC
This patch implements the USB part of Intel USB-I2C/GPIO/SPI adapter
device named "La Jolla Cove Adapter" (LJCA).

The communication between the various LJCA module drivers and the
hardware will be muxed/demuxed by this driver. The sub-module of
LJCA can use ljca_transfer() to issue a transfer between host
and hardware.

Each sub-module of LJCA device is identified by type field within
the LJCA message header.

The minimum code in ASL that covers this board is
Scope (\_SB.PCI0.DWC3.RHUB.HS01)
    {
        Device (GPIO)
        {
            Name (_ADR, Zero)
            Name (_STA, 0x0F)
        }

        Device (I2C)
        {
            Name (_ADR, One)
            Name (_STA, 0x0F)
        }

        Device (SPI)
        {
            Name (_ADR, 0x02)
            Name (_STA, 0x0F)
        }
    }

Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/usb/misc/Kconfig  |  13 +
 drivers/usb/misc/Makefile |   1 +
 drivers/usb/misc/ljca.c   | 998 ++++++++++++++++++++++++++++++++++++++
 include/linux/usb/ljca.h  |  95 ++++
 4 files changed, 1107 insertions(+)
 create mode 100644 drivers/usb/misc/ljca.c
 create mode 100644 include/linux/usb/ljca.h

Comments

Lee Jones March 13, 2023, 5:03 p.m. UTC | #1
On Mon, 13 Mar 2023, Ye Xiang wrote:

> This patch implements the USB part of Intel USB-I2C/GPIO/SPI adapter
> device named "La Jolla Cove Adapter" (LJCA).
>
> The communication between the various LJCA module drivers and the
> hardware will be muxed/demuxed by this driver. The sub-module of
> LJCA can use ljca_transfer() to issue a transfer between host
> and hardware.
>
> Each sub-module of LJCA device is identified by type field within
> the LJCA message header.
>
> The minimum code in ASL that covers this board is
> Scope (\_SB.PCI0.DWC3.RHUB.HS01)
>     {
>         Device (GPIO)
>         {
>             Name (_ADR, Zero)
>             Name (_STA, 0x0F)
>         }
>
>         Device (I2C)
>         {
>             Name (_ADR, One)
>             Name (_STA, 0x0F)
>         }
>
>         Device (SPI)
>         {
>             Name (_ADR, 0x02)
>             Name (_STA, 0x0F)
>         }
>     }
>
> Signed-off-by: Ye Xiang <xiang.ye@intel.com>
> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>  drivers/usb/misc/Kconfig  |  13 +
>  drivers/usb/misc/Makefile |   1 +
>  drivers/usb/misc/ljca.c   | 998 ++++++++++++++++++++++++++++++++++++++
>  include/linux/usb/ljca.h  |  95 ++++
>  4 files changed, 1107 insertions(+)
>  create mode 100644 drivers/usb/misc/ljca.c
>  create mode 100644 include/linux/usb/ljca.h
>
> diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
> index a5f7652db7da..59ec120c26d4 100644
> --- a/drivers/usb/misc/Kconfig
> +++ b/drivers/usb/misc/Kconfig
> @@ -273,6 +273,19 @@ config USB_LINK_LAYER_TEST
>  	  Layer Test Device. Say Y only when you want to conduct USB Super Speed
>  	  Link Layer Test for host controllers.
>
> +config USB_LJCA
> +	tristate "Intel La Jolla Cove Adapter support"
> +	select MFD_CORE
> +	depends on USB
> +	help
> +	  This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO
> +	  Master Adapter (LJCA). Additional drivers such as I2C_LJCA,
> +	  GPIO_LJCA and SPI_LJCA must be enabled in order to use the
> +	  functionality of the device.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called ljca.
> +
>  config USB_CHAOSKEY
>  	tristate "ChaosKey random number generator driver support"
>  	depends on HW_RANDOM
> diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
> index 93581baec3a8..6f6adfbe17e0 100644
> --- a/drivers/usb/misc/Makefile
> +++ b/drivers/usb/misc/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_USB_HUB_USB251XB)		+= usb251xb.o
>  obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
>  obj-$(CONFIG_USB_HSIC_USB4604)		+= usb4604.o
>  obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
> +obj-$(CONFIG_USB_LJCA)			+= ljca.o
>
>  obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
>  obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
> diff --git a/drivers/usb/misc/ljca.c b/drivers/usb/misc/ljca.c
> new file mode 100644
> index 000000000000..ab98deaf0074
> --- /dev/null
> +++ b/drivers/usb/misc/ljca.c
> @@ -0,0 +1,998 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Intel La Jolla Cove Adapter USB driver
> + *
> + * Copyright (c) 2023, Intel Corporation.
> + */
> +
> +#include <linux/dev_printk.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>

Please don't use the MFD API outside of drivers/mfd.

If you wish to use the API, please do.

Strip out (only) the MFD parts and move them into drivers/mfd.

> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/usb.h>
> +#include <linux/usb/ljca.h>

--
Lee Jones [李琼斯]
Ye Xiang March 14, 2023, 8:03 a.m. UTC | #2
Hi Lee,

Thanks for the review.
On Mon, Mar 13, 2023 at 05:03:41PM +0000, Lee Jones wrote:
> On Mon, 13 Mar 2023, Ye Xiang wrote:
> 
> > This patch implements the USB part of Intel USB-I2C/GPIO/SPI adapter
> > device named "La Jolla Cove Adapter" (LJCA).
> >
> > The communication between the various LJCA module drivers and the
> > hardware will be muxed/demuxed by this driver. The sub-module of
> > LJCA can use ljca_transfer() to issue a transfer between host
> > and hardware.
> >
> > Each sub-module of LJCA device is identified by type field within
> > the LJCA message header.
> >
> > The minimum code in ASL that covers this board is
> > Scope (\_SB.PCI0.DWC3.RHUB.HS01)
> >     {
> >         Device (GPIO)
> >         {
> >             Name (_ADR, Zero)
> >             Name (_STA, 0x0F)
> >         }
> >
> >         Device (I2C)
> >         {
> >             Name (_ADR, One)
> >             Name (_STA, 0x0F)
> >         }
> >
> >         Device (SPI)
> >         {
> >             Name (_ADR, 0x02)
> >             Name (_STA, 0x0F)
> >         }
> >     }
> >
> > Signed-off-by: Ye Xiang <xiang.ye@intel.com>
> > Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > ---
> >  drivers/usb/misc/Kconfig  |  13 +
> >  drivers/usb/misc/Makefile |   1 +
> >  drivers/usb/misc/ljca.c   | 998 ++++++++++++++++++++++++++++++++++++++
> >  include/linux/usb/ljca.h  |  95 ++++
> >  4 files changed, 1107 insertions(+)
> >  create mode 100644 drivers/usb/misc/ljca.c
> >  create mode 100644 include/linux/usb/ljca.h
> >
> > diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
> > index a5f7652db7da..59ec120c26d4 100644
> > --- a/drivers/usb/misc/Kconfig
> > +++ b/drivers/usb/misc/Kconfig
> > @@ -273,6 +273,19 @@ config USB_LINK_LAYER_TEST
> >  	  Layer Test Device. Say Y only when you want to conduct USB Super Speed
> >  	  Link Layer Test for host controllers.
> >
> > +config USB_LJCA
> > +	tristate "Intel La Jolla Cove Adapter support"
> > +	select MFD_CORE
> > +	depends on USB
> > +	help
> > +	  This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO
> > +	  Master Adapter (LJCA). Additional drivers such as I2C_LJCA,
> > +	  GPIO_LJCA and SPI_LJCA must be enabled in order to use the
> > +	  functionality of the device.
> > +
> > +	  This driver can also be built as a module. If so, the module
> > +	  will be called ljca.
> > +
> >  config USB_CHAOSKEY
> >  	tristate "ChaosKey random number generator driver support"
> >  	depends on HW_RANDOM
> > diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
> > index 93581baec3a8..6f6adfbe17e0 100644
> > --- a/drivers/usb/misc/Makefile
> > +++ b/drivers/usb/misc/Makefile
> > @@ -29,6 +29,7 @@ obj-$(CONFIG_USB_HUB_USB251XB)		+= usb251xb.o
> >  obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
> >  obj-$(CONFIG_USB_HSIC_USB4604)		+= usb4604.o
> >  obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
> > +obj-$(CONFIG_USB_LJCA)			+= ljca.o
> >
> >  obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
> >  obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
> > diff --git a/drivers/usb/misc/ljca.c b/drivers/usb/misc/ljca.c
> > new file mode 100644
> > index 000000000000..ab98deaf0074
> > --- /dev/null
> > +++ b/drivers/usb/misc/ljca.c
> > @@ -0,0 +1,998 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Intel La Jolla Cove Adapter USB driver
> > + *
> > + * Copyright (c) 2023, Intel Corporation.
> > + */
> > +
> > +#include <linux/dev_printk.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/core.h>
> 
> Please don't use the MFD API outside of drivers/mfd.
> 
> If you wish to use the API, please do.
> 
> Strip out (only) the MFD parts and move them into drivers/mfd.
I have no idea about how to split MFD parts out from this driver
currently. The MFD part just have mfd cells filling and the call
mfd_add_hotplug_devices to register mfd devices. How to module them
as an independent driver?
Would you give some hints or recommendations?

