@@ -250,7 +250,6 @@ struct tegra_i2c_hw_feature {
* @msg_buf_remaining: size of unsent data in the message buffer
* @msg_read: identifies read transfers
* @bus_clk_rate: current I2C bus clock rate
- * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
* @is_multimaster_mode: track if I2C controller is in multi-master mode
* @tx_dma_chan: DMA transmit channel
* @rx_dma_chan: DMA receive channel
@@ -281,7 +280,6 @@ struct tegra_i2c_dev {
size_t msg_buf_remaining;
int msg_read;
u32 bus_clk_rate;
- u16 clk_divisor_non_hs_mode;
bool is_multimaster_mode;
struct dma_chan *tx_dma_chan;
struct dma_chan *rx_dma_chan;
@@ -783,6 +781,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
u32 val;
int err;
u32 clk_divisor, clk_multiplier;
+ u32 non_hs_mode;
u32 tsu_thd;
u8 tlow, thigh;
@@ -805,24 +804,32 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (i2c_dev->is_vi)
tegra_i2c_vi_init(i2c_dev);
- /* Make sure clock divisor programmed correctly */
- clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
- i2c_dev->hw->clk_divisor_hs_mode) |
- FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE,
- i2c_dev->clk_divisor_non_hs_mode);
- i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
-
- if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
- i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ) {
+ switch (i2c_dev->bus_clk_rate) {
+ case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:
tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
- } else {
+
+ if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ)
+ non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;
+ else
+ non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
+ break;
+
+ default:
tlow = i2c_dev->hw->tlow_std_mode;
thigh = i2c_dev->hw->thigh_std_mode;
tsu_thd = i2c_dev->hw->setup_hold_time_std_mode;
+ non_hs_mode = i2c_dev->hw->clk_divisor_std_mode;
+ break;
}
+ /* Make sure clock divisor programmed correctly */
+ clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
+ i2c_dev->hw->clk_divisor_hs_mode) |
+ FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE, non_hs_mode);
+ i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
+
if (i2c_dev->hw->has_interface_timing_reg) {
val = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, thigh) |
FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, tlow);
@@ -837,7 +844,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
clk_multiplier = tlow + thigh + 2;
- clk_multiplier *= i2c_dev->clk_divisor_non_hs_mode + 1;
+ clk_multiplier *= non_hs_mode + 1;
err = clk_set_rate(i2c_dev->div_clk,
i2c_dev->bus_clk_rate * clk_multiplier);
@@ -1748,18 +1755,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto unprepare_fast_clk;
}
- if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
- i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ)
- i2c_dev->clk_divisor_non_hs_mode =
- i2c_dev->hw->clk_divisor_fast_plus_mode;
- else if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
- i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
- i2c_dev->clk_divisor_non_hs_mode =
- i2c_dev->hw->clk_divisor_fast_mode;
- else
- i2c_dev->clk_divisor_non_hs_mode =
- i2c_dev->hw->clk_divisor_std_mode;
-
ret = clk_prepare(i2c_dev->div_clk);
if (ret < 0) {
dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
The "non_hs_mode" divisor value is fixed, thus there is no need to have the variable i2c_dev.clk_divisor_non_hs_mode struct member. Let's remove it and move the mode selection into tegra_i2c_init() where it can be united with the timing selection. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/i2c/busses/i2c-tegra.c | 45 +++++++++++++++------------------- 1 file changed, 20 insertions(+), 25 deletions(-)