diff mbox series

[v5,2/7] mfd: nxp-siul2: add support for NXP SIUL2

Message ID 20241101080614.1070819-3-andrei.stefanescu@oss.nxp.com
State New
Headers show
Series gpio: siul2-s32g2: add initial GPIO driver | expand

Commit Message

Andrei Stefanescu Nov. 1, 2024, 8:06 a.m. UTC
SIUL2 (System Integration Unit Lite) is a hardware module which
implements various functionalities:
- reading SoC information
- pinctrl
- GPIO (including interrupts)

There are multiple register types in the SIUL2 module:
- MIDR (MCU ID Register)
	* contains information about the SoC.
- Interrupt related registers
	* There are 32 interrupts named EIRQ. An EIRQ
	  may be routed to one or more GPIOs. Not all
	  GPIOs have EIRQs associated with them
- MSCR (Multiplexed Signal Configuration Register)
	* handle pinmuxing and pinconf
- IMCR (Input Multiplexed Signal Configuration Register)
	* are part of pinmuxing
- PGPDO/PGPDI (Parallel GPIO Pad Data Out/In Register)
	* Write/Read the GPIO value

There are two SIUL2 modules in the S32G SoC. This driver handles
both because functionality is shared between them. For example:
some GPIOs in SIUL2_0 have interrupt capability but the registers
configuring this are in SIUL2_1.

Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
---
 drivers/mfd/Kconfig           |  12 +
 drivers/mfd/Makefile          |   1 +
 drivers/mfd/nxp-siul2.c       | 411 ++++++++++++++++++++++++++++++++++
 include/linux/mfd/nxp-siul2.h |  55 +++++
 4 files changed, 479 insertions(+)
 create mode 100644 drivers/mfd/nxp-siul2.c
 create mode 100644 include/linux/mfd/nxp-siul2.h
diff mbox series

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f9325bcce1b9..fc590789e8b3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1098,6 +1098,18 @@  config MFD_NTXEC
 	  certain e-book readers designed by the original design manufacturer
 	  Netronix.
 
