| Message ID | 20240719203946.22909-4-laurent.pinchart@ideasonboard.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ADP5585 GPIO expander, PWM and keypad controller support | expand |
On Fri, Jul 19, 2024 at 11:39:45PM +0300, Laurent Pinchart wrote: > From: Haibo Chen <haibo.chen@nxp.com> > > The ADP5585 is a 10/11 input/output port expander with a built in keypad > matrix decoder, programmable logic, reset generator, and PWM generator. > This driver supports the GPIO function using the platform device > registered by the core MFD driver. > > The driver is derived from an initial implementation from NXP, available > in commit 451f61b46b76 ("MLK-25917-2 gpio: adp5585-gpio: add > adp5585-gpio support") in their BSP kernel tree. It has been extensively > rewritten. > > Signed-off-by: Haibo Chen <haibo.chen@nxp.com> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> > Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > Changes compared to v2: > > - Add missing headers > - Drop platform_set_drvdata() > - Fix bit shift in bias configuration > > Changes compared to v1: > > - Drop OF match table > - Fix .get() for GPOs > - Add platform ID table > - Set struct device of_node manually > - Merge child DT node into parent node > - Implement .get_direction() > - Drop mutex > > Changes compared to the NXP original version > > - Add MAINTAINERS entry > - Add prefix to compatible string > - Switch to regmap > - White space fixes > - Use sizeof(*variable) > - Initialize variables at declaration time > - Use mutex scope guards > - Cleanup header includes > - Support R5 GPIO pin > - Reorder functions > - Add bias support > - Return real pin value from .get() > - Add debounce support > - Add drive mode support > - Destroy mutex on remove > - Update copyright > - Update license to GPL-2.0-only > --- > MAINTAINERS | 1 + > drivers/gpio/Kconfig | 7 ++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-adp5585.c | 231 ++++++++++++++++++++++++++++++++++++ > 4 files changed, 240 insertions(+) > create mode 100644 drivers/gpio/gpio-adp5585.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index ebb1a1833bbc..b748af2acf9f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -532,6 +532,7 @@ L: linux-gpio@vger.kernel.org > L: linux-pwm@vger.kernel.org > S: Maintained > F: Documentation/devicetree/bindings/*/adi,adp5585*.yaml > +F: drivers/gpio/gpio-adp5585.c > F: drivers/mfd/adp5585.c > F: include/linux/mfd/adp5585.h > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 1c28a48915bb..fc66e8264eef 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -1233,6 +1233,13 @@ config GPIO_ADP5520 > This option enables support for on-chip GPIO found > on Analog Devices ADP5520 PMICs. > > +config GPIO_ADP5585 > + tristate "GPIO Support for ADP5585" > + depends on MFD_ADP5585 > + help > + This option enables support for the GPIO function found in the Analog > + Devices ADP5585. > + > config GPIO_ALTERA_A10SR > tristate "Altera Arria10 System Resource GPIO" > depends on MFD_ALTERA_A10SR > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index e2a53013780e..04bfa2bc7e11 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o > obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o > obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o > obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o > +obj-$(CONFIG_GPIO_ADP5585) += gpio-adp5585.o > obj-$(CONFIG_GPIO_AGGREGATOR) += gpio-aggregator.o > obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o > obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o > diff --git a/drivers/gpio/gpio-adp5585.c b/drivers/gpio/gpio-adp5585.c > new file mode 100644 > index 000000000000..49f8d91623ba > --- /dev/null > +++ b/drivers/gpio/gpio-adp5585.c > @@ -0,0 +1,231 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Analog Devices ADP5585 GPIO driver > + * > + * Copyright 2022 NXP > + * Copyright 2024 Ideas on Board Oy > + */ > + > +#include <linux/device.h> > +#include <linux/gpio/driver.h> > +#include <linux/mfd/adp5585.