@@ -50,7 +50,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
struct plat_stmmacenet_data *plat;
struct stmmac_resources res;
struct device_node *np;
- int ret, i, phy_mode;
+ int ret, phy_mode;
np = dev_of_node(&pdev->dev);
@@ -88,14 +88,11 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
goto err_put_node;
}
- /* Get the base address of device */
- for (i = 0; i < PCI_STD_NUM_BARS; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
- if (ret)
- goto err_disable_device;
- break;
+ memset(&res, 0, sizeof(res));
+ res.addr = pcim_iomap_region(pdev, 0, pci_name(pdev));
+ if (IS_ERR(res.addr)) {
+ ret = PTR_ERR(res.addr);
+ goto err_disable_device;
}
plat->bus_id = of_alias_get_id(np, "ethernet");
@@ -116,8 +113,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
loongson_default_data(plat);
pci_enable_msi(pdev);
- memset(&res, 0, sizeof(res));
- res.addr = pcim_iomap_table(pdev)[0];
res.irq = of_irq_get_byname(np, "macirq");
if (res.irq < 0) {
@@ -158,18 +153,10 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)
{
struct net_device *ndev = dev_get_drvdata(&pdev->dev);
struct stmmac_priv *priv = netdev_priv(ndev);
- int i;
of_node_put(priv->plat->mdio_node);
stmmac_dvr_remove(&pdev->dev);
- for (i = 0; i < PCI_STD_NUM_BARS; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- pcim_iounmap_regions(pdev, BIT(i));
- break;
- }
-
pci_disable_msi(pdev);
pci_disable_device(pdev);
}
@@ -188,11 +188,11 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
return ret;
}
- /* Get the base address of device */
+ /* Request the base address BAR of device */
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_len(pdev, i) == 0)
continue;
- ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
+ ret = pcim_request_region(pdev, i, pci_name(pdev));
if (ret)
return ret;
break;
@@ -205,7 +205,10 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
return ret;
memset(&res, 0, sizeof(res));
- res.addr = pcim_iomap_table(pdev)[i];
+ /* Get the base address of device */
+ res.addr = pcim_iomap(pdev, i, 0);
+ if (!res.addr)
+ return -ENOMEM;
res.wol_irq = pdev->irq;
res.irq = pdev->irq;
@@ -231,16 +234,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
*/
static void stmmac_pci_remove(struct pci_dev *pdev)
{
- int i;
-
stmmac_dvr_remove(&pdev->dev);
-
- for (i = 0; i < PCI_STD_NUM_BARS; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- pcim_iounmap_regions(pdev, BIT(i));
- break;
- }
}
static int __maybe_unused stmmac_pci_suspend(struct device *dev)
stmicro uses PCI devres in the wrong way. Resources requested through pcim_* functions don't need to be cleaned up manually in the remove() callback or in the error unwind path of a probe() function. Moreover, there is an unnecessary loop which only requests and ioremaps BAR 0, but iterates over all BARs nevertheless. Furthermore, pcim_iomap_regions() and pcim_iomap_table() have been deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace these functions with pcim_iomap_region(). Remove the unnecessary manual pcim_* cleanup calls. Remove the unnecessary loop over all BARs. Signed-off-by: Philipp Stanner <pstanner@redhat.com> --- .../ethernet/stmicro/stmmac/dwmac-loongson.c | 25 +++++-------------- .../net/ethernet/stmicro/stmmac/stmmac_pci.c | 18 +++++-------- 2 files changed, 12 insertions(+), 31 deletions(-)