+config MFD_NXP_SIUL2
+	tristate "NXP SIUL2 MFD driver"
+	select MFD_CORE
+	select REGMAP_MMIO
+	depends on ARCH_S32 || COMPILE_TEST
+	help
+	  Select this to get support for the NXP SIUL2 (System Integration
+	  Unit Lite) module. This hardware block contains registers for
+	  SoC information, pinctrl and GPIO functionality. This will
+	  probe a MFD driver which will contain cells for a combined
+	  pinctrl&GPIO driver and nvmem drivers for the SoC information.
+
 config MFD_RETU
 	tristate "Nokia Retu and Tahvo multi-function device"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2a9f91e81af8..7b19ea014221 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -226,6 +226,7 @@  obj-$(CONFIG_MFD_INTEL_PMC_BXT)	+= intel_pmc_bxt.o
 obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_NTXEC)		+= ntxec.o
+obj-$(CONFIG_MFD_NXP_SIUL2) 	+= nxp-siul2.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_RK8XX)		+= rk8xx-core.o
 obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
diff --git a/drivers/mfd/nxp-siul2.c b/drivers/mfd/nxp-siul2.c
new file mode 100644
index 000000000000..ba13d1beb244
--- /dev/null
+++ b/drivers/mfd/nxp-siul2.c
@@ -0,0 +1,411 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SIUL2(System Integration Unit Lite) MFD driver
+ *
+ * Copyright 2024 NXP
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/nxp-siul2.h>
+
+#define S32G_NUM_SIUL2 2
+
+#define S32_REG_RANGE(start, end, name, access)		\
+	{						\
+		.reg_name = (name),			\
+		.reg_start_offset = (start),		\
+		.reg_end_offset = (end),		\
+		.reg_access = (access),			\
+		.valid = true,				\
+	}
+
+#define S32_INVALID_REG_RANGE		\
+	{				\
+		.reg_name = NULL,	\
+		.reg_access = NULL,	\
+		.valid = false,		\
+	}
+
+static const struct mfd_cell nxp_siul2_devs[] = {
+	{
+		.name = "s32g-siul2-pinctrl",
+	}
+};
+
+/**
+ * struct nxp_siul2_reg_range_info: a register range in SIUL2
+ * @reg_start_offset: the first valid register offset
+ * @reg_end_offset: the last valid register offset
+ * @reg_access: the read/write access tables if not NULL
+ * @valid: whether the register range is valid or not
+ */
+struct nxp_siul2_reg_range_info {
+	const char *reg_name;
+	unsigned int reg_start_offset;
+	unsigned int reg_end_offset;
+	const struct regmap_access_table *reg_access;
+	bool valid;
+};
+
+static const struct regmap_range s32g2_siul2_0_imcr_reg_ranges[] = {
+	/* IMCR0 - IMCR1 */
+	regmap_reg_range(0, 4),
+	/* IMCR3 - IMCR61 */
+	regmap_reg_range(0xC, 0xF4),
+	/* IMCR68 - IMCR83 */
+	regmap_reg_range(0x110, 0x14C)
+};
+
+static const struct regmap_access_table s32g2_siul2_0_imcr = {
+	.yes_ranges = s32g2_siul2_0_imcr_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(s32g2_siul2_0_imcr_reg_ranges)
+};
+
+static const struct regmap_range s32g2_siul2_0_pgpd_reg_ranges[] = {
+	/* PGPD*0 - PGPD*5 */
+	regmap_reg_range(0, 0xA),
+	/* PGPD*6 - PGPD*6 */
+	regmap_reg_range(0xE, 0xE),
+};
+
+static const struct regmap_access_table s32g2_siul2_0_pgpd = {
+	.yes_ranges = s32g2_siul2_0_pgpd_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(s32g2_siul2_0_pgpd_reg_ranges)
+};
+
+static const struct regmap_range s32g2_siul2_1_irq_reg_ranges[] = {
+	/* DISR0 */
+	regmap_reg_range(0x10, 0x10),
+	/* DIRER0 */
+	regmap_reg_range(0x18, 0x18),
+	/* DIRSR0 */
+	regmap_reg_range(0x20, 0x20),
+	/* IREER0 */
+	regmap_reg_range(0x28, 0x28),
+	/* IFEER0 */
+	regmap_reg_range(0x30, 0x30),
+};
+
+static const struct regmap_access_table s32g2_siul2_1_irq = {