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/types.h> > + > +#define ADP5585_GPIO_MAX 11 > + > +struct adp5585_gpio_dev { > + struct gpio_chip gpio_chip; > + struct regmap *regmap; > +}; > + > +static int adp5585_gpio_get_direction(struct gpio_chip *chip, unsigned int off) > +{ > + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); > + unsigned int bank = ADP5585_BANK(off); > + unsigned int bit = ADP5585_BIT(off); > + unsigned int val; > + > + regmap_read(adp5585_gpio->regmap, ADP5585_GPIO_DIRECTION_A + bank, &val); > + > + return val & bit ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; > +} > + > +static int adp5585_gpio_direction_input(struct gpio_chip *chip, unsigned int off) > +{ > + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); > + unsigned int bank = ADP5585_BANK(off); > + unsigned int bit = ADP5585_BIT(off); > + > + return regmap_update_bits(adp5585_gpio->regmap, > + ADP5585_GPIO_DIRECTION_A + bank, > + bit, 0); regmap_clear_bits()? > +} > + > +static int adp5585_gpio_direction_output(struct gpio_chip *chip, unsigned int off, int val) > +{ > + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); > + unsigned int bank = ADP5585_BANK(off); > + unsigned int bit = ADP5585_BIT(off); > + int ret; > + > + ret = regmap_update_bits(adp5585_gpio->regmap, > + ADP5585_GPO_DATA_OUT_A + bank, bit, > + val ? bit : 0); > + if (ret) > + return ret; > + > + return regmap_update_bits(adp5585_gpio->regmap, > + ADP5585_GPIO_DIRECTION_A + bank, > + bit, bit); regmap_set_bits()? > +} > + > +static int adp5585_gpio_get_value(struct gpio_chip *chip, unsigned int off) > +{ > + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); > + unsigned int bank = ADP5585_BANK(off); > + unsigned int bit = ADP5585_BIT(off); > + unsigned int reg; > + unsigned int val; > + > + /* > + * The input status register doesn't reflect the pin state when the > + * GPIO is configured as an output. Check the direction, and read the > + * input status from GPI_STATUS or output value from GPO_DATA_OUT > + * accordingly. > + * > + * We don't need any locking, as concurrent access to the same GPIO > + * isn't allowed by the GPIO API, so there's no risk of the > + * .direction_input(), .direction_output() or .set() operations racing > + * with this. > + */ > + regmap_read(adp5585_gpio->regmap, ADP5585_GPIO_DIRECTION_A + bank, &val); > + reg = val & bit ? ADP5585_GPO_DATA_OUT_A : ADP5585_GPI_STATUS_A; > + regmap_read(adp5585_gpio->regmap, reg + bank, &val); > + > + return !!(val & bit); > +} > + > +static void adp5585_gpio_set_value(struct gpio_chip *chip, unsigned int off, int val) > +{ > + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); > + unsigned int bank = ADP5585_BANK(off); > + unsigned int bit = ADP5585_BIT(off); > + > + regmap_update_bits(adp5585_gpio->regmap, ADP5585_GPO_DATA_OUT_A + bank, > + bit, val ? bit : 0); > +} > + > +static int adp5585_gpio_set_bias(struct adp5585_gpio_dev *adp5585_gpio, > + unsigned int off, unsigned int bias) > +{ > + unsigned int bit, reg, mask, val; > + > + /* > + * The bias configuration fields are 2 bits wide and laid down in > + * consecutive registers ADP5585_RPULL_CONFIG_*, with a hole of 4 bits > + * after R5. > + */ > + bit = off * 2 + (off > 5 ? 