new file mode 100644
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sophgo,sg2042-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Pin Controller
+
+maintainers:
+ - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+ compatible:
+ enum:
+ - sophgo,sg2042-pinctrl
+ - sophgo,sg2044-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-cfg$':
+ type: object
+ description:
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine.
+
+ additionalProperties: false
+
+ patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ Each subnode will list the pins it needs, and how they should
+ be configured, with regard to muxer configuration, bias input
+ enable/disable, input schmitt trigger enable, drive strength
+ output enable/disable state. For configuration detail,
+ refer to https://github.com/sophgo/sophgo-doc/.
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ pinmux:
+ description: |
+ The list of GPIOs and their mux settings that properties in the
+ node apply to. This should be set using the PINMUX macro.
+
+ bias-disable: true
+
+ bias-pull-up:
+ type: boolean
+
+ bias-pull-down:
+ type: boolean
+
+ drive-strength-microamp:
+ description: typical current when output low level.
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: sophgo,sg2042-pinctrl
+ then:
+ patternProperties:
+ '-cfg$':
+ patternProperties:
+ '-pins$':
+ properties:
+ drive-strength-microamp:
+ enum: [ 5400, 8100, 10700, 13400,
+ 16100, 18800, 21400, 24100,
+ 26800, 29400, 32100, 34800,
+ 37400, 40100, 42800, 45400 ]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: sophgo,sg2044-pinctrl
+ then:
+ patternProperties:
+ '-cfg$':
+ patternProperties:
+ '-pins$':
+ properties:
+ drive-strength-microamp:
+ enum: [ 3200, 6400, 9600, 12700,
+ 15900, 19100, 22200, 25300,
+ 29500, 32700, 35900, 39000,
+ 42000, 45200, 48300, 51400]
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-sg2042.h>
+
+ pinctrl@30011000 {
+ compatible = "sophgo,sg2042-pinctrl";
+ reg = <30011000 0x1000>;
+
+ uart0_cfg: uart0-cfg {
+ uart0-pins {
+ pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+ <PINMUX(PIN_UART0_RX, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <13400>;
+ };
+ };
+ };
+
+...
new file mode 100644
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2042_H
+#define _DT_BINDINGS_PINCTRL_SG2042_H
+
+#define PINMUX(pin, mux) \
+ (((pin) & 0xffff) | (((mux) & 0xff) << 16))
+
+#define PIN_LPC_LCLK 0
+#define PIN_LPC_LFRAME 1
+#define PIN_LPC_LAD0 2
+#define PIN_LPC_LAD1 3
+#define PIN_LPC_LAD2 4
+#define PIN_LPC_LAD3 5
+#define PIN_LPC_LDRQ0 6
+#define PIN_LPC_LDRQ1 7
+#define PIN_LPC_SERIRQ 8
+#define PIN_LPC_CLKRUN 9
+#define PIN_LPC_LPME 10
+#define PIN_LPC_LPCPD 11
+#define PIN_LPC_LSMI 12
+#define PIN_PCIE0_L0_RESET 13
+#define PIN_PCIE0_L1_RESET 14
