From patchwork Tue Apr 25 15:21:33 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 677018 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 600F4C6FD18 for ; Tue, 25 Apr 2023 15:26:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234506AbjDYP0T (ORCPT ); Tue, 25 Apr 2023 11:26:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47804 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234486AbjDYP0S (ORCPT ); Tue, 25 Apr 2023 11:26:18 -0400 Received: from APC01-PSA-obe.outbound.protection.outlook.com (mail-psaapc01on2123.outbound.protection.outlook.com [40.107.255.123]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 105CDD317; Tue, 25 Apr 2023 08:26:15 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=E15AqRVcGGMZmMxCmmXvNOfkgz69qTSZN6TTClBqmL03xw6CuPBGehPLyYyNJfuEPsq/OCMs8wDpTdRnzTk04rByBZFh2qDGf3VOalN3gZvjvPXJo9zZ6iWsNryDUZVwdrQMlcTSzGZwIayjXVM5d4L5TTol7QYFlvGhdLDoSatvg6QDk7oAkTkrH96Uju6WsREKW4WrOZ7wg1cLosTT2WTjpOCQgXJsDnpaYlI6CACkUgcqfvgkmgCp3DlR/VR6WnLlK2RhGV9xKhQj5tQ6OWDd16bJSVjNAy3jdeCT2ptLibt/0Cnca8Xp/aZS1zoSygPfGPxxLrEIE2BUe/kI7w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=QvB3+hhR9xT/iN0PXkq+44lBZKT8Hctq9+6OMrT1yhA=; b=ipv+pzGPU23+qges3RGuyBqspMIrZuSYHY/GS8dpyMOSFUTI5AX7ddciCS4d6PO7iglWr/iT5NWP9gn39TkcY8gHvG0TB/D5Hx8L32VdEdUIGPMn7ywYDUZ8sWT77K+jBDqeZYev2Enu6GQCrVwkleTQ1G2Zwbmz0e9NnzcWjvy5DRXuD9LAiO2Re5NMrDP/nbsvujviUoyDQghTwjfKMxEwLsdSjBymeQe2U/AJzdFW3WT9fc1Oy1NZDUbor8QHg3EXHvDl1UxqKZkxsgXpPwO71xXkBQ7ATASSv7uc0KyxUqNHktKHv2LfgQa7toGnC2EC6s7DcW3uYTjMaazYMA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) by SG2PR06MB5154.apcprd06.prod.outlook.com (2603:1096:4:1cd::11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6319.29; Tue, 25 Apr 2023 15:26:11 +0000 Received: from SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::71f2:cae4:d8b8:8ea4]) by SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::71f2:cae4:d8b8:8ea4%3]) with mapi id 15.20.6319.033; Tue, 25 Apr 2023 15:26:11 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, michael.wang@yunjingtech.com, "larry.lai" , Javier Arteaga , Nicola Lunghi Subject: [RFC RESEND 1/3] mfd: Add support for UP board CPLD/FPGA Date: Tue, 25 Apr 2023 23:21:33 +0800 Message-Id: <20230425152135.30745-2-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230425152135.30745-1-larry.lai@yunjingtech.com> References: <20230425152135.30745-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYCP286CA0342.JPNP286.PROD.OUTLOOK.COM (2603:1096:400:38e::8) To SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SG2PR06MB3742:EE_|SG2PR06MB5154:EE_ X-MS-Office365-Filtering-Correlation-Id: 7006c034-836c-47dd-084e-08db45a1669a X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SG2PR06MB3742.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230028)(366004)(346002)(136003)(376002)(39830400003)(396003)(451199021)(2616005)(7416002)(83380400001)(30864003)(2906002)(5660300002)(38350700002)(8676002)(186003)(1076003)(26005)(6506007)(6512007)(8936002)(38100700002)(41300700001)(66946007)(86362001)(6486002)(36756003)(52116002)(6666004)(478600001)(54906003)(4326008)(66556008)(66476007)(316002); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 