[v2,6/8] dt-bindings: pinctrl: add compatible for Allwinner A523/T527

diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun55i-a523-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun55i-a523-pinctrl.yaml
new file mode 100644
index 0000000000000..1de6ccaefc1ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun55i-a523-pinctrl.yaml
@@ -0,0 +1,177 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/allwinner,sun55i-a523-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A523 Pin Controller
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  "#gpio-cells":
+    const: 3
+    description:
+      GPIO consumers must use three arguments, first the number of the
+      bank, then the pin number inside that bank, and finally the GPIO
+      flags.
+
+  "#interrupt-cells":
+    const: 3
+    description:
+      Interrupts consumers must use three arguments, first the number
+      of the bank, then the pin number inside that bank, and finally
+      the interrupts flags.
+
+  compatible:
+    enum:
+      - allwinner,sun55i-a523-pinctrl
+      - allwinner,sun55i-a523-r-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 10
+    description:
+      One interrupt per external interrupt bank supported on the
+      controller, sorted by bank number ascending order.
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+      - description: Low Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: apb
+      - const: hosc
+      - const: losc
+
+  gpio-controller: true
+  interrupt-controller: true
+  gpio-line-names: true
+
+  input-debounce:
+    description:
+      Debouncing periods in microseconds, one period per interrupt
+      bank found in the controller
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 10
+
+patternProperties:
+  # It's pretty scary, but the basic idea is that:
+  #   - One node name can start with either s- or r- for PRCM nodes,
+  #   - Then, the name itself can be any repetition of <string>- (to
+  #     accommodate with nodes like uart4-rts-cts-pins), where each
+  #     string can be either starting with 'p' but in a string longer
+  #     than 3, or something that doesn't start with 'p',
+  #   - Then, the bank name is optional and will be between pa and pm.
+  #     Some pins groups that have several options will have the pin
+  #     numbers then,
+  #   - Finally, the name will end with either -pin or pins.
+
+  "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-m][0-9]*?-)??pins?$":
+    type: object
+
+    properties:
+      pins: true
+      function: true
+      bias-disable: true
+      bias-pull-up: true
+      bias-pull-down: true
+
+      drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [10, 20, 30, 40]
+
+      allwinner,pinmux:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          Pinmux selector value, for each pin. Almost every time this value
+          is the same for all pins, so any array shorter than the number of
+          pins will repeat the last value, to allow just specifying a single
+          cell, for all cells.
+
+    required:
+      - pins
+      - allwinner,pinmux
+      - function
+
+    additionalProperties: false
+
+  "^vcc-p[a-m]-supply$":
+    description:
+      Power supplies for pin banks.
+
+required:
+  - "#gpio-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-controller
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 10
+          maxItems: 10
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-r-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+
+    r_pio: pinctrl@7022000 {
+        compatible = "allwinner,sun55i-a523-r-pinctrl";
+        reg = <0x7022000 0x800>;
+        interrupts = <0 159 4>, <0 161 4>;
+        clocks = <&r_ccu CLK_R_APB0>, <&osc24M>, <&osc32k>;
+        clock-names = "apb", "hosc", "losc";
+        gpio-controller;
+        #gpio-cells = <3>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+
+        r_i2c_pins: r-i2c-pins {
+            pins = "PL0", "PL1";
+            allwinner,pinmux = <2>;
+            function = "r_i2c0";
+            bias-pull-up;
+        };
+
+        r_spi_pins: r-spi-pins {
+            pins = "PL11" ,"PL12", "PL13";
+            allwinner,pinmux = <6>;
+            function = "r_spi";
+        };
+    };