diff --git a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
new file mode 100644
index 000000000000..5f00604bf48c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 pin controller
+
+description: >
+  The EyeQ5 pin controller handles the two pin banks of the system. It belongs
+  to a system-controller block called OLB.
+
+  Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
+  muxing supports two functions for each pin: first is GPIO, second is
+  pin-dependent.
+
+  Pins and groups are bijective.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+$ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mobileye,eyeq5-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "-pins?$":
+    type: object
+    description: Pin muxing configuration.
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio,
+               # Bank A
+               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+               spi1, refclk0,
+               # Bank B
+               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA28, PB0 - PB22
+                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: timer5
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA10, PA11]
+      - if:
+          properties:
+            function:
+              const: uart1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA12, PA13]
+      - if:
+          properties:
+            function:
+              const: can0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA14, PA15]
+      - if:
+          properties:
+            function:
+              const: can1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA16, PA17]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA18, PA19, PA20, PA21, PA22]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA23, PA24, PA25, PA26, PA27]
+      - if:
+          properties:
+            function:
+              const: refclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA28]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB0, PB1]
+      - if:
+          properties:
+            function:
+              const: timer4
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB2, PB3]
+      - if:
+          properties:
+            function:
+              const: timer6
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB4, PB5, PB6, PB7]
+      - if:
+          properties:
+            function:
+              const: uart2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB8, PB9]
+      - if:
+          properties:
+            function:
+              const: can2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB10, PB11]
+      - if:
+          properties:
+            function:
+              const: spi2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB12, PB13, PB14, PB15, PB16]
+      - if:
+          properties:
+            function:
+              const: spi3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB17, PB18, PB19, PB20, PB21]
+      - if:
+          properties:
+            function:
+              const: mclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB22]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index d5348fbbace6..a09899acfa6a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14791,6 +14791,7 @@ L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml
 F:	Documentation/devicetree/bindings/mips/mobileye.yaml
+F:	Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
 F:	Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
 F:	arch/mips/boot/dts/mobileye/
 F:	arch/mips/configs/eyeq5_defconfig
