diff mbox series

[v5,3/9] serial: sc16is7xx: refactor GPIO controller registration

Message ID 20230601163113.2785657-4-hugo@hugovil.com
State Superseded
Headers show
Series None | expand

Commit Message

Hugo Villeneuve June 1, 2023, 4:31 p.m. UTC
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

In preparation for upcoming patch "fix regression with GPIO
configuration". To facilitate review and make code more modular.

Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
---
 drivers/tty/serial/sc16is7xx.c | 39 ++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 16 deletions(-)

Comments

Hugo Villeneuve June 1, 2023, 6:27 p.m. UTC | #1
On Thu, 01 Jun 2023 19:28:01 +0200
m.brock@vanmierlo.com wrote:

> Hugo Villeneuve schreef op 2023-06-01 18:31:
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > 
> > In preparation for upcoming patch "fix regression with GPIO
> > configuration". To facilitate review and make code more modular.
> > 
> > Cc: <stable@vger.kernel.org> # 6.1.x
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
> > Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
> > ---
> >  drivers/tty/serial/sc16is7xx.c | 39 ++++++++++++++++++++--------------
> >  1 file changed, 23 insertions(+), 16 deletions(-)
> > 
> > diff --git a/drivers/tty/serial/sc16is7xx.c 
> > b/drivers/tty/serial/sc16is7xx.c
> > index 0c903d44429c..279d7dcb1447 100644
> > --- a/drivers/tty/serial/sc16is7xx.c
> > +++ b/drivers/tty/serial/sc16is7xx.c
> > @@ -1349,6 +1349,26 @@ static int
> > sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
> > 
> >  	return 0;
> >  }
> > +
> > +static int sc16is7xx_setup_gpio_chip(struct device *dev)
> 
> Only one parameter, but...
> 
> > +	ret = sc16is7xx_setup_gpio_chip(dev, mctrl_mask);
> 
> called with two.

Hi Maarten,
sorry about that, I will fix this for V6.

Somehow my automated compile script tested each patch separately, including this one, but the defconfig didn't enable the module sc6is7xx, so the error went unnoticed. I wrongly assumed that "make alldefconfig" enabled all modules, I will instead use "make allyesconfig".

Hugo.
diff mbox series

Patch

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 0c903d44429c..279d7dcb1447 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1349,6 +1349,26 @@  static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
 
 	return 0;
 }
+
+static int sc16is7xx_setup_gpio_chip(struct device *dev)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(dev);
+
+	if (!s->devtype->nr_gpio)
+		return 0;
+
+	s->gpio.owner		 = THIS_MODULE;
+	s->gpio.parent		 = dev;
+	s->gpio.label		 = dev_name(dev);
+	s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
+	s->gpio.get		 = sc16is7xx_gpio_get;
+	s->gpio.direction_output = sc16is7xx_gpio_direction_output;
+	s->gpio.set		 = sc16is7xx_gpio_set;
+	s->gpio.base		 = -1;
+	s->gpio.ngpio		 = s->devtype->nr_gpio;
+	s->gpio.can_sleep	 = 1;
+	return gpiochip_add_data(&s->gpio, s);
+}
 #endif
 
 static const struct serial_rs485 sc16is7xx_rs485_supported = {
@@ -1502,22 +1522,9 @@  static int sc16is7xx_probe(struct device *dev,
 	}
 
 #ifdef CONFIG_GPIOLIB
-	if (devtype->nr_gpio) {
-		/* Setup GPIO cotroller */
-		s->gpio.owner		 = THIS_MODULE;
-		s->gpio.parent		 = dev;
-		s->gpio.label		 = dev_name(dev);
-		s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
-		s->gpio.get		 = sc16is7xx_gpio_get;
-		s->gpio.direction_output = sc16is7xx_gpio_direction_output;
-		s->gpio.set		 = sc16is7xx_gpio_set;
-		s->gpio.base		 = -1;
-		s->gpio.ngpio		 = devtype->nr_gpio;
-		s->gpio.can_sleep	 = 1;
-		ret = gpiochip_add_data(&s->gpio, s);
-		if (ret)
-			goto out_thread;
-	}
+	ret = sc16is7xx_setup_gpio_chip(dev, mctrl_mask);
+	if (ret)
+		goto out_thread;
 #endif
 
 	/*