4 : 0); > + reg = ADP5585_RPULL_CONFIG_A + bit / 8; > + mask = ADP5585_Rx_PULL_CFG_MASK << (bit % 8); > + val = bias << (bit % 8); > + > + return regmap_update_bits(adp5585_gpio->regmap, reg, mask, val); > +} > + > +static int adp5585_gpio_set_drive(struct adp5585_gpio_dev *adp5585_gpio, > + unsigned int off, enum pin_config_param drive) > +{ > + unsigned int bank = ADP5585_BANK(off); > + unsigned int bit = ADP5585_BIT(off); > + > + return regmap_update_bits(adp5585_gpio->regmap, > + ADP5585_GPO_OUT_MODE_A + bank, bit, > + drive == PIN_CONFIG_DRIVE_OPEN_DRAIN ? 1 : 0); look like should be drive == PIN_CONFIG_DRIVE_OPEN_DRAIN ? bit : 0 same as the other place. > +} > + > +static int adp5585_gpio_set_debounce(struct adp5585_gpio_dev *adp5585_gpio, > + unsigned int off, unsigned int debounce) > +{ > + unsigned int bank = ADP5585_BANK(off); > + unsigned int bit = ADP5585_BIT(off); > + > + return regmap_update_bits(adp5585_gpio->regmap, > + ADP5585_DEBOUNCE_DIS_A + bank, bit, > + debounce ? 0 : 1); > +} > + > +static int adp5585_gpio_set_config(struct gpio_chip *chip, unsigned int off, > + unsigned long config) > +{ > + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); > + enum pin_config_param param = pinconf_to_config_param(config); > + u32 arg = pinconf_to_config_argument(config); > + > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + return adp5585_gpio_set_bias(adp5585_gpio, off, > + ADP5585_Rx_PULL_CFG_DISABLE); > + > + case PIN_CONFIG_BIAS_PULL_DOWN: > + return adp5585_gpio_set_bias(adp5585_gpio, off, arg ? > + ADP5585_Rx_PULL_CFG_PD_300K : > + ADP5585_Rx_PULL_CFG_DISABLE); > + > + case PIN_CONFIG_BIAS_PULL_UP: > + return adp5585_gpio_set_bias(adp5585_gpio, off, arg ? > + ADP5585_Rx_PULL_CFG_PU_300K : > + ADP5585_Rx_PULL_CFG_DISABLE); > + > + case PIN_CONFIG_DRIVE_OPEN_DRAIN: > + case PIN_CONFIG_DRIVE_PUSH_PULL: > + return adp5585_gpio_set_drive(adp5585_gpio, off, param); > + > + case PIN_CONFIG_INPUT_DEBOUNCE: > + return adp5585_gpio_set_debounce(adp5585_gpio, off, arg); > + > + default: > + return -ENOTSUPP; > + }; > +} > + > +static int adp5585_gpio_probe(struct platform_device *pdev) > +{ > + struct adp5585_dev *adp5585 = dev_get_drvdata(pdev->dev.parent); > + struct adp5585_gpio_dev *adp5585_gpio; > + struct device *dev = &pdev->dev; > + struct gpio_chip *gc; > + int ret; > + > + adp5585_gpio = devm_kzalloc(dev, sizeof(*adp5585_gpio), GFP_KERNEL); > + if (!adp5585_gpio) > + return -ENOMEM; > + > + adp5585_gpio->regmap = adp5585->regmap; > + > + device_set_of_node_from_dev(dev, dev->parent); > + > + gc = &adp5585_gpio->gpio_chip; > + gc->parent = dev; > + gc->get_direction = adp5585_gpio_get_direction; > + gc->direction_input = adp5585_gpio_direction_input; > + gc->direction_output = adp5585_gpio_direction_output; > + gc->get = adp5585_gpio_get_value; > + gc->set = adp5585_gpio_set_value; > + gc->set_config = adp5585_gpio_set_config; > + gc->can_sleep = true; > + > + gc->base = -1; > + gc->ngpio = ADP5585_GPIO_MAX; > + gc->label = pdev->name; > + gc->owner = THIS_MODULE; > + > + ret = devm_gpiochip_add_data(dev, &adp5585_gpio->gpio_chip, > + adp5585_gpio); > + if (ret) > + return dev_err_probe(dev, ret, "failed to add GPIO chip\n"); > + > + return 0; > +} > + > +static const struct platform_device_id adp5585_gpio_id_table[] = { > + { "adp5585-gpio" }, > + { /* Sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(platform, adp5585_gpio_id_table); > + > +static struct platform_driver adp5585_gpio_driver = { > + .driver = { > + .name = "adp5585-gpio", > + }, > + .probe = adp5585_gpio_probe, > + .id_table = adp5585_gpio_id_table, > +}; > +module_platform_driver(adp5585_gpio_driver); > + > +MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>"); > +MODULE_DESCRIPTION("GPIO ADP5585 Driver"); > +MODULE_LICENSE("GPL"); > -- > Regards, > > Laurent Pinchart >