8hBF4SugzvEntscHtAG7dQpgr8o0KGbV2OGgvLXw+kMCNDyXu7gFoRUGcT9eB4pBKwogM+82r2jUJgxY+2GA4vxuLGcB0GmUPzAYtIwQFFg54el2ZepkCyEEbQxm6eSGgWC9crMcxAm4NPawG8QVUvHHeryT1nXclFj5x+p/bsvydX1WAYF8ByyZ+aYP6PhmpWUrpe865Sj5Z9/jcwpKob6BJaO8rnrazgseylJDHh2f5EimR06ix9MaI7NRjD+mV8dnohphwqSQ3HNdag/LMl4lv6GqD6/L8T2tCmTaUAKa0a/rRioHKq4odP+y9w5T0zWhAe4JzLmxThSlyh8uFjuA4quI4XeTyYL2ZzPyuBj3I2kZUgUdqtGb3bxn6td+Q3Ad1M7TEA0tyXJHyumbZeO/Vp49kQ97vDKPWHQUCJYXaCDjgqo5IF9VFbHtV/VK//Os4dGec8G5Bt2UgRITGD87NmuET5xxAu5Gk97TCrkBU+glYYGGeYtb3K212d9JyDy3e+Z9GBuOgr2A/eplwfzfuA5DIdU1qpXIbikuvFucV8aMT2KxfNYbrhjr7SHl9loa3iIHonjelwF3ViJrV1LOlgQU+cWtlFJ0jcEFyj/s8GEmr38yDgjwgWjvdgCNuVAVpnYrDXcJnd+cDzmHjcImCzAy1cfpBgmu/67gDM1Mn/Jog/Doa56QCckWhseEvW2gzYLYFhSPjJSSip/kAl0Xf5ovbfcZWi4zMEA53OHVxJLQhLOTl0FxTOBrA2GQLA64c1xOHMlvEL9UyL9e2HkSZUhdf0RNOEjBiFc1TCEd+gRuTMdoTcZrdhdsxfWqH8cj2++9C8Jd8MA+y1ISn8KnkVW7o1k6Eg/VSnQFqvAxgtaM9UVsFEK1x1s1gEvWP31ohDY5PGeN6T/qfs9h3A2CunuF9omy8Fi1FYIupMHVEK5MMvVPY+Co4VwT6OkZpDBdeKYm+m8NLmM5v3WvrFwLOQX9IDh5ZKaN393D5YVVoTm2FE/BJUlMua/R35Zt5DSGc/h+Vhr5lIwtevlfqUnq+1YQvRRtpxXTt9Cbd80FfSuG4hmVtVGufFSeSJglZ7ZFcx5vVwQ0WaNQ+fH3IceUfKWR/p3lXgxWKKSNelHrdj+yCJVhcW6JTbbn0e2ecS66Eyg9icbMZzSFUhDWjcR025Z7VOSRW4hHxmBbM0FSeC3ENu6Gr9gj1/yuSzeCkmJVOl3+CNI8Wyz/a7tNfdcsq8XD6rq7T0AEp2zQo7TW+FJHc97vVm2dt6VQ9f/3K/pkFJixmSzktg9MA2iD3MFgJWE9ZebNMCFLSZWpMQm1eGszI7VUsZfzLozEYbM145mbNVZu/zIGQWdd81z8bXUj85rI6QTfwY1MtaVZGvSqrGMt3O3eAjefu+LT9ZYUkvsz+z/leXPuUSM9ta9UatohRzz5ZVG74s0Q8k0GUItGvwV0Hu3gOv9pgP3vzoigJXxfYdoxexDWye8HopcLPkL3vCT3Di1FNmQsBroTBmMTtXrajWd87xE/FEPHCqybqPw32iWtlx6/CSV5yXEmffB4a+toVDrKV0yYc6cDD4YF3jwC22z4BnAnxzFmhvz/2YvJlfyZr4OyFh92VpV14A== X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: 7006c034-836c-47dd-084e-08db45a1669a X-MS-Exchange-CrossTenant-AuthSource: SG2PR06MB3742.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 25 Apr 2023 15:26:11.8399 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: PIQXqLSNFJH4vwQJgoNc6bWUzgiuRqzcz7NWhqKut4LPyblFejuphknmgYmjHpCs2zyHITgtBxlZEfkHWPNp4XsV6vo7qaALLbU9kFUYhOA= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SG2PR06MB5154 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org The UP Squared board implements certain features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA. This mfd driver implements the line protocol to read and write registers from the FPGA through regmap. The register address map is also included. The UP Boards provide a few I/O pin headers (for both GPIO and functions), including a 40-pin Raspberry Pi compatible header. This patch implements support for the FPGA-based pin controller that manages direction and enable state for those header pins. Partial support UP boards: * UP core + CREX * UP core + CRST02 Signed-off-by: Javier Arteaga [merge various fixes] Signed-off-by: Nicola Lunghi Reviewed-by: Lee Jones Reviewed-by: Andy Shevchenko Signed-off-by: larry.lai --- RFC 2022/11/23 -> RFC 2023/04/25 (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V3 -> RFC 2022/11/23: (1) Refer 2022/11/16 Lee Jones review, cleaned up coding style and addressed review comments. (2) Description on the UP Boards FPGA register read/write protocols PATCH V2 -> V3: (1) fixed kernel test robot compiler warning PATCH V1 -> V2: (1) Synchronizing upboard github to rc2 (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues. --- --- drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/upboard-fpga.c | 527 +++++++++++++++++++++++++++++++ include/linux/mfd/upboard-fpga.h | 61 ++++ 4 files changed, 601 insertions(+) create mode 100644 drivers/mfd/upboard-fpga.c create mode 100644 include/linux/mfd/upboard-fpga.