diff mbox series

[v2,15/15] arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes

Message ID 20230320154841.327908-16-brgl@bgdev.pl
State New
Headers show
Series [v2,01/15] arm64: dts: qcom: sa8775p: pad reg properties to 8 digits | expand

Commit Message

Bartosz Golaszewski March 20, 2023, 3:48 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add GPIO controller nodes to PMICs that have the GPIO hooked up on
sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index 276070b62ccd..574c20caf9eb 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -78,6 +78,16 @@  pmm8654au_0_pon_resin: resin {
 				status = "disabled";
 			};
 		};
+
+		pmm8654au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmm8654au_1: pmic@2 {
@@ -99,6 +109,16 @@  pmm8654au_2: pmic@4 {
 		reg = <0x4 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pmm8654au_2_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmm8654au_3: pmic@6 {