diff --git a/MAINTAINERS b/MAINTAINERS index ebb1a1833bbc..b748af2acf9f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -532,6 +532,7 @@ L: linux-gpio@vger.kernel.org L: linux-pwm@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/*/adi,adp5585*.yaml +F: drivers/gpio/gpio-adp5585.c F: drivers/mfd/adp5585.c F: include/linux/mfd/adp5585.h diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 1c28a48915bb..fc66e8264eef 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1233,6 +1233,13 @@ config GPIO_ADP5520 This option enables support for on-chip GPIO found on Analog Devices ADP5520 PMICs. +config GPIO_ADP5585 + tristate "GPIO Support for ADP5585" + depends on MFD_ADP5585 + help + This option enables support for the GPIO function found in the Analog + Devices ADP5585. + config GPIO_ALTERA_A10SR tristate "Altera Arria10 System Resource GPIO" depends on MFD_ALTERA_A10SR diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index e2a53013780e..04bfa2bc7e11 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o +obj-$(CONFIG_GPIO_ADP5585) += gpio-adp5585.o obj-$(CONFIG_GPIO_AGGREGATOR) += gpio-aggregator.o obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o diff --git a/drivers/gpio/gpio-adp5585.c b/drivers/gpio/gpio-adp5585.c new file mode 100644 index 000000000000..49f8d91623ba --- /dev/null +++ b/drivers/gpio/gpio-adp5585.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices ADP5585 GPIO driver + * + * Copyright 2022 NXP + * Copyright 2024 Ideas on Board Oy + */ + +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/mfd/adp5585.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +#define ADP5585_GPIO_MAX 11 + +struct adp5585_gpio_dev { + struct gpio_chip gpio_chip; + struct regmap *regmap; +}; + +static int adp5585_gpio_get_direction(struct gpio_chip *chip, unsigned int off) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + unsigned int val; + + regmap_read(adp5585_gpio->regmap, ADP5585_GPIO_DIRECTION_A + bank, &val); + + return val & bit ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; +} + +static int adp5585_gpio_direction_input(struct gpio_chip *chip, unsigned int off) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + return regmap_update_bits(adp5585_gpio->regmap, + ADP5585_GPIO_DIRECTION_A + bank, + bit, 0); +} + +static int adp5585_gpio_direction_output(struct gpio_chip *chip, unsigned int off, int val) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + int ret; + + ret = regmap_update_bits(adp5585_gpio->regmap, + ADP5585_GPO_DATA_OUT_A + bank, bit, + val ? bit : 0); + if (ret) + return ret; + + return regmap_update_bits(adp5585_gpio->regmap, + ADP5585_GPIO_DIRECTION_A + bank, + bit, bit); +} + +static int adp5585_gpio_get_value(struct gpio_chip *chip, unsigned int off) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + unsigned int reg; + unsigned int val; + + /* + * The input status register doesn't reflect the pin state when the + * GPIO is configured as an output. Check the direction, and read the + * input status from GPI_STATUS or output value from GPO_DATA_OUT + * accordingly. + * + * We don't need any locking, as concurrent access to the same GPIO + * isn't allowed by the GPIO API, so there's no risk of the + * .direction_input(), .direction_output() or .set() operations racing + * with this. + */ + regmap_read(adp5585_gpio->regmap, ADP5585_GPIO_DIRECTION_A + bank, &val); + reg = val & bit ? ADP5585_GPO_DATA_OUT_A : ADP5585_GPI_STATUS_A; + regmap_read(adp5585_gpio->regmap, reg + bank, &val); + + return !!