And I am a little comfused about where this USB device driver should
be put to (drivers/mfd or drivers/usb).

As far as I know, where a driver should be put is based on what
it provides. This driver just do some urb package transfer to provides
multi-functions, such as GPIO function, I2C function, SPI function.
so it should be under drivers/mfd folder. Please correct me, if
something is wrong. Thanks

> 
> > +#include <linux/module.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/mutex.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/types.h>
> > +#include <linux/usb.h>
> > +#include <linux/usb/ljca.h>
>
--
Thanks
Ye Xiang
Heikki Krogerus March 14, 2023, 8:36 a.m. UTC | #3
Hi Xiang,

On Tue, Mar 14, 2023 at 04:03:26PM +0800, Ye, Xiang wrote:
> > Please don't use the MFD API outside of drivers/mfd.
> > 
> > If you wish to use the API, please do.
> > 
> > Strip out (only) the MFD parts and move them into drivers/mfd.
> I have no idea about how to split MFD parts out from this driver
> currently. The MFD part just have mfd cells filling and the call
> mfd_add_hotplug_devices to register mfd devices. How to module them
> as an independent driver?
> Would you give some hints or recommendations?
> 
> And I am a little comfused about where this USB device driver should
> be put to (drivers/mfd or drivers/usb).
> 
> As far as I know, where a driver should be put is based on what
> it provides. This driver just do some urb package transfer to provides
> multi-functions, such as GPIO function, I2C function, SPI function.
> so it should be under drivers/mfd folder. Please correct me, if
> something is wrong. Thanks

You don't really seem to get any benefit from MFD. Perhaps it would be
more appropriate and clear if you just registered auxiliary devices in
this driver. Check drivers/base/auxiliary.c.

thanks,
Ye Xiang March 14, 2023, 3:38 p.m. UTC | #4
Hi Heikki,

Thanks for the review.
On Tue, Mar 14, 2023 at 10:36:57AM +0200, Heikki Krogerus wrote:
> Hi Xiang,
> 
> On Tue, Mar 14, 2023 at 04:03:26PM +0800, Ye, Xiang wrote:
> > > Please don't use the MFD API outside of drivers/mfd.
> > > 
> > > If you wish to use the API, please do.
> > > 
> > > Strip out (only) the MFD parts and move them into drivers/mfd.
> > I have no idea about how to split MFD parts out from this driver
> > currently. The MFD part just have mfd cells filling and the call
> > mfd_add_hotplug_devices to register mfd devices. How to module them
> > as an independent driver?
> > Would you give some hints or recommendations?
> > 
> > And I am a little comfused about where this USB device driver should
> > be put to (drivers/mfd or drivers/usb).
> > 
> > As far as I know, where a driver should be put is based on what
> > it provides. This driver just do some urb package transfer to provides
> > multi-functions, such as GPIO function, I2C function, SPI function.
> > so it should be under drivers/mfd folder. Please correct me, if
> > something is wrong. Thanks
> 
> You don't really seem to get any benefit from MFD. Perhaps it would be
> more appropriate and clear if you just registered auxiliary devices in
> this driver. Check drivers/base/auxiliary.c.
Yes, it should be a work. I have a question.
MFD provides the ACPI binding for sub-devices through
struct mfd_cell_acpi_match. But I didn't see this in drivers/base/auxiliary.c.
If using auxiliary bus to implement the LJCA sub-devices, we need to do
the sub-devices acpi binding manually in ljca.c.

Something Like:
adr = LJCA_ACPI_MATCH_GPIO
adev = acpi_find_child_device(parent, adr, false);
ACPI_COMPANION_SET(&pdev->dev, adev ?: parent);

Is that acceptable?

--
Thanks
Ye Xiang
Andy Shevchenko March 14, 2023, 3:52 p.m. UTC | #5
On Tue, Mar 14, 2023 at 11:38:14PM +0800, Ye, Xiang wrote:
> On Tue, Mar 14, 2023 at 10:36:57AM +0200, Heikki Krogerus wrote:
> > On Tue, Mar 14, 2023 at 04:03:26PM +0800, Ye, Xiang wrote:

...

> > You don't really seem to get any benefit from MFD. Perhaps it would be
> > more appropriate and clear if you just registered auxiliary devices in
> > this driver. Check drivers/base/auxiliary.c.
> Yes, it should be a work. I have a question.
> MFD provides the ACPI binding for sub-devices through
> struct mfd_cell_acpi_match. But I didn't see this in drivers/base/auxiliary.c.
> If using auxiliary bus to implement the LJCA sub-devices, we need to do
> the sub-devices acpi binding manually in ljca.c.
> 
> Something Like:
> adr = LJCA_ACPI_MATCH_GPIO
> adev = acpi_find_child_device(parent, adr, false);
> ACPI_COMPANION_SET(&pdev->dev, adev ?: parent);
> 
> Is that acceptable?

