diff mbox series

[v2,09/11] arm64: renesas: r9a08g045: Add the Ethernet nodes

Message ID 20231207070700.4156557-10-claudiu.beznea.uj@bp.renesas.com
State New
Headers show
Series renesas: rzg3s: Add support for Ethernet | expand

Commit Message

Claudiu Dec. 7, 2023, 7:06 a.m. UTC
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Add the Ethernet nodes available on RZ/G3S (R9A08G045).

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v2:
- added phy-mode = "rgmii" and #address-cells, #size-cells for both
  Ethernet nodes
  
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)

Comments

Geert Uytterhoeven Dec. 13, 2023, 2 p.m. UTC | #1
On Thu, Dec 7, 2023 at 8:08 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Add the Ethernet nodes available on RZ/G3S (R9A08G045).
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v2:
> - added phy-mode = "rgmii" and #address-cells, #size-cells for both
>   Ethernet nodes

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.8.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index 6c7b29b69d0e..aaab5739c134 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -149,6 +149,44 @@  sdhi2: mmc@11c20000 {
 			status = "disabled";
 		};
 
+		eth0: ethernet@11c30000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c40000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c40000 0 0x10000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@12400000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;