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index abb58ab1a1a4..1041e937fc7a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2104,6 +2104,18 @@ config MFD_QCOM_PM8008 under it in the device tree. Additional drivers must be enabled in order to use the functionality of the device. +config MFD_INTEL_UPBOARD_FPGA + tristate "Support for the Intel platform foundation kit UP board FPGA" + select MFD_CORE + depends on X86 && ACPI + help + Select this option to enable the Intel AAEON UP and UP^2 on-board FPGA. + This is core driver for the UP board that implements certain (pin + control, onboard LEDs or CEC) through an on-board FPGA. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 858cacf659d6..8374a05f6f43 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -250,6 +250,7 @@ obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o +obj-$(CONFIG_MFD_INTEL_UPBOARD_FPGA) += upboard-fpga.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o diff --git a/drivers/mfd/upboard-fpga.c b/drivers/mfd/upboard-fpga.c new file mode 100644 index 000000000000..85fd0f858781 --- /dev/null +++ b/drivers/mfd/upboard-fpga.c @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board multi function device driver for control CPLD/FPGA to + * provide more GPIO driving power also provide CPLD LEDs and pin mux function + * recognize HID AANT0F00 ~ AAANT0F04 in ACPI name space + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct upboard_fpga_data { + const struct regmap_config *cpld_config; + const struct mfd_cell *cells; + size_t ncells; +}; + +#define AAEON_MANUFACTURER_ID 0x01 +#define SUPPORTED_FW_MAJOR 0x0 +#define MENUFACTURER_ID_MASK GENMASK(7, 0) + +#define FIRMWARE_ID_BUILD_OFFSET (12) +#define FIRMWARE_ID_MAJOR_OFFSET (8) +#define FIRMWARE_ID_MINOR_OFFSET (4) +#define FIRMWARE_ID_PATCH_OFFSET (0) +#define FIRMWARE_ID_MASK GENMASK(3, 0) + +/* + * For UP Board Series FPGA register read/write protocols + * EMUTEX specs: + * D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 .... D22 D23 + * [RW][ address ][ DATA ] + * + * Read Sequence: + * ___ ____________________________________________________ _________ + * clr: \_/ <--low-pulse does start the write-readback \_/<--start + * sequence with partital reset of internal new sequence + * registers but the CONF-REG. + * ____________________________________________________________________ + * rst: _/ _ _ _ _ _ _ __ __ __ _ + * stb: STB#1->_/1\_/2\_/3\_...._/7\_/8\_/9\_/10\_..../23\_/24\_/<-STB#25 edge + * is needed + * to ACK + * (D0 - D7 stb rising latch) + * data_in: D0 D1 D2 .... D6 D7 don't ........ care(DC) + * data_out: don't ...........care(DC) D8 D9 .... D22 D23 + * (D8 - D23 stb falling latch) + * flag_Read: _________...._________ + * __DC_ ____________...._________/ \_ + * counter: + * [00]DC[00][01][02] ............[08][9][10]............