Maybe you can implement this on the level of auxiliary bus.
Heikki Krogerus March 15, 2023, 9:09 a.m. UTC | #6
On Tue, Mar 14, 2023 at 05:52:52PM +0200, Andy Shevchenko wrote:
> On Tue, Mar 14, 2023 at 11:38:14PM +0800, Ye, Xiang wrote:
> > On Tue, Mar 14, 2023 at 10:36:57AM +0200, Heikki Krogerus wrote:
> > > On Tue, Mar 14, 2023 at 04:03:26PM +0800, Ye, Xiang wrote:
> 
> ...
> 
> > > You don't really seem to get any benefit from MFD. Perhaps it would be
> > > more appropriate and clear if you just registered auxiliary devices in
> > > this driver. Check drivers/base/auxiliary.c.
> > Yes, it should be a work. I have a question.
> > MFD provides the ACPI binding for sub-devices through
> > struct mfd_cell_acpi_match. But I didn't see this in drivers/base/auxiliary.c.
> > If using auxiliary bus to implement the LJCA sub-devices, we need to do
> > the sub-devices acpi binding manually in ljca.c.
> > 
> > Something Like:
> > adr = LJCA_ACPI_MATCH_GPIO
> > adev = acpi_find_child_device(parent, adr, false);
> > ACPI_COMPANION_SET(&pdev->dev, adev ?: parent);
> > 
> > Is that acceptable?

Looks ok to me.

> Maybe you can implement this on the level of auxiliary bus.

I would actually prefer that the auxiliary bus itself does not make
any assumptions regarding the whereabouts of the fwnodes at this
stage. Maybe later, when(if) there are more users.

thanks,
Wu, Wentong June 30, 2023, 7:40 a.m. UTC | #7
> -----Original Message-----
> From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Sent: Wednesday, March 15, 2023 5:10 PM
> 
> On Tue, Mar 14, 2023 at 05:52:52PM +0200, Andy Shevchenko wrote:
> > On Tue, Mar 14, 2023 at 11:38:14PM +0800, Ye, Xiang wrote:
> > > On Tue, Mar 14, 2023 at 10:36:57AM +0200, Heikki Krogerus wrote:
> > > > On Tue, Mar 14, 2023 at 04:03:26PM +0800, Ye, Xiang wrote:
> >
> > ...
> >
> > > > You don't really seem to get any benefit from MFD. Perhaps it
> > > > would be more appropriate and clear if you just registered
> > > > auxiliary devices in this driver. Check drivers/base/auxiliary.c.
> > > Yes, it should be a work. I have a question.
> > > MFD provides the ACPI binding for sub-devices through struct
> > > mfd_cell_acpi_match. But I didn't see this in drivers/base/auxiliary.c.
> > > If using auxiliary bus to implement the LJCA sub-devices, we need to
> > > do the sub-devices acpi binding manually in ljca.c.
> > >
> > > Something Like:
> > > adr = LJCA_ACPI_MATCH_GPIO
> > > adev = acpi_find_child_device(parent, adr, false);
> > > ACPI_COMPANION_SET(&pdev->dev, adev ?: parent);
> > >
> > > Is that acceptable?

This actually doesn't work, look at the acpi_find_child_device(), it compares the
bus address specified by _ADR object, but there is no _ADR object in DSDT for
these three devices because the relationship between the parent and children
isn't bus type listed in ACPI spec, so it always return NULL.

BR,
Wentong 

> 
> Looks ok to me.
> 
> > Maybe you can implement this on the level of auxiliary bus.
> 
> I would actually prefer that the auxiliary bus itself does not make any
> assumptions regarding the whereabouts of the fwnodes at this stage. Maybe
> later, when(if) there are more users.
> 
> thanks,
> 
> --
> heikki
Andy Shevchenko June 30, 2023, 5:37 p.m. UTC | #8
On Fri, Jun 30, 2023 at 07:40:48AM +0000, Wu, Wentong wrote:
> > From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > Sent: Wednesday, March 15, 2023 5:10 PM
> > On Tue, Mar 14, 2023 at 05:52:52PM +0200, Andy Shevchenko wrote:
> > > On Tue, Mar 14, 2023 at 11:38:14PM +0800, Ye, Xiang wrote:
> > > > On Tue, Mar 14, 2023 at 10:36:57AM +0200, Heikki Krogerus wrote:
> > > > > On Tue, Mar 14, 2023 at 04:03:26PM +0800, Ye, Xiang wrote:

...

> > > > > You don't really seem to get any benefit from MFD. Perhaps it
> > > > > would be more appropriate and clear if you just registered
> > > > > auxiliary devices in this driver. Check drivers/base/auxiliary.c.
> > > > Yes, it should be a work. I have a question.
> > > > MFD provides the ACPI binding for sub-devices through struct
> > > > mfd_cell_acpi_match. But I didn't see this in drivers/base/auxiliary.c.
> > > > If using auxiliary bus to implement the LJCA sub-devices, we need to
> > > > do the sub-devices acpi binding manually in ljca.c.
> > > >
> > > > Something Like:
> > > > adr = LJCA_ACPI_MATCH_GPIO
> > > > adev = acpi_find_child_device(parent, adr, false);
> > > > ACPI_COMPANION_SET(&pdev->dev, adev ?: parent);
> > > >
> > > > Is that acceptable?
> 
> This actually doesn't work, look at the acpi_find_child_device(), it compares
> the bus address specified by _ADR object, but there is no _ADR object in DSDT
> for these three devices because the relationship between the parent and
> children isn't bus type listed in ACPI spec, so it always return NULL.

If you want to have this on ACPI enabled platform, ACPI table has to have
the necessary bits. What you are describing is a BIOS bug _or_ somebody has
to provide the SSDT overlay depending on the real connection of the device..

> > Looks ok to me.
> > 
> > > Maybe you can implement this on the level of auxiliary bus.
> > 
> > I would actually prefer that the auxiliary bus itself does not make any
> > assumptions regarding the whereabouts of the fwnodes at this stage. Maybe
> > later, when(if) there are more users.
diff mbox series

Patch

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a5f7652db7da..59ec120c26d4 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -273,6 +273,19 @@  config USB_LINK_LAYER_TEST
 	  Layer Test Device. Say Y only when you want to conduct USB Super Speed
 	  Link Layer Test for host controllers.
 
+config USB_LJCA
+	tristate "Intel La Jolla Cove Adapter support"
+	select MFD_CORE
+	depends on USB
+	help
+	  This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO
+	  Master Adapter (LJCA). Additional drivers such as I2C_LJCA,
+	  GPIO_LJCA and SPI_LJCA must be enabled in order to use the
+	  functionality of the device.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ljca.
+
 config USB_CHAOSKEY
 	tristate "ChaosKey random number generator driver support"
 	depends on HW_RANDOM
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 93581baec3a8..6f6adfbe17e0 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -29,6 +29,7 @@  obj-$(CONFIG_USB_HUB_USB251XB)		+= usb251xb.o
 obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
 obj-$(CONFIG_USB_HSIC_USB4604)		+= usb4604.o
 obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
+obj-$(CONFIG_USB_LJCA)			+= ljca.o
 
 obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
 obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
diff --git a/drivers/usb/misc/ljca.c b/drivers/usb/misc/ljca.c
new file mode 100644
index 000000000000..ab98deaf0074
--- /dev/null
+++ b/drivers/usb/misc/ljca.c
@@ -0,0 +1,998 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel La Jolla Cove Adapter USB driver
+ *
+ * Copyright (c) 2023, Intel Corporation.
+ */
+
+#include <linux/dev_printk.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/usb/ljca.h>
+
+enum ljca_acpi_match_adr {
+	LJCA_ACPI_MATCH_GPIO,
+	LJCA_ACPI_MATCH_I2C1,
+	LJCA_ACPI_MATCH_I2C2,
+	LJCA_ACPI_MATCH_SPI1,
+	LJCA_ACPI_MATCH_SPI2,
+};
+
+static struct mfd_cell_acpi_match ljca_acpi_match_gpio = {
+	.adr = LJCA_ACPI_MATCH_GPIO,
+};
+
+static struct mfd_cell_acpi_match ljca_acpi_match_i2cs[] = {
+	{
+		.adr = LJCA_ACPI_MATCH_I2C1,
+	},
+	{
+		.adr = LJCA_ACPI_MATCH_I2C2,
+	},
+};
+
+static struct mfd_cell_acpi_match ljca_acpi_match_spis[] = {
+	{
+		.adr = LJCA_ACPI_MATCH_SPI1,
+	},
+	{
+		.adr = LJCA_ACPI_MATCH_SPI2,
+	},
+};
+
+struct ljca_msg {
+	u8 type;
+	u8 cmd;
+	u8 flags;
+	u8 len;
+	u8 data[];
+} __packed;
+
+struct fw_version {
+	u8 major;
+	u8 minor;
+	__le16 patch;
+	__le16 build;
+} __packed;
+
+/**
+ * enum ljca_stub_type - Stub type supported by LJCA.
+ * @LJCA_MNG_STUB: Provides Management messages.
+ * @LJCA_DIAG_STUB: provides Diagnose messages.
+ * @LJCA_GPIO_STUB: provides GPIO functionality.
+ * @LJCA_I2C_STUB: provides I2C functionality.
+ * @LJCA_SPI_STUB: provides SPI functionality.
+ */
+enum ljca_stub_type {
+	LJCA_MNG_STUB = 1,
+	LJCA_DIAG_STUB,
+	LJCA_GPIO_STUB,
+	LJCA_I2C_STUB,
+	LJCA_SPI_STUB,
+};
+
+/* command Flags */
+#define LJCA_ACK_FLAG	BIT(0)
+#define LJCA_RESP_FLAG	BIT(1)
+#define LJCA_CMPL_FLAG	BIT(2)
+
+/* MNG stub commands */
+enum ljca_mng_cmd {
+	LJCA_MNG_GET_VERSION = 1,
+	LJCA_MNG_RESET_NOTIFY,
+	LJCA_MNG_RESET,
+	LJCA_MNG_ENUM_GPIO,
+	LJCA_MNG_ENUM_I2C,
+	LJCA_MNG_POWER_STATE_CHANGE,
+	LJCA_MNG_SET_DFU_MODE,
+	LJCA_MNG_ENUM_SPI,
+};
+
+/* DIAG commands */
+enum ljca_diag_cmd {
+	LJCA_DIAG_GET_STATE = 1,
+	LJCA_DIAG_GET_STATISTIC,
+	LJCA_DIAG_SET_TRACE_LEVEL,
+	LJCA_DIAG_SET_ECHO_MODE,
+	LJCA_DIAG_GET_FW_LOG,
+	LJCA_DIAG_GET_FW_COREDUMP,
+	LJCA_DIAG_TRIGGER_WDT,
+	LJCA_DIAG_TRIGGER_FAULT,
+	LJCA_DIAG_FEED_WDT,
+	LJCA_DIAG_GET_SECURE_STATE,
+};
+
+struct ljca_i2c_ctr_info {
+	u8 id;
+	u8 capacity;
+	u8 intr_pin;
+} __packed;
+
+struct ljca_i2c_descriptor {
+	u8 num;
+	struct ljca_i2c_ctr_info info[];
+} __packed;
+
+struct ljca_spi_ctr_info {
+	u8 id;
+	u8 capacity;
+} __packed;
+
+struct ljca_spi_descriptor {
+	u8 num;
+	struct ljca_spi_ctr_info info[];
+} __packed;
+
+struct ljca_bank_descriptor {
+	u8 bank_id;
+	u8 pin_num;
+
+	/* 1 bit for each gpio, 1 means valid */
+	u32 valid_pins;
+} __packed;
+
+struct ljca_gpio_descriptor {
+	u8 pins_per_bank;
+	u8 bank_num;
+	struct ljca_bank_descriptor bank_desc[];
+} __packed;
+
+#define LJCA_MAX_PACKET_SIZE	64
+#define LJCA_MAX_PAYLOAD_SIZE (LJCA_MAX_PACKET_SIZE - sizeof(struct ljca_msg))
+#define LJCA_USB_WRITE_TIMEOUT_MS	200
+#define LJCA_USB_WRITE_ACK_TIMEOUT_MS	500
+#define LJCA_USB_ENUM_STUB_TIMEOUT_MS	20
+
+struct ljca_event_cb_entry {
+	ljca_event_cb_t notify;
+	void *context;
+};
+
+struct ljca_dev {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	u8 in_ep; /* the address of the bulk in endpoint */
+	u8 out_ep; /* the address of the bulk out endpoint */
+
+	/* the urb/buffer for read */
+	struct urb *in_urb;
+	unsigned char *ibuf;
+	size_t ibuf_len;
+
+	bool started;
+	struct list_head stubs_list;
+
+	/* to wait for an ongoing write ack */
+	wait_queue_head_t ack_wq;
+
+	struct mfd_cell *cells;
+	int cell_count;
+	/* mutex to protect package transfer with LJCA device */
+	struct mutex mutex;
+};
+
+struct ljca {
+	u8 type;
+	struct ljca_dev *dev;
+};
+
+struct ljca_stub_packet {
+	unsigned int *ibuf_len;
+	u8 *ibuf;
+};
+
+struct ljca_stub {
+	struct list_head list;
+	struct usb_interface *intf;
+	struct ljca_stub_packet ipacket;
+	u8 type;
+
+	/* for identify ack */
+	bool acked;
+	int cur_cmd;
+
+	struct ljca_event_cb_entry event_entry;
+	/* lock to protect event_entry */
+	spinlock_t event_cb_lock;
+
+	struct ljca ljca;
+	unsigned long priv[];
+};
+
+static inline void *ljca_priv(struct ljca_stub *stub)
+{
+	return stub->priv;
+}
+
+static bool ljca_validate(struct ljca_msg *header, u32 data_len)
+{
+	return header->len + sizeof(*header) == data_len;
+}
+
+static struct ljca_stub *ljca_stub_alloc(struct ljca_dev *dev, u8 type, int priv_size)
+{
+	struct ljca_stub *stub;
+
+	stub = kzalloc(struct_size(stub, priv, priv_size), GFP_KERNEL);
+	if (!stub)
+		return ERR_PTR(-ENOMEM);
+
+	stub->type = type;
+	stub->intf = dev->intf;
+	stub->ljca.dev = dev;
+	stub->ljca.type = stub->type;
+	spin_lock_init(&stub->event_cb_lock);
+	list_add_tail(&stub->list, &dev->stubs_list);
+	return stub;
+}
+
+static struct ljca_stub *ljca_stub_find(struct ljca_dev *dev, u8 type)
+{
+	struct ljca_stub *stub;
+
+	list_for_each_entry(stub, &dev->stubs_list, list) {
+		if (stub->type == type)
+			return stub;
+	}
+
+	dev_err(&dev->intf->dev, "USB stub not found, type:%d\n", type);
+
+	return ERR_PTR(-ENODEV);
+}
+
+static void ljca_stub_notify(struct ljca_stub *stub, u8 cmd, const void *evt_data, int len)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&stub->event_cb_lock, flags);
+	if (stub->event_entry.notify && stub->event_entry.context)
+		stub->event_entry.notify(stub->event_entry.context, cmd, evt_data, len);
