mbox series

[00/15] i2c: use 'time_left' with wait_for_*

Message ID 20240427203611.3750-1-wsa+renesas@sang-engineering.com
Headers show
Series i2c: use 'time_left' with wait_for_* | expand

Message

Wolfram Sang April 27, 2024, 8:35 p.m. UTC
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_*() causing patterns like:

        timeout = wait_for_completion_timeout(...)
        if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

This is the I2C part of a tree-wide series. The rest of the patches can
be found here (slightly WIP):

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left

Because these patches are generated, they need manual audit. So, I will
send them step by step. This is part 1 and also a call for opinions if
this is a desirable change. But at least in the I2C realm, I really want
to have it proper.

Build bot is happy with these patches and I also compile tested them
(except two). No functional changes intended.

Wolfram Sang (15):
  i2c: amd-mp2-plat: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: digicolor: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: exynos5: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: hix5hd2: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: imx-lpi2c: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
  i2c: st: use 'time_left' variable with wait_for_completion_timeout()
  i2c: stm32f4: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: stm32f7: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: synquacer: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: jz4780: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: qcom-geni: use 'time_left' variable with
    wait_for_completion_timeout()
  i2c: rk3x: use 'time_left' variable with wait_event_timeout()
  i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
  i2c: pxa: use 'time_left' variable with wait_event_timeout()

Comments

Andi Shyti May 2, 2024, 11:29 a.m. UTC | #1
Hi Wolfram,

On Sat, Apr 27, 2024 at 10:35:52PM +0200, Wolfram Sang wrote:
> There is a confusing pattern in the kernel to use a variable named 'timeout' to

there was a little checkpatch warning here for the line being
over 75 characters, but I went ahead anyway and pushed the whole
series to i2c/i2c-host.

Thanks,
Andi

> store the result of wait_for_*() causing patterns like:
> 
>         timeout = wait_for_completion_timeout(...)
>         if (!timeout) return -ETIMEDOUT;
> 
> with all kinds of permutations. Use 'time_left' as a variable to make the code
> self explaining.
> 
> This is the I2C part of a tree-wide series. The rest of the patches can
> be found here (slightly WIP):
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left
> 
> Because these patches are generated, they need manual audit. So, I will
> send them step by step. This is part 1 and also a call for opinions if
> this is a desirable change. But at least in the I2C realm, I really want
> to have it proper.
> 
> Build bot is happy with these patches and I also compile tested them
> (except two). No functional changes intended.
> 
> Wolfram Sang (15):
>   i2c: amd-mp2-plat: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: digicolor: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: exynos5: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: hix5hd2: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: imx-lpi2c: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
>   i2c: st: use 'time_left' variable with wait_for_completion_timeout()
>   i2c: stm32f4: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: stm32f7: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: synquacer: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: jz4780: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: qcom-geni: use 'time_left' variable with
>     wait_for_completion_timeout()
>   i2c: rk3x: use 'time_left' variable with wait_event_timeout()
>   i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
>   i2c: pxa: use 'time_left' variable with wait_event_timeout()
> 
> -- 
> 2.43.0
>