+#define PIN_PCIE0_L0_WAKEUP 15
+#define PIN_PCIE0_L1_WAKEUP 16
+#define PIN_PCIE0_L0_CLKREQ_IN 17
+#define PIN_PCIE0_L1_CLKREQ_IN 18
+#define PIN_PCIE1_L0_RESET 19
+#define PIN_PCIE1_L1_RESET 20
+#define PIN_PCIE1_L0_WAKEUP 21
+#define PIN_PCIE1_L1_WAKEUP 22
+#define PIN_PCIE1_L0_CLKREQ_IN 23
+#define PIN_PCIE1_L1_CLKREQ_IN 24
+#define PIN_SPIF0_CLK_SEL1 25
+#define PIN_SPIF0_CLK_SEL0 26
+#define PIN_SPIF0_WP 27
+#define PIN_SPIF0_HOLD 28
+#define PIN_SPIF0_SDI 29
+#define PIN_SPIF0_CS 30
+#define PIN_SPIF0_SCK 31
+#define PIN_SPIF0_SDO 32
+#define PIN_SPIF1_CLK_SEL1 33
+#define PIN_SPIF1_CLK_SEL0 34
+#define PIN_SPIF1_WP 35
+#define PIN_SPIF1_HOLD 36
+#define PIN_SPIF1_SDI 37
+#define PIN_SPIF1_CS 38
+#define PIN_SPIF1_SCK 39
+#define PIN_SPIF1_SDO 40
+#define PIN_EMMC_WP 41
+#define PIN_EMMC_CD 42
+#define PIN_EMMC_RST 43
+#define PIN_EMMC_PWR_EN 44
+#define PIN_SDIO_CD 45
+#define PIN_SDIO_WP 46
+#define PIN_SDIO_RST 47
+#define PIN_SDIO_PWR_EN 48
+#define PIN_RGMII0_TXD0 49
+#define PIN_RGMII0_TXD1 50
+#define PIN_RGMII0_TXD2 51
+#define PIN_RGMII0_TXD3 52
+#define PIN_RGMII0_TXCTRL 53
+#define PIN_RGMII0_RXD0 54
+#define PIN_RGMII0_RXD1 55
+#define PIN_RGMII0_RXD2 56
+#define PIN_RGMII0_RXD3 57
+#define PIN_RGMII0_RXCTRL 58
+#define PIN_RGMII0_TXC 59
+#define PIN_RGMII0_RXC 60
+#define PIN_RGMII0_REFCLKO 61
+#define PIN_RGMII0_IRQ 62
+#define PIN_RGMII0_MDC 63
+#define PIN_RGMII0_MDIO 64
+#define PIN_PWM0 65
+#define PIN_PWM1 66
+#define PIN_PWM2 67
+#define PIN_PWM3 68
+#define PIN_FAN0 69
+#define PIN_FAN1 70
+#define PIN_FAN2 71
+#define PIN_FAN3 72
+#define PIN_IIC0_SDA 73
+#define PIN_IIC0_SCL 74
+#define PIN_IIC1_SDA 75
+#define PIN_IIC1_SCL 76
+#define PIN_IIC2_SDA 77
+#define PIN_IIC2_SCL 78
+#define PIN_IIC3_SDA 79
+#define PIN_IIC3_SCL 80
+#define PIN_UART0_TX 81
+#define PIN_UART0_RX 82
+#define PIN_UART0_RTS 83
+#define PIN_UART0_CTS 84
+#define PIN_UART1_TX 85
+#define PIN_UART1_RX 86
+#define PIN_UART1_RTS 87
+#define PIN_UART1_CTS 88
+#define PIN_UART2_TX 89
+#define PIN_UART2_RX 90
+#define PIN_UART2_RTS 91
+#define PIN_UART2_CTS 92
+#define PIN_UART3_TX 93
+#define PIN_UART3_RX 94
+#define PIN_UART3_RTS 95
+#define PIN_UART3_CTS 96
+#define PIN_SPI0_CS0 97
+#define PIN_SPI0_CS1 98
+#define PIN_SPI0_SDI 99
+#define PIN_SPI0_SDO 100
+#define PIN_SPI0_SCK 101
+#define PIN_SPI1_CS0 102
+#define PIN_SPI1_CS1 103
+#define PIN_SPI1_SDI 104
+#define PIN_SPI1_SDO 105
+#define PIN_SPI1_SCK 106
+#define PIN_JTAG0_TDO 107
+#define PIN_JTAG0_TCK 108
+#define PIN_JTAG0_TDI 109
+#define PIN_JTAG0_TMS 110
+#define PIN_JTAG0_TRST 111
+#define PIN_JTAG0_SRST 112
+#define PIN_JTAG1_TDO 113
+#define PIN_JTAG1_TCK 114
+#define PIN_JTAG1_TDI 115
+#define PIN_JTAG1_TMS 116
+#define PIN_JTAG1_TRST 117
+#define PIN_JTAG1_SRST 118
+#define PIN_JTAG2_TDO 119
+#define PIN_JTAG2_TCK 120