(val & bit); +} + +static void adp5585_gpio_set_value(struct gpio_chip *chip, unsigned int off, int val) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + regmap_update_bits(adp5585_gpio->regmap, ADP5585_GPO_DATA_OUT_A + bank, + bit, val ? bit : 0); +} + +static int adp5585_gpio_set_bias(struct adp5585_gpio_dev *adp5585_gpio, + unsigned int off, unsigned int bias) +{ + unsigned int bit, reg, mask, val; + + /* + * The bias configuration fields are 2 bits wide and laid down in + * consecutive registers ADP5585_RPULL_CONFIG_*, with a hole of 4 bits + * after R5. + */ + bit = off * 2 + (off > 5 ? 4 : 0); + reg = ADP5585_RPULL_CONFIG_A + bit / 8; + mask = ADP5585_Rx_PULL_CFG_MASK << (bit % 8); + val = bias << (bit % 8); + + return regmap_update_bits(adp5585_gpio->regmap, reg, mask, val); +} + +static int adp5585_gpio_set_drive(struct adp5585_gpio_dev *adp5585_gpio, + unsigned int off, enum pin_config_param drive) +{ + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + return regmap_update_bits(adp5585_gpio->regmap, + ADP5585_GPO_OUT_MODE_A + bank, bit, + drive == PIN_CONFIG_DRIVE_OPEN_DRAIN ? 1 : 0); +} + +static int adp5585_gpio_set_debounce(struct adp5585_gpio_dev *adp5585_gpio, + unsigned int off, unsigned int debounce) +{ + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + return regmap_update_bits(adp5585_gpio->regmap, + ADP5585_DEBOUNCE_DIS_A + bank, bit, + debounce ? 0 : 1); +} + +static int adp5585_gpio_set_config(struct gpio_chip *chip, unsigned int off, + unsigned long config) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + enum pin_config_param param = pinconf_to_config_param(config); + u32 arg = pinconf_to_config_argument(config); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + return adp5585_gpio_set_bias(adp5585_gpio, off, + ADP5585_Rx_PULL_CFG_DISABLE); + + case PIN_CONFIG_BIAS_PULL_DOWN: + return adp5585_gpio_set_bias(adp5585_gpio, off, arg ? + ADP5585_Rx_PULL_CFG_PD_300K : + ADP5585_Rx_PULL_CFG_DISABLE); + + case PIN_CONFIG_BIAS_PULL_UP: + return adp5585_gpio_set_bias(adp5585_gpio, off, arg ? + ADP5585_Rx_PULL_CFG_PU_300K : + ADP5585_Rx_PULL_CFG_DISABLE); + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + case PIN_CONFIG_DRIVE_PUSH_PULL: + return adp5585_gpio_set_drive(adp5585_gpio, off, param); + + case PIN_CONFIG_INPUT_DEBOUNCE: + return adp5585_gpio_set_debounce(adp5585_gpio, off, arg); + + default: + return -ENOTSUPP; + }; +} + +static int adp5585_gpio_probe(struct platform_device *pdev) +{ + struct adp5585_dev *adp5585 = dev_get_drvdata(pdev->dev.parent); + struct adp5585_gpio_dev *adp5585_gpio; + struct device *dev = &pdev->dev; + struct gpio_chip *gc; + int ret; + + adp5585_gpio = devm_kzalloc(dev, sizeof(*adp5585_gpio), GFP_KERNEL); + if (!adp5585_gpio) + return -ENOMEM; + + adp5585_gpio->regmap = adp5585->regmap; + + device_set_of_node_from_dev(dev, dev->parent); + + gc = &adp5585_gpio->gpio_chip; + gc->parent = dev; + gc->get_direction = adp5585_gpio_get_direction; + gc->direction_input = adp5585_gpio_direction_input; + gc->direction_output = adp5585_gpio_direction_output; + gc->get = adp5585_gpio_get_value; + gc->set = adp5585_gpio_set_value; + gc->set_config = adp5585_gpio_set_config; + gc->can_sleep = true; + + gc->base = -1; + gc->ngpio = ADP5585_GPIO_MAX; + gc->label = pdev->name; + gc->owner = THIS_MODULE; + + ret = devm_gpiochip_add_data(dev, &adp5585_gpio->gpio_chip, + adp5585_gpio); + if (ret) + return dev_err_probe(dev, ret, "failed to add GPIO chip\n"); + + return 0; +} + +static const struct platform_device_id adp5585_gpio_id_table[] = { + { "adp5585-gpio" }, + { /* Sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, adp5585_gpio_id_table); + +static struct platform_driver adp5585_gpio_driver = { + .driver = { + .name = "adp5585-gpio", + }, + .probe = adp5585_gpio_probe, + .id_table = adp5585_gpio_id_table, +}; +module_platform_driver(adp5585_gpio_driver); + +MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>"); +MODULE_DESCRIPTION("GPIO ADP5585 Driver"); +MODULE_LICENSE("GPL");