diff mbox series

[v1,03/12] i2c: tegra: Clean up messages in the code

Message ID 20200831202303.15391-4-digetx@gmail.com
State New
Headers show
Series Improvements for Tegra I2C driver | expand

Commit Message

Dmitry Osipenko Aug. 31, 2020, 8:22 p.m. UTC
Use lowercase and consistent wording for all messages in the code.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/i2c/busses/i2c-tegra.c | 50 ++++++++++++++++------------------
 1 file changed, 24 insertions(+), 26 deletions(-)

Comments

Michał Mirosław Sept. 2, 2020, 8:42 p.m. UTC | #1
On Mon, Aug 31, 2020 at 11:22:54PM +0300, Dmitry Osipenko wrote:
> Use lowercase and consistent wording for all messages in the code.
> 
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/i2c/busses/i2c-tegra.c | 50 ++++++++++++++++------------------
>  1 file changed, 24 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 9bd91b6f32f4..efbb20049cf8 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -427,7 +427,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
>  		return 0;
>  
>  	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
> -		dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n");
> +		dev_dbg(i2c_dev->dev, "dma support not enabled\n");
>  		return 0;
[...]

DMA is an acronym and so I would usually write it in uppercase for grammatical
correctness unless in a function's name.

Best Regards,
Michał Mirosław
Dmitry Osipenko Sept. 2, 2020, 9:16 p.m. UTC | #2
02.09.2020 23:42, Michał Mirosław пишет:
> On Mon, Aug 31, 2020 at 11:22:54PM +0300, Dmitry Osipenko wrote:
>> Use lowercase and consistent wording for all messages in the code.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>  drivers/i2c/busses/i2c-tegra.c | 50 ++++++++++++++++------------------
>>  1 file changed, 24 insertions(+), 26 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
>> index 9bd91b6f32f4..efbb20049cf8 100644
>> --- a/drivers/i2c/busses/i2c-tegra.c
>> +++ b/drivers/i2c/busses/i2c-tegra.c
>> @@ -427,7 +427,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
>>  		return 0;
>>  
>>  	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
>> -		dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n");
>> +		dev_dbg(i2c_dev->dev, "dma support not enabled\n");
>>  		return 0;
> [...]
> 
> DMA is an acronym and so I would usually write it in uppercase for grammatical
> correctness unless in a function's name.

Andy Shevchenko suggested the same thing in other reply, I'll change it
in v3. Thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9bd91b6f32f4..efbb20049cf8 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -427,7 +427,7 @@  static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 		return 0;
 
 	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
-		dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n");
+		dev_dbg(i2c_dev->dev, "dma support not enabled\n");
 		return 0;
 	}
 
@@ -450,7 +450,7 @@  static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
 				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
 	if (!dma_buf) {
-		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
+		dev_err(i2c_dev->dev, "failed to allocate dma buffer\n");
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -672,8 +672,7 @@  static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
 
 	ret = clk_enable(i2c_dev->fast_clk);
 	if (ret < 0) {
-		dev_err(i2c_dev->dev,
-			"Enabling fast clk failed, err %d\n", ret);
+		dev_err(dev, "failed to enable fast clock: %d\n", ret);
 		return ret;
 	}
 
@@ -685,8 +684,7 @@  static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
 
 	ret = clk_enable(i2c_dev->div_clk);
 	if (ret < 0) {
-		dev_err(i2c_dev->dev,
-			"Enabling div clk failed, err %d\n", ret);
+		dev_err(dev, "failed to enable div clock: %d\n", ret);
 		goto disable_slow_clk;
 	}
 
@@ -850,7 +848,7 @@  static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 				   i2c_dev->bus_clk_rate * clk_multiplier);
 		if (err) {
 			dev_err(i2c_dev->dev,
-				"failed changing clock rate: %d\n", err);
+				"failed to set div-clk rate: %d\n", err);
 			return err;
 		}
 	}
@@ -1052,7 +1050,7 @@  static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 		slv_config.device_fc = true;
 		ret = dmaengine_slave_config(chan, &slv_config);
 		if (ret < 0) {
-			dev_err(i2c_dev->dev, "DMA slave config failed: %d\n",
+			dev_err(i2c_dev->dev, "dma slave config failed: %d\n",
 				ret);
 			dev_err(i2c_dev->dev, "falling back to PIO\n");
 			tegra_i2c_release_dma(i2c_dev);
@@ -1163,8 +1161,7 @@  static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 
 	reg = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
 	if (!(reg & I2C_BC_STATUS)) {
-		dev_err(i2c_dev->dev,
-			"un-recovered arbitration lost\n");
+		dev_err(i2c_dev->dev, "un-recovered arbitration lost\n");
 		return -EIO;
 	}
 