+#define PIN_JTAG2_TDI 121
+#define PIN_JTAG2_TMS 122
+#define PIN_JTAG2_TRST 123
+#define PIN_JTAG2_SRST 124
+#define PIN_GPIO0 125
+#define PIN_GPIO1 126
+#define PIN_GPIO2 127
+#define PIN_GPIO3 128
+#define PIN_GPIO4 129
+#define PIN_GPIO5 130
+#define PIN_GPIO6 131
+#define PIN_GPIO7 132
+#define PIN_GPIO8 133
+#define PIN_GPIO9 134
+#define PIN_GPIO10 135
+#define PIN_GPIO11 136
+#define PIN_GPIO12 137
+#define PIN_GPIO13 138
+#define PIN_GPIO14 139
+#define PIN_GPIO15 140
+#define PIN_GPIO16 141
+#define PIN_GPIO17 142
+#define PIN_GPIO18 143
+#define PIN_GPIO19 144
+#define PIN_GPIO20 145
+#define PIN_GPIO21 146
+#define PIN_GPIO22 147
+#define PIN_GPIO23 148
+#define PIN_GPIO24 149
+#define PIN_GPIO25 150
+#define PIN_GPIO26 151
+#define PIN_GPIO27 152
+#define PIN_GPIO28 153
+#define PIN_GPIO29 154
+#define PIN_GPIO30 155
+#define PIN_GPIO31 156
+#define PIN_MODE_SEL0 157
+#define PIN_MODE_SEL1 158
+#define PIN_MODE_SEL2 159
+#define PIN_BOOT_SEL0 160
+#define PIN_BOOT_SEL1 161
+#define PIN_BOOT_SEL2 162
+#define PIN_BOOT_SEL3 163
+#define PIN_BOOT_SEL4 164
+#define PIN_BOOT_SEL5 165
+#define PIN_BOOT_SEL6 166
+#define PIN_BOOT_SEL7 167
+#define PIN_MULTI_SCKT 168
+#define PIN_SCKT_ID0 169
+#define PIN_SCKT_ID1 170
+#define PIN_PLL_CLK_IN_MAIN 171
+#define PIN_PLL_CLK_IN_DDR_L 172
+#define PIN_PLL_CLK_IN_DDR_R 173
+#define PIN_XTAL_32K 174
+#define PIN_SYS_RST 175
+#define PIN_PWR_BUTTON 176
+#define PIN_TEST_EN 177
+#define PIN_TEST_MODE_MBIST 178
+#define PIN_TEST_MODE_SCAN 179
+#define PIN_TEST_MODE_BSD 180
+#define PIN_BISR_BYP 181
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2042_H */
new file mode 100644
@@ -0,0 +1,221 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2044_H
+#define _DT_BINDINGS_PINCTRL_SG2044_H
+
+#define PINMUX(pin, mux) \
+ (((pin) & 0xffff) | (((mux) & 0xff) << 16))
+
+#define PIN_IIC0_SMBSUS_IN 0
+#define PIN_IIC0_SMBSUS_OUT 1
+#define PIN_IIC0_SMBALERT 2
+#define PIN_IIC1_SMBSUS_IN 3
+#define PIN_IIC1_SMBSUS_OUT 4
+#define PIN_IIC1_SMBALERT 5
+#define PIN_IIC2_SMBSUS_IN 6
+#define PIN_IIC2_SMBSUS_OUT 7
+#define PIN_IIC2_SMBALERT 8
+#define PIN_IIC3_SMBSUS_IN 9
+#define PIN_IIC3_SMBSUS_OUT 10
+#define PIN_IIC3_SMBALERT 11
+#define PIN_PCIE0_L0_RESET 12
+#define PIN_PCIE0_L1_RESET 13
+#define PIN_PCIE0_L0_WAKEUP 14
+#define PIN_PCIE0_L1_WAKEUP 15
+#define PIN_PCIE0_L0_CLKREQ_IN 16
+#define PIN_PCIE0_L1_CLKREQ_IN 17
+#define PIN_PCIE1_L0_RESET 18
+#define PIN_PCIE1_L1_RESET 19
+#define PIN_PCIE1_L0_WAKEUP 20
+#define PIN_PCIE1_L1_WAKEUP 21
+#define PIN_PCIE1_L0_CLKREQ_IN 22
+#define PIN_PCIE1_L1_CLKREQ_IN 23
+#define PIN_PCIE2_L0_RESET 24
+#define PIN_PCIE2_L1_RESET 25
+#define PIN_PCIE2_L0_WAKEUP 26
+#define PIN_PCIE2_L1_WAKEUP 27
+#define PIN_PCIE2_L0_CLKREQ_IN 28
+#define PIN_PCIE2_L1_CLKREQ_IN 29