+	.yes_ranges = s32g2_siul2_1_irq_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(s32g2_siul2_1_irq_reg_ranges),
+};
+
+static const struct regmap_range s32g2_siul2_1_irq_volatile_reg_range[] = {
+	/* DISR0 */
+	regmap_reg_range(0x10, 0x10)
+};
+
+static const struct regmap_access_table s32g2_siul2_1_irq_volatile = {
+	.yes_ranges = s32g2_siul2_1_irq_volatile_reg_range,
+	.n_yes_ranges = ARRAY_SIZE(s32g2_siul2_1_irq_volatile_reg_range),
+};
+
+static const struct regmap_range s32g2_siul2_1_mscr_reg_ranges[] = {
+	/* MSCR112 - MSCR122 */
+	regmap_reg_range(0, 0x28),
+	/* MSCR144 - MSCR190 */
+	regmap_reg_range(0x80, 0x138)
+};
+
+static const struct regmap_access_table s32g2_siul2_1_mscr = {
+	.yes_ranges = s32g2_siul2_1_mscr_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(s32g2_siul2_1_mscr_reg_ranges),
+};
+
+static const struct regmap_range s32g2_siul2_1_imcr_reg_ranges[] = {
+	/* IMCR119 - IMCR121 */
+	regmap_reg_range(0, 8),
+	/* IMCR128 - IMCR129 */
+	regmap_reg_range(0x24, 0x28),
+	/* IMCR143 - IMCR151 */
+	regmap_reg_range(0x60, 0x80),
+	/* IMCR153 - IMCR161 */
+	regmap_reg_range(0x88, 0xA8),
+	/* IMCR205 - IMCR212 */
+	regmap_reg_range(0x158, 0x174),
+	/* IMCR224 - IMCR225 */
+	regmap_reg_range(0x1A4, 0x1A8),
+	/* IMCR233 - IMCR248 */
+	regmap_reg_range(0x1C8, 0x204),
+	/* IMCR273 - IMCR274 */
+	regmap_reg_range(0x268, 0x26C),
+	/* IMCR278 - IMCR281 */
+	regmap_reg_range(0x27C, 0x288),
+	/* IMCR283 - IMCR286 */
+	regmap_reg_range(0x290, 0x29C),
+	/* IMCR288 - IMCR294 */
+	regmap_reg_range(0x2A4, 0x2BC),
+	/* IMCR296 - IMCR302 */
+	regmap_reg_range(0x2C4, 0x2DC),
+	/* IMCR304 - IMCR310 */
+	regmap_reg_range(0x2E4, 0x2FC),
+	/* IMCR312 - IMCR314 */
+	regmap_reg_range(0x304, 0x30C),
+	/* IMCR316 */
+	regmap_reg_range(0x314, 0x314),
+	/* IMCR 318 */
+	regmap_reg_range(0x31C, 0x31C),
+	/* IMCR322 - IMCR340 */
+	regmap_reg_range(0x32C, 0x374),
+	/* IMCR343 - IMCR360 */
+	regmap_reg_range(0x380, 0x3C4),
+	/* IMCR363 - IMCR380 */
+	regmap_reg_range(0x3D0, 0x414),
+	/* IMCR383 - IMCR393 */
+	regmap_reg_range(0x420, 0x448),
+	/* IMCR398 - IMCR433 */
+	regmap_reg_range(0x45C, 0x4E8),
+	/* IMCR467 - IMCR470 */
+	regmap_reg_range(0x570, 0x57C),
+	/* IMCR473 - IMCR475 */
+	regmap_reg_range(0x588, 0x590),
+	/* IMCR478 - IMCR480*/
+	regmap_reg_range(0x59C, 0x5A4),
+	/* IMCR483 - IMCR485 */
+	regmap_reg_range(0x5B0, 0x5B8),
+	/* IMCR488 - IMCR490 */
+	regmap_reg_range(0x5C4, 0x5CC),
+	/* IMCR493 - IMCR495 */
+	regmap_reg_range(0x5D8, 0x5E0),
+};
+
+static const struct regmap_access_table s32g2_siul2_1_imcr = {
+	.yes_ranges = s32g2_siul2_1_imcr_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(s32g2_siul2_1_imcr_reg_ranges)
+};
+
+static const struct regmap_range s32g2_siul2_1_pgpd_reg_ranges[] = {
+	/* PGPD*7 */
+	regmap_reg_range(0xC, 0xC),
+	/* PGPD*9 */
+	regmap_reg_range(0x10, 0x10),
+	/* PDPG*10 - PGPD*11 */
+	regmap_reg_range(0x14, 0x16),
+};
+
+static const struct regmap_access_table s32g2_siul2_1_pgpd = {
+	.yes_ranges = s32g2_siul2_1_pgpd_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(s32g2_siul2_1_pgpd_reg_ranges)
+};
+
+static const struct nxp_siul2_reg_range_info
+s32g2_reg_ranges[S32G_NUM_SIUL2][SIUL2_NUM_REG_TYPES] = {
+	/* SIUL2_0 */
+	{
+		[SIUL2_MPIDR] = S32_REG_RANGE(4, 8, "SIUL2_0_MPIDR", NULL),
+		/* Interrupts are to be controlled from SIUL2_1 */
+		[SIUL2_IRQ] = S32_INVALID_REG_RANGE,
+		[SIUL2_MSCR] = S32_REG_RANGE(0x240, 0x3D4, "SIUL2_0_MSCR",
+					     NULL),
+		[SIUL2_IMCR] = S32_REG_RANGE(0xA40, 0xB8C, "SIUL2_0_IMCR",
+					     &s32g2_siul2_0_imcr),
+		[SIUL2_PGPDO] = S32_REG_RANGE(0x1700, 0x170E,