[24][00] + * CONF-REG: + * [00] [ CONF-REG ] + * wreg: + * [00]DC[00][ wreg=SHFT(wreg) ][ADR][DATA][wreg=SHFT(wreg)] + * wreg2: + * [ (COPY)=ADDR ] + */ +static int upboard_fpga_read(void *context, unsigned int reg, unsigned int *val) +{ + struct upboard_fpga * const fpga = context; + int i; + + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + reg |= UPFPGA_READ_FLAG; + + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + *val = 0; + + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + *val |= gpiod_get_value(fpga->dataout_gpio) << i; + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +/* + * Write Sequence: + * ___ ____________________________________________________ _________ + * clr: \_/ <--low-pulse does start the write-readback \_/<--start + * sequence with partital reset of internal new sequence + * registers but the CONF-REG. + * ____________________________________________________________________ + * rst: _/ _ _ _ _ _ _ __ __ __ _ + * stb: STB#1->_/1\_/2\_/3\_...._/7\_/8\_/9\_/10\_..../23\_/24\_/<-STB#25 edge + * is needed + * to ACK + * (D0 - D23 stb rising latch) + * data_in: D0 D1 D2 .... D6 D7 D8 D9 .... D22 D23 + * data_out: don't ................................care (DC) + * flag_Read: + * __DC_ ____________....__________________________________ + * counter: + * [00]DC[00][01][02] ............[08][9][10]............[24][00] + * wreg: + * [00]DC[00][wreg=SHFT(wreg)&dat_in ][SHFT(wreg)&dat_in][DAT] + * wreg2: + * [ (COPY)=ADDR ] + * CONF-REG: + * [00] [ CONF-REG = OLD VALUE ][CONF-REG=DAT] + */ +static int upboard_fpga_write(void *context, unsigned int reg, unsigned int val) +{ + struct upboard_fpga * const fpga = context; + int i; + + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->datain_gpio, !!(val & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static const struct regmap_range upboard_up_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_range upboard_up_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_access_table upboard_up_readable_table = { + .yes_ranges = upboard_up_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_readable_ranges), +}; + +static const struct regmap_access_table upboard_up_writable_table = { + .yes_ranges = upboard_up_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_writable_ranges), +}; + +static const struct regmap_config upboard_up_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_RBTREE, + .rd_table = &upboard_up_readable_table, + .wr_table = &upboard_up_writable_table, +}; + +static struct upboard_led_data upboard_up_led_data[] = { + { .bit = 0, .colour = "yellow" }, + { .bit = 1, .colour = "green" }, + { .bit = 2, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up_mfd_cells[] = { + { .name = "upboard-pinctrl" }, + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[0], + sizeof(*upboard_up_led_data), 0), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[1], + sizeof(*upboard_up_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[2], + sizeof(*upboard_up_led_data), 2), +}; + +/* UP Squared 6000 EHL board */ + +static const struct upboard_fpga_data upboard_up_fpga_data = { + .cpld_config = &upboard_up_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static const struct mfd_cell upboard_pinctrl_cells[] = { + { .name = "upboard-pinctrl" }, +}; + +static const struct upboard_fpga_data upboard_pinctrl_data = { + .cpld_config = &upboard_up_regmap_config, + .cells = upboard_pinctrl_cells, + .ncells = ARRAY_SIZE(upboard_pinctrl_cells), +}; + +/* UP^2 board */ +static const struct regmap_range upboard_up2_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_range