+	spin_unlock_irqrestore(&stub->event_cb_lock, flags);
+}
+
+static int ljca_parse(struct ljca_dev *dev, struct ljca_msg *header)
+{
+	struct ljca_stub *stub;
+
+	stub = ljca_stub_find(dev, header->type);
+	if (IS_ERR(stub))
+		return PTR_ERR(stub);
+
+	if (!(header->flags & LJCA_ACK_FLAG)) {
+		ljca_stub_notify(stub, header->cmd, header->data, header->len);
+		return 0;
+	}
+
+	if (stub->cur_cmd != header->cmd) {
+		dev_err(&dev->intf->dev, "header and stub current command mismatch (%x vs %x)\n",
+			header->cmd, stub->cur_cmd);
+		return -EINVAL;
+	}
+
+	if (stub->ipacket.ibuf && stub->ipacket.ibuf_len) {
+		unsigned int newlen;
+
+		newlen = min_t(unsigned int, header->len, *stub->ipacket.ibuf_len);
+
+		*stub->ipacket.ibuf_len = newlen;
+		memcpy(stub->ipacket.ibuf, header->data, newlen);
+	}
+
+	stub->acked = true;
+	wake_up(&dev->ack_wq);
+
+	return 0;
+}
+
+static int ljca_stub_write(struct ljca_stub *stub, u8 cmd, const void *obuf, unsigned int obuf_len,
+			   void *ibuf, unsigned int *ibuf_len, bool wait_ack, unsigned long timeout)
+{
+	struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+	u8 flags = LJCA_CMPL_FLAG;
+	struct ljca_msg *header;
+	unsigned int msg_len = sizeof(*header) + obuf_len;
+	int actual;
+	int ret;
+
+	if (msg_len > LJCA_MAX_PACKET_SIZE)
+		return -EINVAL;
+
+	if (wait_ack)
+		flags |= LJCA_ACK_FLAG;
+
+	header = kmalloc(msg_len, GFP_KERNEL);
+	if (!header)
+		return -ENOMEM;
+
+	header->type = stub->type;
+	header->cmd = cmd;
+	header->flags = flags;
+	header->len = obuf_len;
+
+	if (obuf)
+		memcpy(header->data, obuf, obuf_len);
+
+	dev_dbg(&dev->intf->dev, "send: type:%d cmd:%d flags:%d len:%d\n", header->type,
+		header->cmd, header->flags, header->len);
+
+	usb_autopm_get_interface(dev->intf);
+	if (!dev->started) {
+		kfree(header);
+		ret = -ENODEV;
+		goto error_put;
+	}
+
+	mutex_lock(&dev->mutex);
+	stub->cur_cmd = cmd;
+	stub->ipacket.ibuf = ibuf;
+	stub->ipacket.ibuf_len = ibuf_len;
+	stub->acked = false;
+	ret = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->out_ep), header, msg_len,
+			   &actual, LJCA_USB_WRITE_TIMEOUT_MS);
+	kfree(header);
+	if (ret) {
+		dev_err(&dev->intf->dev, "bridge write failed ret:%d\n", ret);
+		goto error_unlock;
+	}
+
+	if (actual != msg_len) {
+		dev_err(&dev->intf->dev, "bridge write length mismatch (%d vs %d)\n", msg_len,
+			actual);
+		ret = -EINVAL;
+		goto error_unlock;
+	}
+
+	if (wait_ack) {
+		ret = wait_event_timeout(dev->ack_wq, stub->acked, msecs_to_jiffies(timeout));
+		if (!ret) {
+			dev_err(&dev->intf->dev, "acked wait timeout\n");
+			ret = -ETIMEDOUT;
+			goto error_unlock;
+		}
+	}
+
+	stub->ipacket.ibuf = NULL;
+	stub->ipacket.ibuf_len = NULL;
+	ret = 0;
+error_unlock:
+	mutex_unlock(&dev->mutex);
+error_put:
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int ljca_transfer_internal(struct ljca *ljca, u8 cmd, const void *obuf,
+				  unsigned int obuf_len, void *ibuf, unsigned int *ibuf_len,
+				  bool wait_ack)
+{
+	struct ljca_stub *stub;
+
+	stub = ljca_stub_find(ljca->dev, ljca->type);
+	if (IS_ERR(stub))
+		return PTR_ERR(stub);
+
+	return ljca_stub_write(stub, cmd, obuf, obuf_len, ibuf, ibuf_len, wait_ack,
+			       LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+}
+
+int ljca_transfer(struct ljca *ljca, u8 cmd, const void *obuf, unsigned int obuf_len, void *ibuf,
+		  unsigned int *ibuf_len)
+{
+	return ljca_transfer_internal(ljca, cmd, obuf, obuf_len, ibuf, ibuf_len, true);
+}
+EXPORT_SYMBOL_NS_GPL(ljca_transfer, LJCA);
+
+int ljca_transfer_noack(struct ljca *ljca, u8 cmd, const void *obuf, unsigned int obuf_len)
+{
+	return ljca_transfer_internal(ljca, cmd, obuf, obuf_len, NULL, NULL, false);
+}
+EXPORT_SYMBOL_NS_GPL(ljca_transfer_noack, LJCA);
+
+int ljca_register_event_cb(struct ljca *ljca, ljca_event_cb_t event_cb, void *context)
+{
+	struct ljca_stub *stub;
+	unsigned long flags;
+
+	stub = ljca_stub_find(ljca->dev, ljca->type);
+	if (IS_ERR(stub))
+		return PTR_ERR(stub);
+
+	spin_lock_irqsave(&stub->event_cb_lock, flags);
+	stub->event_entry.notify = event_cb;
+	stub->event_entry.context = context;
+	spin_unlock_irqrestore(&stub->event_cb_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(ljca_register_event_cb, LJCA);
+
+void ljca_unregister_event_cb(struct ljca *ljca)
+{
+	struct ljca_stub *stub;
+	unsigned long flags;
+
+	stub = ljca_stub_find(ljca->dev, ljca->type);
+	if (IS_ERR(stub))
+		return;
+
+	spin_lock_irqsave(&stub->event_cb_lock, flags);
+	stub->event_entry.notify = NULL;
+	stub->event_entry.context = NULL;
+	spin_unlock_irqrestore(&stub->event_cb_lock, flags);
+}
+EXPORT_SYMBOL_NS_GPL(ljca_unregister_event_cb, LJCA);
+
+static void ljca_stub_cleanup(struct ljca_dev *dev)
+{
+	struct ljca_stub *stub, *next;
+
+	list_for_each_entry_safe(stub, next, &dev->stubs_list, list) {
+		list_del_init(&stub->list);
+		kfree(stub);
+	}
+}
+
+static void ljca_read_complete(struct urb *urb)
+{
+	struct ljca_msg *header = urb->transfer_buffer;
+	struct ljca_dev *dev = urb->context;
+	int len = urb->actual_length;
+	int ret;
+
+	WARN_ON_ONCE(!dev);
+	WARN_ON_ONCE(!header);
+
+	if (urb->status) {
+		/* sync/async unlink faults aren't errors */
+		if (urb->status == -ENOENT || urb->status == -ECONNRESET ||
+		    urb->status == -ESHUTDOWN)
+			return;
+
+		dev_err(&dev->intf->dev, "read bulk urb transfer failed: %d\n", urb->status);
+		goto resubmit;
+	}
+
+	dev_dbg(&dev->intf->dev, "receive: type:%d cmd:%d flags:%d len:%d\n", header->type,