+#define PIN_PCIE3_L0_RESET 30
+#define PIN_PCIE3_L1_RESET 31
+#define PIN_PCIE3_L0_WAKEUP 32
+#define PIN_PCIE3_L1_WAKEUP 33
+#define PIN_PCIE3_L0_CLKREQ_IN 34
+#define PIN_PCIE3_L1_CLKREQ_IN 35
+#define PIN_PCIE4_L0_RESET 36
+#define PIN_PCIE4_L1_RESET 37
+#define PIN_PCIE4_L0_WAKEUP 38
+#define PIN_PCIE4_L1_WAKEUP 39
+#define PIN_PCIE4_L0_CLKREQ_IN 40
+#define PIN_PCIE4_L1_CLKREQ_IN 41
+#define PIN_SPIF0_CLK_SEL1 42
+#define PIN_SPIF0_CLK_SEL0 43
+#define PIN_SPIF0_WP 44
+#define PIN_SPIF0_HOLD 45
+#define PIN_SPIF0_SDI 46
+#define PIN_SPIF0_CS 47
+#define PIN_SPIF0_SCK 48
+#define PIN_SPIF0_SDO 49
+#define PIN_SPIF1_CLK_SEL1 50
+#define PIN_SPIF1_CLK_SEL0 51
+#define PIN_SPIF1_WP 52
+#define PIN_SPIF1_HOLD 53
+#define PIN_SPIF1_SDI 54
+#define PIN_SPIF1_CS 55
+#define PIN_SPIF1_SCK 56
+#define PIN_SPIF1_SDO 57
+#define PIN_EMMC_WP 58
+#define PIN_EMMC_CD 59
+#define PIN_EMMC_RST 60
+#define PIN_EMMC_PWR_EN 61
+#define PIN_SDIO_CD 62
+#define PIN_SDIO_WP 63
+#define PIN_SDIO_RST 64
+#define PIN_SDIO_PWR_EN 65
+#define PIN_RGMII0_TXD0 66
+#define PIN_RGMII0_TXD1 67
+#define PIN_RGMII0_TXD2 68
+#define PIN_RGMII0_TXD3 69
+#define PIN_RGMII0_TXCTRL 70
+#define PIN_RGMII0_RXD0 71
+#define PIN_RGMII0_RXD1 72
+#define PIN_RGMII0_RXD2 73
+#define PIN_RGMII0_RXD3 74
+#define PIN_RGMII0_RXCTRL 75
+#define PIN_RGMII0_TXC 76
+#define PIN_RGMII0_RXC 77
+#define PIN_RGMII0_REFCLKO 78
+#define PIN_RGMII0_IRQ 79
+#define PIN_RGMII0_MDC 80
+#define PIN_RGMII0_MDIO 81
+#define PIN_PWM0 82
+#define PIN_PWM1 83
+#define PIN_PWM2 84
+#define PIN_PWM3 85
+#define PIN_FAN0 86
+#define PIN_FAN1 87
+#define PIN_FAN2 88
+#define PIN_FAN3 89
+#define PIN_IIC0_SDA 90
+#define PIN_IIC0_SCL 91
+#define PIN_IIC1_SDA 92
+#define PIN_IIC1_SCL 93
+#define PIN_IIC2_SDA 94
+#define PIN_IIC2_SCL 95
+#define PIN_IIC3_SDA 96
+#define PIN_IIC3_SCL 97
+#define PIN_UART0_TX 98
+#define PIN_UART0_RX 99
+#define PIN_UART0_RTS 100
+#define PIN_UART0_CTS 101
+#define PIN_UART1_TX 102
+#define PIN_UART1_RX 103
+#define PIN_UART1_RTS 104
+#define PIN_UART1_CTS 105
+#define PIN_UART2_TX 106
+#define PIN_UART2_RX 107
+#define PIN_UART2_RTS 108
+#define PIN_UART2_CTS 109
+#define PIN_UART3_TX 110
+#define PIN_UART3_RX 111
+#define PIN_UART3_RTS 112
+#define PIN_UART3_CTS 113
+#define PIN_SPI0_CS0 114
+#define PIN_SPI0_CS1 115
+#define PIN_SPI0_SDI 116
+#define PIN_SPI0_SDO 117
+#define PIN_SPI0_SCK 118
+#define PIN_SPI1_CS0 119
+#define PIN_SPI1_CS1 120
+#define PIN_SPI1_SDI 121
+#define PIN_SPI1_SDO 122
+#define PIN_SPI1_SCK 123
+#define PIN_JTAG0_TDO 124
+#define PIN_JTAG0_TCK 125
+#define PIN_JTAG0_TDI 126
+#define PIN_JTAG0_TMS 127
+#define PIN_JTAG0_TRST 128
+#define PIN_JTAG0_SRST 129
+#define PIN_JTAG1_TDO 130
+#define PIN_JTAG1_TCK 131
+#define PIN_JTAG1_TDI 132
+#define PIN_JTAG1_TMS 133