upboard_up2_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_access_table upboard_up2_readable_table = { + .yes_ranges = upboard_up2_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_readable_ranges), +}; + +static const struct regmap_access_table upboard_up2_writable_table = { + .yes_ranges = upboard_up2_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_writable_ranges), +}; + +static const struct regmap_config upboard_up2_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up2_readable_table, + .wr_table = &upboard_up2_writable_table, +}; + +static struct upboard_led_data upboard_up2_led_data[] = { + { .bit = 0, .colour = "blue" }, + { .bit = 1, .colour = "yellow" }, + { .bit = 2, .colour = "green" }, + { .bit = 3, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up2_mfd_cells[] = { + { .name = "upboard-pinctrl" }, + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[0], + sizeof(*upboard_up2_led_data), 0), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[1], + sizeof(*upboard_up2_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[2], + sizeof(*upboard_up2_led_data), 2), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[3], + sizeof(*upboard_up2_led_data), 3), +}; + +static const struct upboard_fpga_data upboard_up2_fpga_data = { + .cpld_config = &upboard_up2_regmap_config, + .cells = upboard_up2_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up2_mfd_cells), +}; + +/* UP-CRST02 carrier board for UP Core */ + +/* same MAX10 config as UP2, but same LED cells as UP1 */ +static const struct upboard_fpga_data upboard_upcore_crst02_fpga_data = { + .cpld_config = &upboard_up2_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static int __init upboard_fpga_gpio_init(struct upboard_fpga *fpga) +{ + enum gpiod_flags flags = fpga->uninitialised ? GPIOD_OUT_LOW : GPIOD_ASIS; + + fpga->enable_gpio = devm_gpiod_get(fpga->dev, "enable", flags); + if (IS_ERR(fpga->enable_gpio)) + return PTR_ERR(fpga->enable_gpio); + + fpga->clear_gpio = devm_gpiod_get(fpga->dev, "clear", GPIOD_OUT_LOW); + if (IS_ERR(fpga->clear_gpio)) + return PTR_ERR(fpga->clear_gpio); + + fpga->strobe_gpio = devm_gpiod_get(fpga->dev, "strobe", GPIOD_OUT_LOW); + if (IS_ERR(fpga->strobe_gpio)) + return PTR_ERR(fpga->strobe_gpio); + + fpga->datain_gpio = devm_gpiod_get(fpga->dev, "datain", GPIOD_OUT_LOW); + if (IS_ERR(fpga->datain_gpio)) + return PTR_ERR(fpga->datain_gpio); + + fpga->dataout_gpio = devm_gpiod_get(fpga->dev, "dataout", GPIOD_IN); + if (IS_ERR(fpga->dataout_gpio)) + return PTR_ERR(fpga->dataout_gpio); + + /* + * The SoC pinctrl driver may not support reserving the GPIO line for + * FPGA reset without causing an undesired reset pulse. This will clear + * any settings on the FPGA, so only do it if we must. + * Reset GPIO defaults HIGH, get GPIO and set to LOW, then set back to + * HIGH as a pulse. + */ + if (fpga->uninitialised) { + fpga->reset_gpio = devm_gpiod_get(fpga->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(fpga->reset_gpio)) + return PTR_ERR(fpga->reset_gpio); + + gpiod_set_value(fpga->reset_gpio, 1); + } + + gpiod_set_value(fpga->enable_gpio, 1); + fpga->uninitialised = false; + + return 0; +} + +/* + * This function is for debugging with user for showing firmware information. + */ +static int __init upboard_fpga_show_firmware_info(struct upboard_fpga *fpga) +{ + unsigned int