+		header->cmd, header->flags, header->len);
+
+	if (!ljca_validate(header, len)) {
+		dev_err(&dev->intf->dev, "data not correct header->len:%d payload_len:%d\n ",
+			header->len, len);
+		goto resubmit;
+	}
+
+	ret = ljca_parse(dev, header);
+	if (ret)
+		dev_err(&dev->intf->dev, "failed to parse data: ret:%d type:%d len:%d\n", ret,
+			header->type, header->len);
+
+resubmit:
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret)
+		dev_err(&dev->intf->dev, "failed submitting read urb, error %d\n", ret);
+}
+
+static int ljca_start(struct ljca_dev *dev)
+{
+	int ret;
+
+	usb_fill_bulk_urb(dev->in_urb, dev->udev, usb_rcvbulkpipe(dev->udev, dev->in_ep), dev->ibuf,
+			  dev->ibuf_len, ljca_read_complete, dev);
+
+	ret = usb_submit_urb(dev->in_urb, GFP_KERNEL);
+	if (ret) {
+		dev_err(&dev->intf->dev, "failed submitting read urb, error %d\n", ret);
+		return ret;
+	}
+
+	dev->started = true;
+
+	return 0;
+}
+
+struct ljca_mng_priv {
+	u32 reset_id;
+};
+
+static int ljca_mng_reset_handshake(struct ljca_stub *stub)
+{
+	struct ljca_mng_priv *priv;
+	__le32 reset_id;
+	__le32 reset_id_ret = 0;
+	unsigned int ilen = sizeof(__le32);
+	int ret;
+
+	priv = ljca_priv(stub);
+	reset_id = cpu_to_le32(priv->reset_id++);
+	ret = ljca_stub_write(stub, LJCA_MNG_RESET_NOTIFY, &reset_id, sizeof(reset_id),
+			      &reset_id_ret, &ilen, true, LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+	if (ret)
+		return ret;
+
+	if (ilen != sizeof(reset_id_ret) || reset_id_ret != reset_id) {
+		dev_err(&stub->intf->dev, "mng reset notify failed reset_id:%u/%u\n",
+			le32_to_cpu(reset_id_ret), le32_to_cpu(reset_id));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ljca_add_mfd_cell(struct ljca_dev *dev, struct mfd_cell *cell)
+{
+	struct mfd_cell *new_cells;
+
+	new_cells = krealloc_array(dev->cells, dev->cell_count + 1, sizeof(*new_cells), GFP_KERNEL);
+	if (!new_cells)
+		return -ENOMEM;
+
+	memcpy(&new_cells[dev->cell_count], cell, sizeof(*cell));
+	dev->cells = new_cells;
+	dev->cell_count++;
+
+	return 0;
+}
+
+static int ljca_gpio_stub_init(struct ljca_dev *dev, struct ljca_gpio_descriptor *desc)
+{
+	u32 valid_pin[LJCA_MAX_GPIO_NUM / BITS_PER_TYPE(u32)];
+	struct ljca_gpio_info *gpio_info;
+	struct mfd_cell cell = {};
+	struct ljca_stub *stub;
+	int gpio_num;
+	int i;
+
+	gpio_num = desc->pins_per_bank * desc->bank_num;
+	if (gpio_num > LJCA_MAX_GPIO_NUM)
+		return -EINVAL;
+
+	stub = ljca_stub_alloc(dev, LJCA_GPIO_STUB, sizeof(*gpio_info));
+	if (IS_ERR(stub))
+		return PTR_ERR(stub);
+
+	gpio_info = ljca_priv(stub);
+	gpio_info->ljca = &stub->ljca;
+	gpio_info->num = gpio_num;
+
+	for (i = 0; i < desc->bank_num; i++)
+		valid_pin[i] = desc->bank_desc[i].valid_pins;
+
+	bitmap_from_arr32(gpio_info->valid_pin_map, valid_pin, gpio_num);
+
+	cell.name = "ljca-gpio";
+	cell.platform_data = gpio_info;
+	cell.pdata_size = sizeof(*gpio_info);
+	cell.acpi_match = &ljca_acpi_match_gpio;
+
+	return ljca_add_mfd_cell(dev, &cell);
+}
+
+static int ljca_mng_enum_gpio(struct ljca_stub *stub)
+{
+	struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+	char buf[LJCA_MAX_PAYLOAD_SIZE];
+	struct ljca_gpio_descriptor *desc;
+	unsigned int len = LJCA_MAX_PAYLOAD_SIZE;
+	int ret;
+
+	ret = ljca_stub_write(stub, LJCA_MNG_ENUM_GPIO, NULL, 0, buf, &len, true,
+			      LJCA_USB_ENUM_STUB_TIMEOUT_MS);
+	if (ret)
+		return ret;
+
+	desc = (struct ljca_gpio_descriptor *)buf;
+	if (len != struct_size(desc, bank_desc, desc->bank_num)) {
+		dev_err(&stub->intf->dev, "GPIO enumeration failed, len:%u bank_num:%u\n", len,
+			desc->bank_num);
+		return -EINVAL;
+	}
+
+	return ljca_gpio_stub_init(dev, desc);
+}
+
+static int ljca_i2c_stub_init(struct ljca_dev *dev, struct ljca_i2c_descriptor *desc)
+{
+	struct ljca_i2c_info *i2c_info;
+	struct ljca_stub *stub;
+	int ret;
+	int i;
+
+	stub = ljca_stub_alloc(dev, LJCA_I2C_STUB, size_mul(desc->num, sizeof(*i2c_info)));
+	if (IS_ERR(stub))
+		return PTR_ERR(stub);
+
+	i2c_info = ljca_priv(stub);
+
+	for (i = 0; i < desc->num; i++) {
+		struct mfd_cell cell = {};
+
+		i2c_info[i].ljca = &stub->ljca;
+		i2c_info[i].id = desc->info[i].id;
+		i2c_info[i].capacity = desc->info[i].capacity;
+		i2c_info[i].intr_pin = desc->info[i].intr_pin;
+
+		cell.name = "ljca-i2c";
+		cell.platform_data = &i2c_info[i];
+		cell.pdata_size = sizeof(i2c_info[i]);
+
+		if (i < ARRAY_SIZE(ljca_acpi_match_i2cs))
+			cell.acpi_match = &ljca_acpi_match_i2cs[i];
+
+		ret = ljca_add_mfd_cell(dev, &cell);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ljca_mng_enum_i2c(struct ljca_stub *stub)
+{
+	struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+	char buf[LJCA_MAX_PAYLOAD_SIZE];
+	struct ljca_i2c_descriptor *desc;
+	unsigned int len = LJCA_MAX_PAYLOAD_SIZE;
+	int ret;
+
+	ret = ljca_stub_write(stub, LJCA_MNG_ENUM_I2C, NULL, 0, buf, &len, true,
+			      LJCA_USB_ENUM_STUB_TIMEOUT_MS);
+	if (ret) {
+		dev_err(&stub->intf->dev, "I2C enumeration failed, ret:%d len:%u\n", ret, len);
+		return ret;
+	}
+
+	desc = (struct ljca_i2c_descriptor *)buf;
+	return ljca_i2c_stub_init(dev, desc);
+}
+
+static int ljca_spi_stub_init(struct ljca_dev *dev, struct ljca_spi_descriptor *desc)
+{
+	struct ljca_spi_info *spi_info;
+	struct ljca_stub *stub;
+	int i;
+	int ret;
+
+	stub = ljca_stub_alloc(dev, LJCA_SPI_STUB, size_mul(desc->num, sizeof(*spi_info)));
+	if (IS_ERR(stub))
+		return PTR_ERR(stub);
+
+	spi_info = ljca_priv(stub);
+	for (i = 0; i < desc->num; i++) {
+		struct mfd_cell cell = {};
+