@@ -1221,8 +1218,7 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
 			if (err < 0) {
 				dev_err(i2c_dev->dev,
-					"starting RX DMA failed, err %d\n",
-					err);
+					"starting rx dma failed: %d\n", err);
 				return err;
 			}
 
@@ -1281,8 +1277,7 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
 			if (err < 0) {
 				dev_err(i2c_dev->dev,
-					"starting TX DMA failed, err %d\n",
-					err);
+					"starting tx dma failed: %d\n", err);
 				return err;
 			}
 		} else {
@@ -1321,7 +1316,7 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 					 i2c_dev->tx_dma_chan);
 
 		if (!time_left && !completion_done(&i2c_dev->dma_complete)) {
-			dev_err(i2c_dev->dev, "DMA transfer timeout\n");
+			dev_err(i2c_dev->dev, "dma transfer timeout\n");
 			tegra_i2c_init(i2c_dev, true);
 			return -ETIMEDOUT;
 		}
@@ -1676,7 +1671,7 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
-		dev_err(&pdev->dev, "no irq resource\n");
+		dev_err(dev, "no irq resource\n");
 		return -EINVAL;
 	}
 	irq = res->start;
@@ -1705,7 +1700,9 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->rst = devm_reset_control_get_exclusive(&pdev->dev, "i2c");
 	if (IS_ERR(i2c_dev->rst)) {
-		dev_err(&pdev->dev, "missing controller reset\n");
+		dev_err(dev, "failed to get controller reset: %pe\n",
+			i2c_dev->rst);
+
 		return PTR_ERR(i2c_dev->rst);
 	}
 
@@ -1725,7 +1722,9 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 	if (!i2c_dev->hw->has_single_clk_source) {
 		fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
 		if (IS_ERR(fast_clk)) {
-			dev_err(&pdev->dev, "missing fast clock\n");
+			dev_err(dev, "failed to get fast clock\n: %ld\n",
+				PTR_ERR(fast_clk));
+
 			return PTR_ERR(fast_clk);
 		}
 		i2c_dev->fast_clk = fast_clk;
@@ -1746,7 +1745,7 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 
 	ret = clk_prepare(i2c_dev->fast_clk);
 	if (ret < 0) {
-		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+		dev_err(dev, "failed to prepare fast clock: %d\n", ret);
 		return ret;
 	}
 
@@ -1770,7 +1769,7 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 
 	ret = clk_prepare(i2c_dev->div_clk);
 	if (ret < 0) {
-		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+		dev_err(dev, "failed to prepare div-clk: %d\n", ret);
 		goto unprepare_slow_clk;
 	}
 
@@ -1787,13 +1786,13 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 	if (!pm_runtime_enabled(&pdev->dev)) {
 		ret = tegra_i2c_runtime_resume(&pdev->dev);
 		if (ret < 0) {
-			dev_err(&pdev->dev, "runtime resume failed\n");
+			dev_err(dev, "runtime resume failed\n");
 			goto unprepare_div_clk;
 		}
 	} else {
 		ret = pm_runtime_get_sync(i2c_dev->dev);
 		if (ret < 0) {
-			dev_err(&pdev->dev, "runtime resume failed\n");
+			dev_err(dev, "runtime resume failed\n");
 			goto disable_rpm;
 		}
 	}
@@ -1801,8 +1800,7 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 	if (i2c_dev->is_multimaster_mode) {
 		ret = clk_enable(i2c_dev->div_clk);
 		if (ret < 0) {
-			dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
-				ret);
+			dev_err(dev, "failed to enable div-clk: %d\n", ret);
 			goto put_rpm;
 		}
 	}
@@ -1816,7 +1814,7 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 
 	ret = tegra_i2c_init(i2c_dev, false);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
+		dev_err(dev, "failed to initialize i2c controller\n");
 		goto release_dma;
 	}
 
@@ -1825,7 +1823,7 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 	ret = devm_request_irq(&pdev->dev, i2c_dev->irq, tegra_i2c_isr,
 			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c_dev);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
+		dev_err(dev, "failed to request irq %i\n", i2c_dev->irq);
 		goto release_dma;
 	}