+#define PIN_JTAG1_TRST 134
+#define PIN_JTAG1_SRST 135
+#define PIN_JTAG2_TDO 136
+#define PIN_JTAG2_TCK 137
+#define PIN_JTAG2_TDI 138
+#define PIN_JTAG2_TMS 139
+#define PIN_JTAG2_TRST 140
+#define PIN_JTAG2_SRST 141
+#define PIN_JTAG3_TDO 142
+#define PIN_JTAG3_TCK 143
+#define PIN_JTAG3_TDI 144
+#define PIN_JTAG3_TMS 145
+#define PIN_JTAG3_TRST 146
+#define PIN_JTAG3_SRST 147
+#define PIN_GPIO0 148
+#define PIN_GPIO1 149
+#define PIN_GPIO2 150
+#define PIN_GPIO3 151
+#define PIN_GPIO4 152
+#define PIN_GPIO5 153
+#define PIN_GPIO6 154
+#define PIN_GPIO7 155
+#define PIN_GPIO8 156
+#define PIN_GPIO9 157
+#define PIN_GPIO10 158
+#define PIN_GPIO11 159
+#define PIN_GPIO12 160
+#define PIN_GPIO13 161
+#define PIN_GPIO14 162
+#define PIN_GPIO15 163
+#define PIN_GPIO16 164
+#define PIN_GPIO17 165
+#define PIN_GPIO18 166
+#define PIN_GPIO19 167
+#define PIN_GPIO20 168
+#define PIN_GPIO21 169
+#define PIN_GPIO22 170
+#define PIN_GPIO23 171
+#define PIN_GPIO24 172
+#define PIN_GPIO25 173
+#define PIN_GPIO26 174
+#define PIN_GPIO27 175
+#define PIN_GPIO28 176
+#define PIN_GPIO29 177
+#define PIN_GPIO30 178
+#define PIN_GPIO31 179
+#define PIN_MODE_SEL0 180
+#define PIN_MODE_SEL1 181
+#define PIN_MODE_SEL2 182
+#define PIN_BOOT_SEL0 183
+#define PIN_BOOT_SEL1 184
+#define PIN_BOOT_SEL2 185
+#define PIN_BOOT_SEL3 186
+#define PIN_BOOT_SEL4 187
+#define PIN_BOOT_SEL5 188
+#define PIN_BOOT_SEL6 189
+#define PIN_BOOT_SEL7 190
+#define PIN_MULTI_SCKT 191
+#define PIN_SCKT_ID0 192
+#define PIN_SCKT_ID1 193
+#define PIN_PLL_CLK_IN_MAIN 194
+#define PIN_PLL_CLK_IN_DDR_0 195
+#define PIN_PLL_CLK_IN_DDR_1 196
+#define PIN_PLL_CLK_IN_DDR_2 197
+#define PIN_PLL_CLK_IN_DDR_3 198
+#define PIN_XTAL_32K 199
+#define PIN_SYS_RST 200
+#define PIN_PWR_BUTTON 201
+#define PIN_TEST_EN 202
+#define PIN_TEST_MODE_MBIST 203
+#define PIN_TEST_MODE_SCAN 204
+#define PIN_TEST_MODE_BSD 205
+#define PIN_BISR_BYP 206
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2044_H */
SG2042 introduces a simple pinctrl device for all configurable pins. For the SG2042 pinctl register file, each register (32 bits) is responsible for two pins, each occupying the upper 16 bits and lower 16 bits of the register. It supports setting pull up/down, drive strength and input schmitt trigger. Add support for SG2042 pinctrl device. Signed-off-by: Inochi Amaoto <inochiama@gmail.com> --- .../pinctrl/sophgo,sg2042-pinctrl.yaml | 129 ++++++++++ include/dt-bindings/pinctrl/pinctrl-sg2042.h | 196 ++++++++++++++++ include/dt-bindings/pinctrl/pinctrl-sg2044.h | 221 ++++++++++++++++++ 3 files changed, 546 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/sophgo,sg2042-pinctrl.yaml create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2042.h create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2044.h