+		spi_info[i].ljca = &stub->ljca;
+		spi_info[i].id = desc->info[i].id;
+		spi_info[i].capacity = desc->info[i].capacity;
+
+		cell.name = "ljca-spi";
+		cell.platform_data = &spi_info[i];
+		cell.pdata_size = sizeof(spi_info[i]);
+		if (i < ARRAY_SIZE(ljca_acpi_match_spis))
+			cell.acpi_match = &ljca_acpi_match_spis[i];
+
+		ret = ljca_add_mfd_cell(dev, &cell);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ljca_mng_enum_spi(struct ljca_stub *stub)
+{
+	struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+	char buf[LJCA_MAX_PAYLOAD_SIZE];
+	struct ljca_spi_descriptor *desc;
+	unsigned int len = LJCA_MAX_PAYLOAD_SIZE;
+	int ret;
+
+	ret = ljca_stub_write(stub, LJCA_MNG_ENUM_SPI, NULL, 0, buf, &len, true,
+			      LJCA_USB_ENUM_STUB_TIMEOUT_MS);
+	if (ret) {
+		dev_err(&stub->intf->dev, "SPI enumeration failed, ret:%d len:%d\n", ret, len);
+		return ret;
+	}
+
+	desc = (struct ljca_spi_descriptor *)buf;
+	return ljca_spi_stub_init(dev, desc);
+}
+
+static int ljca_mng_get_version(struct ljca_stub *stub, char *buf)
+{
+	struct fw_version version = {};
+	unsigned int len = sizeof(version);
+	int ret;
+
+	ret = ljca_stub_write(stub, LJCA_MNG_GET_VERSION, NULL, 0, &version, &len, true,
+			      LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+	if (ret)
+		return ret;
+
+	if (len != sizeof(version)) {
+		dev_err(&stub->intf->dev, "get version failed, len:%d\n", len);
+		return -EINVAL;
+	}
+
+	return sysfs_emit(buf, "%d.%d.%d.%d\n", version.major, version.minor,
+			  le16_to_cpu(version.patch), le16_to_cpu(version.build));
+}
+
+static inline int ljca_mng_set_dfu_mode(struct ljca_stub *stub)
+{
+	return ljca_stub_write(stub, LJCA_MNG_SET_DFU_MODE, NULL, 0, NULL, NULL, true,
+			       LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+}
+
+static int ljca_mng_link(struct ljca_dev *dev, struct ljca_stub *stub)
+{
+	int ret;
+
+	ret = ljca_mng_reset_handshake(stub);
+	if (ret)
+		return ret;
+
+	/* try to enum all the stubs */
+	ljca_mng_enum_gpio(stub);
+	ljca_mng_enum_i2c(stub);
+	ljca_mng_enum_spi(stub);
+
+	return 0;
+}
+
+static int ljca_mng_init(struct ljca_dev *dev)
+{
+	struct ljca_stub *stub;
+	struct ljca_mng_priv *priv;
+	int ret;
+
+	stub = ljca_stub_alloc(dev, LJCA_MNG_STUB, sizeof(*priv));
+	if (IS_ERR(stub))
+		return PTR_ERR(stub);
+
+	priv = ljca_priv(stub);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->reset_id = 0;
+
+	ret = ljca_mng_link(dev, stub);
+	if (ret)
+		dev_err(&dev->intf->dev, "mng stub link failed, ret:%d\n", ret);
+
+	return ret;
+}
+
+static inline int ljca_diag_set_trace_level(struct ljca_stub *stub, u8 level)
+{
+	return ljca_stub_write(stub, LJCA_DIAG_SET_TRACE_LEVEL, &level, sizeof(level), NULL, NULL,
+			       true, LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+}
+
+static int ljca_diag_init(struct ljca_dev *dev)
+{
+	struct ljca_stub *stub;
+
+	stub = ljca_stub_alloc(dev, LJCA_DIAG_STUB, 0);
+
+	return PTR_ERR_OR_ZERO(stub);
+}
+
+static void ljca_delete(struct ljca_dev *dev)
+{
+	mutex_destroy(&dev->mutex);
+	usb_free_urb(dev->in_urb);
+	usb_put_intf(dev->intf);
+	usb_put_dev(dev->udev);
+	kfree(dev->ibuf);
+	kfree(dev->cells);
+	kfree(dev);
+}
+
+static int ljca_init(struct ljca_dev *dev)
+{
+	mutex_init(&dev->mutex);
+	init_waitqueue_head(&dev->ack_wq);
+	INIT_LIST_HEAD(&dev->stubs_list);
+
+	return 0;
+}
+
+static void ljca_stop(struct ljca_dev *dev)
+{
+	dev->started = false;
+	usb_kill_urb(dev->in_urb);
+}
+
+static ssize_t ljca_enable_dfu_store(struct device *dev, struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct ljca_dev *ljca_dev = usb_get_intfdata(intf);
+	struct ljca_stub *mng_stub = ljca_stub_find(ljca_dev, LJCA_MNG_STUB);
+	bool enable;
+	int ret;
+
+	ret = kstrtobool(buf, &enable);
+	if (ret)
+		return ret;
+
+	if (enable) {
+		ret = ljca_mng_set_dfu_mode(mng_stub);
+		if (ret)
+			return ret;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(ljca_enable_dfu);
+
+static ssize_t ljca_trace_level_store(struct device *dev, struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct ljca_dev *ljca_dev = usb_get_intfdata(intf);
+	struct ljca_stub *diag_stub = ljca_stub_find(ljca_dev, LJCA_DIAG_STUB);
+	u8 level;
+	int ret;
+
+	if (kstrtou8(buf, 0, &level))
+		return -EINVAL;
+
+	ret = ljca_diag_set_trace_level(diag_stub, level);
+	if (ret)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(ljca_trace_level);
+
+static ssize_t ljca_version_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct ljca_dev *ljca_dev = usb_get_intfdata(intf);
+	struct ljca_stub *stub = ljca_stub_find(ljca_dev, LJCA_MNG_STUB);
+
+	return ljca_mng_get_version(stub, buf);
+}
+static DEVICE_ATTR_RO(ljca_version);
+
+static struct attribute *ljca_attrs[] = {
+	&dev_attr_ljca_version.attr,
+	&dev_attr_ljca_enable_dfu.attr,
+	&dev_attr_ljca_trace_level.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(ljca);
+
+static int ljca_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct ljca_dev *dev;
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+	int ret;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	ljca_init(dev);
+	dev->udev = usb_get_dev(interface_to_usbdev(intf));
+	dev->intf = usb_get_intf(intf);
+
+	/* set up the endpoint information use only the first bulk-in and bulk-out endpoints */
+	ret = usb_find_common_endpoints(intf->cur_altsetting, &bulk_in, &bulk_out, NULL, NULL);
+	if (ret) {
+		dev_err(&intf->dev, "could not find both bulk-in and bulk-out endpoints\n");
+		goto error;
+	}
+
+	dev->ibuf_len = usb_endpoint_maxp(bulk_in);