+					      "SIUL2_0_PGPDO",
+					      &s32g2_siul2_0_pgpd),
+		[SIUL2_PGPDI] = S32_REG_RANGE(0x1740, 0x174E,
+					      "SIUL2_0_PGPDI",
+					      &s32g2_siul2_0_pgpd),
+	},
+	/* SIUL2_1 */
+	{
+		[SIUL2_MPIDR] = S32_REG_RANGE(4, 8, "SIUL2_1_MPIDR", NULL),
+		[SIUL2_IRQ] = S32_REG_RANGE(0x10, 0xC0, "SIUL2_1_IRQ",
+					    &s32g2_siul2_1_irq),
+		[SIUL2_MSCR] = S32_REG_RANGE(0x400, 0x538, "SIUL2_1_MSCR",
+					     &s32g2_siul2_1_mscr),
+		[SIUL2_IMCR] = S32_REG_RANGE(0xC1C, 0x11FC, "SIUL2_1_IMCR",
+					     &s32g2_siul2_1_imcr),
+		[SIUL2_PGPDO] = S32_REG_RANGE(0x1700, 0x1716,
+					      "SIUL2_1_PGPDO",
+					      &s32g2_siul2_1_pgpd),
+		[SIUL2_PGPDI] = S32_REG_RANGE(0x1740, 0x1756,
+					      "SIUL2_1_PGPDI",
+					      &s32g2_siul2_1_pgpd),
+	},
+};
+
+static const struct regmap_config nxp_siul2_regmap_irq_conf = {
+	.val_bits = 32,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.cache_type = REGCACHE_FLAT,
+	.use_raw_spinlock = true,
+	.volatile_table = &s32g2_siul2_1_irq_volatile,
+};
+
+static const struct regmap_config nxp_siul2_regmap_generic_conf = {
+	.val_bits = 32,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.cache_type = REGCACHE_FLAT,
+	.use_raw_spinlock = true,
+};
+
+static const struct regmap_config nxp_siul2_regmap_pgpdo_conf = {
+	.val_bits = 16,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.reg_bits = 32,
+	.reg_stride = 2,
+	.cache_type = REGCACHE_FLAT,
+	.use_raw_spinlock = true,
+};
+
+static const struct regmap_config nxp_siul2_regmap_pgpdi_conf = {
+	.val_bits = 16,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.reg_bits = 32,
+	.reg_stride = 2,
+	.cache_type = REGCACHE_NONE,
+	.use_raw_spinlock = true,
+};
+
+static int nxp_siul2_init_regmap(struct platform_device *pdev,
+				 void __iomem *base, int siul)
+{
+	struct regmap_config regmap_configs[SIUL2_NUM_REG_TYPES] = {
+		[SIUL2_MPIDR]	= nxp_siul2_regmap_generic_conf,
+		[SIUL2_IRQ]	= nxp_siul2_regmap_irq_conf,
+		[SIUL2_MSCR]	= nxp_siul2_regmap_generic_conf,
+		[SIUL2_IMCR]	= nxp_siul2_regmap_generic_conf,
+		[SIUL2_PGPDO]	= nxp_siul2_regmap_pgpdo_conf,
+		[SIUL2_PGPDI]	= nxp_siul2_regmap_pgpdi_conf,
+	};
+	const struct nxp_siul2_reg_range_info *tmp_range;
+	struct regmap_config *tmp_conf;
+	struct nxp_siul2_info *info;
+	struct nxp_siul2_mfd *priv;
+	void __iomem *reg_start;
+	int i, ret;
+
+	priv = platform_get_drvdata(pdev);
+	info = &priv->siul2[siul];
+
+	for (i = 0; i < SIUL2_NUM_REG_TYPES; i++) {
+		if (!s32g2_reg_ranges[siul][i].valid)
+			continue;
+
+		tmp_range = &s32g2_reg_ranges[siul][i];
+		tmp_conf = &regmap_configs[i];
+		tmp_conf->name = tmp_range->reg_name;
+		tmp_conf->max_register =
+			tmp_range->reg_end_offset - tmp_range->reg_start_offset;
+
+		if (tmp_conf->cache_type != REGCACHE_NONE)
+			tmp_conf->num_reg_defaults_raw =
+				tmp_conf->max_register / tmp_conf->reg_stride;
+
+		if (tmp_range->reg_access) {
+			tmp_conf->wr_table = tmp_range->reg_access;
+			tmp_conf->rd_table = tmp_range->reg_access;
+		}
+
+		reg_start = base + tmp_range->reg_start_offset;
+		info->regmaps[i] = devm_regmap_init_mmio(&pdev->dev, reg_start,
+							 tmp_conf);
+		if (IS_ERR(info->regmaps[i])) {
+			dev_err(&pdev->dev, "regmap %d init failed: %d\n", i,
+				ret);
+			return PTR_ERR(info->regmaps[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int nxp_siul2_parse_dtb(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct of_phandle_args pinspec;
+	struct nxp_siul2_mfd *priv;
+	void __iomem *base;
+	char reg_name[16];
+	int i, ret;
+
