mbox series

[v3,0/4] drm/xe: i2c support

Message ID 20250612132450.3293248-1-heikki.krogerus@linux.intel.com
Headers show
Series drm/xe: i2c support | expand

Message

Heikki Krogerus June 12, 2025, 1:24 p.m. UTC 
Hi,

Changed since v2:
- Added dependency on regmap when i2c is enabled.

Changed since v1:
- Now rebased on top of drm-tip.
- No longer ignoring errors from xe_i2c_probe().
- Cleanups pointed out by Lucas.

I've also included followup patches from Raag and Riana to this
series.

Original cover letter:

Some of the future GPUs will provide access to the on-board Synopsys
DesignWare I2C host adapter. The i2c is used to connect various
microcontrollers. The initially supported microcontroller unit is
called Add-In Management Controller (AMC).

Thanks,

Heikki Krogerus (2):
  i2c: designware: Add quirk for Intel Xe
  drm/xe: Support for I2C attached MCUs

Raag Jadav (1):
  drm/xe/pm: Wire up suspend/resume for I2C controller

Riana Tauro (1):
  drm/xe/xe_i2c: Add support for i2c in survivability mode

 drivers/gpu/drm/xe/Kconfig                  |   1 +
 drivers/gpu/drm/xe/Makefile                 |   1 +
 drivers/gpu/drm/xe/regs/xe_i2c_regs.h       |  20 ++
 drivers/gpu/drm/xe/regs/xe_irq_regs.h       |   1 +
 drivers/gpu/drm/xe/regs/xe_pmt.h            |   2 +-
 drivers/gpu/drm/xe/regs/xe_regs.h           |   2 +
 drivers/gpu/drm/xe/xe_device.c              |   5 +
 drivers/gpu/drm/xe/xe_device_types.h        |   4 +
 drivers/gpu/drm/xe/xe_i2c.c                 | 299 ++++++++++++++++++++
 drivers/gpu/drm/xe/xe_i2c.h                 |  62 ++++
 drivers/gpu/drm/xe/xe_irq.c                 |   2 +
 drivers/gpu/drm/xe/xe_pm.c                  |   9 +
 drivers/gpu/drm/xe/xe_survivability_mode.c  |  23 +-
 drivers/i2c/busses/i2c-designware-platdrv.c |  18 +-
 14 files changed, 434 insertions(+), 15 deletions(-)
 create mode 100644 drivers/gpu/drm/xe/regs/xe_i2c_regs.h
 create mode 100644 drivers/gpu/drm/xe/xe_i2c.c
 create mode 100644 drivers/gpu/drm/xe/xe_i2c.h