+	dev->in_ep = bulk_in->bEndpointAddress;
+	dev->ibuf = kzalloc(dev->ibuf_len, GFP_KERNEL);
+	if (!dev->ibuf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	dev->in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->in_urb) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	dev->out_ep = bulk_out->bEndpointAddress;
+	/* save our data pointer in this intf device */
+	usb_set_intfdata(intf, dev);
+	ret = ljca_start(dev);
+	if (ret) {
+		dev_err(&intf->dev, "bridge read start failed ret %d\n", ret);
+		goto error;
+	}
+
+	ret = ljca_mng_init(dev);
+	if (ret) {
+		dev_err(&intf->dev, "register mng stub failed ret %d\n", ret);
+		goto error_stop;
+	}
+
+	ret = ljca_diag_init(dev);
+	if (ret) {
+		dev_err(&intf->dev, "register diag stub failed ret %d\n", ret);
+		goto error_stop;
+	}
+
+	ret = mfd_add_hotplug_devices(&intf->dev, dev->cells, dev->cell_count);
+	if (ret) {
+		dev_err(&intf->dev, "failed to add mfd devices\n");
+		goto error_stop;
+	}
+
+	usb_enable_autosuspend(dev->udev);
+	return 0;
+error_stop:
+	ljca_stop(dev);
+error:
+	dev_err(&intf->dev, "LJCA USB device init failed\n");
+	/* this frees allocated memory */
+	ljca_stub_cleanup(dev);
+	ljca_delete(dev);
+
+	return ret;
+}
+
+static void ljca_disconnect(struct usb_interface *intf)
+{
+	struct ljca_dev *dev = usb_get_intfdata(intf);
+
+	ljca_stop(dev);
+	mfd_remove_devices(&intf->dev);
+	ljca_stub_cleanup(dev);
+	ljca_delete(dev);
+}
+
+static int ljca_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct ljca_dev *dev = usb_get_intfdata(intf);
+
+	ljca_stop(dev);
+	return 0;
+}
+
+static int ljca_resume(struct usb_interface *intf)
+{
+	struct ljca_dev *dev = usb_get_intfdata(intf);
+
+	return ljca_start(dev);
+}
+
+static const struct usb_device_id ljca_table[] = {
+	{USB_DEVICE(0x8086, 0x0b63)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, ljca_table);
+
+static struct usb_driver ljca_driver = {
+	.name = "ljca",
+	.probe = ljca_probe,
+	.disconnect = ljca_disconnect,
+	.suspend = ljca_suspend,
+	.resume = ljca_resume,
+	.id_table = ljca_table,
+	.dev_groups = ljca_groups,
+	.supports_autosuspend = 1,
+};
+module_usb_driver(ljca_driver);
+
+MODULE_AUTHOR("Ye Xiang <xiang.ye@intel.com>");
+MODULE_AUTHOR("Wang Zhifeng <zhifeng.wang@intel.com>");
+MODULE_AUTHOR("Zhang Lixu <lixu.zhang@intel.com>");
+MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/ljca.h b/include/linux/usb/ljca.h
new file mode 100644
index 000000000000..9ae3ea242294
--- /dev/null
+++ b/include/linux/usb/ljca.h
@@ -0,0 +1,95 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _LINUX_USB_LJCA_H_
+#define _LINUX_USB_LJCA_H_
+
+#include <linux/types.h>
+
+struct ljca;
+
+#define LJCA_MAX_GPIO_NUM 64
+struct ljca_gpio_info {
+	struct ljca *ljca;
+	unsigned int num;
+	DECLARE_BITMAP(valid_pin_map, LJCA_MAX_GPIO_NUM);
+};
+
+struct ljca_i2c_info {
+	struct ljca *ljca;
+	u8 id;
+	u8 capacity;
+	u8 intr_pin;
+};
+
+struct ljca_spi_info {
+	struct ljca *ljca;
+	u8 id;
+	u8 capacity;
+};
+
+/**
+ * typedef ljca_event_cb_t - event callback function signature
+ *
+ * @context: the execution context of who registered this callback
+ * @cmd: the command from device for this event
+ * @evt_data: the event data payload
+ * @len: the event data payload length
+ *
+ * The callback function is called in interrupt context and the data payload is
+ * only valid during the call. If the user needs later access of the data, it
+ * must copy it.
+ */
+typedef void (*ljca_event_cb_t)(void *context, u8 cmd, const void *evt_data, int len);
+
+/**
+ * ljca_register_event_cb - register a callback function to receive events
+ *
+ * @ljca: ljca device handle
+ * @event_cb: callback function
+ * @context: execution context of event callback
+ *
+ * Return: 0 in case of success, negative value in case of error
+ */
+int ljca_register_event_cb(struct ljca *ljca, ljca_event_cb_t event_cb, void *context);
+
+/**
+ * ljca_unregister_event_cb - unregister the callback function for an event
+ *
+ * @ljca: ljca device handle
+ */
+void ljca_unregister_event_cb(struct ljca *ljca);
+
+/**
+ * ljca_transfer - issue a LJCA command and wait for a response and the
+ * associated data
+ *
+ * @ljca: ljca device handle
+ * @cmd: the command to be sent to the device
+ * @obuf: the buffer to be sent to the device; it can be NULL if the user
+ *	doesn't need to transmit data with this command
+ * @obuf_len: the size of the buffer to be sent to the device; it should
+ *	be 0 when obuf is NULL
+ * @ibuf: any data associated with the response will be copied here; it can be
+ *	NULL if the user doesn't need the response data
+ * @ibuf_len: must be initialized to the input buffer size; it will be modified
+ *	to indicate the actual data transferred; it shouldn't be NULL as well
+ *	when ibuf isn't NULL
+ *
+ * Return: 0 for success, negative value for errors
+ */
+int ljca_transfer(struct ljca *ljca, u8 cmd, const void *obuf, unsigned int obuf_len,
+		  void *ibuf, unsigned int *ibuf_len);
+
+/**
+ * ljca_transfer_noack - issue a LJCA command without a response
+ *
+ * @ljca: ljca device handle
+ * @cmd: the command to be sent to the device
+ * @obuf: the buffer to be sent to the device; it can be NULL if the user
+ *	doesn't need to transmit data with this command
+ * @obuf_len: the size of the buffer to be sent to the device
+ *
+ * Return: 0 for success, negative value for errors
+ */
+int ljca_transfer_noack(struct ljca *ljca, u8 cmd, const void *obuf, unsigned int obuf_len);
+
+#endif