+	priv = platform_get_drvdata(pdev);
+
+	for (i = 0; i < priv->num_siul2; i++) {
+		ret = snprintf(reg_name, ARRAY_SIZE(reg_name), "siul2%d", i);
+		if (ret < 0 || ret >= ARRAY_SIZE(reg_name))
+			return ret;
+
+		base = devm_platform_ioremap_resource_byname(pdev, reg_name);
+		if (IS_ERR(base)) {
+			dev_err(&pdev->dev, "Failed to get MEM resource: %s\n",
+				reg_name);
+			return PTR_ERR(base);
+		}
+
+		ret = nxp_siul2_init_regmap(pdev, base, i);
+		if (ret)
+			return ret;
+
+		ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3,
+						       i, &pinspec);
+		if (ret)
+			return ret;
+
+		of_node_put(pinspec.np);
+
+		if (pinspec.args_count != 3) {
+			dev_err(&pdev->dev, "Invalid pinspec count: %d\n",
+				pinspec.args_count);
+			return -EINVAL;
+		}
+
+		priv->siul2[i].gpio_base = pinspec.args[1];
+		priv->siul2[i].gpio_num = pinspec.args[2];
+	}
+
+	return 0;
+}
+
+static int nxp_siul2_probe(struct platform_device *pdev)
+{
+	struct nxp_siul2_mfd *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->num_siul2 = S32G_NUM_SIUL2;
+	priv->siul2 = devm_kcalloc(&pdev->dev, priv->num_siul2,
+				   sizeof(*priv->siul2), GFP_KERNEL);
+	if (!priv->siul2)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+	ret = nxp_siul2_parse_dtb(pdev);
+	if (ret)
+		return ret;
+
+	return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+				    nxp_siul2_devs, ARRAY_SIZE(nxp_siul2_devs),
+				    NULL, 0, NULL);
+}
+
+static const struct of_device_id nxp_siul2_dt_ids[] = {
+	{ .compatible = "nxp,s32g2-siul2" },
+	{ .compatible = "nxp,s32g3-siul2" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, nxp_siul2_dt_ids);
+
+static struct platform_driver nxp_siul2_mfd_driver = {
+	.driver = {
+		.name		= "nxp-siul2-mfd",
+		.of_match_table	= nxp_siul2_dt_ids,
+	},
+	.probe = nxp_siul2_probe,
+};
+
+module_platform_driver(nxp_siul2_mfd_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("NXP SIUL2 MFD driver");
+MODULE_AUTHOR("Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>");
diff --git a/include/linux/mfd/nxp-siul2.h b/include/linux/mfd/nxp-siul2.h
new file mode 100644
index 000000000000..238c812dba29
--- /dev/null
+++ b/include/linux/mfd/nxp-siul2.h
@@ -0,0 +1,55 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * S32 SIUL2 core definitions
+ *
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DRIVERS_MFD_NXP_SIUL2_H
+#define __DRIVERS_MFD_NXP_SIUL2_H
+
+#include <linux/regmap.h>
+
+/**
+ * enum nxp_siul2_reg_type - an enum for SIUL2 reg types
+ * @SIUL2_MPIDR - SoC info
+ * @SIUL2_IRQ - IRQ related registers, only valid in SIUL2_1
+ * @SIUL2_MSCR - used for pinmuxing and pinconf
+ * @SIUL2_IMCR - used for pinmuxing
+ * @SIUL2_PGPDO - writing the GPIO value
+ * @SIUL2_PGPDI - reading the GPIO value
+ */
+enum nxp_siul2_reg_type {
+	SIUL2_MPIDR,
+	SIUL2_IRQ,
+	SIUL2_MSCR,
+	SIUL2_IMCR,
+	SIUL2_PGPDO,
+	SIUL2_PGPDI,
+
+	SIUL2_NUM_REG_TYPES
+};
+
+/**
+ * struct nxp_siul2_info - details about one SIUL2 hardware instance
+ * @regmaps: the regmaps for each register type for a SIUL2 hardware instance
+ * @gpio_base: the first GPIO in this SIUL2 module
+ * @gpio_num: the number of GPIOs in this SIUL2 module
+ */
+struct nxp_siul2_info {
+	struct regmap *regmaps[SIUL2_NUM_REG_TYPES];
+	u32 gpio_base;
+	u32 gpio_num;
+};
+
+/**
+ * struct nxp_siul2_mfd - driver data
+ * @siul2: info about the SIUL2 modules present
+ * @num_siul2: number of siul2 modules
+ */
+struct nxp_siul2_mfd {
+	struct nxp_siul2_info *siul2;
+	u8 num_siul2;
+};
+
+#endif /* __DRIVERS_MFD_NXP_SIUL2_H */