platform_id, manufacturer_id; + unsigned int firmware_id, build, major, minor, patch; + int ret; + + if (!fpga) + return -ENOMEM; + + ret = regmap_read(fpga->regmap, UPFPGA_REG_PLATFORM_ID, &platform_id); + if (ret) + return ret; + + manufacturer_id = platform_id & MENUFACTURER_ID_MASK; + if (manufacturer_id != AAEON_MANUFACTURER_ID) { + dev_err(fpga->dev, + "driver not compatible with custom FPGA FW from manufacturer id 0x%02x. Exiting", + manufacturer_id); + + return -ENODEV; + } + + ret = regmap_read(fpga->regmap, UPFPGA_REG_FIRMWARE_ID, &firmware_id); + if (ret) + return ret; + + build = (firmware_id >> FIRMWARE_ID_BUILD_OFFSET) & FIRMWARE_ID_MASK; + major = (firmware_id >> FIRMWARE_ID_MAJOR_OFFSET) & FIRMWARE_ID_MASK; + minor = (firmware_id >> FIRMWARE_ID_MINOR_OFFSET) & FIRMWARE_ID_MASK; + patch = (firmware_id >> FIRMWARE_ID_PATCH_OFFSET) & FIRMWARE_ID_MASK; + + if (major != SUPPORTED_FW_MAJOR) { + dev_err(fpga->dev, "unsupported FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return -ENODEV; + } + + dev_info(fpga->dev, "compatible FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return 0; +} + +/* + * MFD upboard-fpga is ACPI driver and can recognize the AANT ID from different + * kind of upboards. We get the LED GPIO initialized information from this + * then add led-upboard driver. + */ +int upboard_led_gpio_register(struct upboard_fpga *fpga) +{ + struct gpio_led blue_led, yellow_led, green_led, red_led; + struct gpio_desc *desc; + static struct gpio_led upboard_gpio_leds[4]; + int leds = 0; + static struct gpio_led_platform_data upboard_gpio_led_platform_data; + static const struct mfd_cell upboard_gpio_led_cells[] = { + MFD_CELL_BASIC("leds-gpio", NULL, + &upboard_gpio_led_platform_data, + sizeof(upboard_gpio_led_platform_data), 0) + }; + int ret; + + desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + blue_led.name = "upboard:blue:"; + blue_led.gpio = desc_to_gpio(desc); + blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = blue_led; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + yellow_led.name = "upboard:yellow:"; + yellow_led.gpio = desc_to_gpio(desc); + yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = yellow_led; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + green_led.name = "upboard:green:"; + green_led.gpio = desc_to_gpio(desc); + green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = green_led; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + red_led.name = "upboard:red:"; + red_led.gpio = desc_to_gpio(desc); + red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = red_led; + devm_gpiod_put(fpga->dev, desc); + } + + /* no LEDs */ + if (leds == 0) + return 0; + + upboard_gpio_led_platform_data.num_leds = leds; + upboard_gpio_led_platform_data.leds = upboard_gpio_leds; + + ret = devm_mfd_add_devices(fpga->dev, PLATFORM_DEVID_AUTO, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL); + if (ret) { + dev_err(fpga->dev, "Failed to add GPIO LEDs", ret); + return ret; + } + + return 0; +} + +static const struct acpi_device_id upboard_fpga_acpi_match[] = { + { "AANT0000", (kernel_ulong_t)&upboard_pinctrl_data }, + { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data }, + { "AANT0F02", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data }, + { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data }, + { } +}; +MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match); + +static int __init upboard_fpga_probe(struct platform_device *pdev) +{ + struct upboard_fpga *fpga; + const struct acpi_device_id *id; + const struct upboard_fpga_data *fpga_data; + int ret; + struct device *dev = &pdev->dev; + + id = acpi_match_device(upboard_fpga_acpi_match, dev); + if (!id) + return -ENODEV; + + fpga_data = (const struct upboard_fpga_data *) id->driver_data; + + fpga = devm_kzalloc(dev, sizeof(*fpga), GFP_KERNEL); + if (!fpga) + return -ENOMEM; + + platform_set_drvdata(pdev, fpga); + fpga->regmap = devm_regmap_init(dev, NULL, fpga, fpga_data->cpld_config); + fpga->cpld_config = fpga_data->cpld_config; + + if (IS_ERR(fpga->regmap)) + return PTR_ERR(fpga->regmap); + + ret = upboard_fpga_gpio_init(fpga); + if (ret) { + /* + * This is for compatiable with some upboards w/o FPGA firmware, + * so just showing debug info and do not return directly. + */ + dev_warn(dev, "Failed to initialize FPGA common GPIOs: %d", ret); + } else { + upboard_fpga_show_firmware_info(fpga); + } + + /* register GPIO LEDs */ + ret = upboard_led_gpio_register(fpga); + if (ret) { + /* + * This is for compatiable with some upboards w/o LEDs. + */ + dev_warn(dev, "Failed to register LEDs: %d", ret); + } + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, + fpga_data->cells, + fpga_data->ncells, + NULL, 0, NULL); +} + +static struct platform_driver upboard_fpga_driver = { + .driver = { + .name = "upboard-fpga", + .acpi_match_table = upboard_fpga_acpi_match, + }, +}; +module_platform_driver_probe(upboard_fpga_driver, upboard_fpga_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board CPLD/FPGA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/upboard-fpga.h b/include/linux/mfd/upboard-fpga.h new file mode 100644 index 000000000000..1fa073e5c53c --- /dev/null +++ b/include/linux/mfd/upboard-fpga.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UP Board CPLD/FPGA driver + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + * + */ + +#ifndef __LINUX_MFD_UPBOARD_FPGA_H +#define __LINUX_MFD_UPBOARD_FPGA_H + +#include +#include + +/* CPLD/FPGA protocol version */ +#define UPFPGA_PROTOCOL_V1_HRV 1 +#define UPFPGA_PROTOCOL_V2_HRV 2 + +#define UPFPGA_ADDRESS_SIZE 7 +#define UPFPGA_REGISTER_SIZE 16 + +#define UPFPGA_READ_FLAG (1 << UPFPGA_ADDRESS_SIZE) + +enum upboard_fpgareg { + UPFPGA_REG_PLATFORM_ID = 0x10, + UPFPGA_REG_FIRMWARE_ID = 0x11, + UPFPGA_REG_FUNC_EN0 = 0x20, + UPFPGA_REG_FUNC_EN1 = 0x21, + UPFPGA_REG_GPIO_EN0 = 0x30, + UPFPGA_REG_GPIO_EN1 = 0x31, + UPFPGA_REG_GPIO_EN2 = 0x32, + UPFPGA_REG_GPIO_DIR0 = 0x40, + UPFPGA_REG_GPIO_DIR1 = 0x41, + UPFPGA_REG_GPIO_DIR2 = 0x42, + UPFPGA_REG_MAX, +}; + +struct upboard_fpga { + struct device *dev; + struct regmap *regmap; + struct regmap_config *cpld_config; + struct gpio_desc *enable_gpio; + struct gpio_desc *reset_gpio; + struct gpio_desc *clear_gpio; + struct gpio_desc *strobe_gpio; + struct gpio_desc *datain_gpio; + struct gpio_desc *dataout_gpio; + bool uninitialised; +}; + +struct upboard_led_data { + unsigned int bit; + const char *colour; +}; + +bool regmap_check_writeable(struct upboard_fpga *fpga, unsigned int reg); +int upboard_led_gpio_register(struct upboard_fpga *fpga); + +#endif /* __LINUX_MFD_UPBOARD_FPGA_H */