Message ID | 20211201190455.31646-4-semen.protsenko@linaro.org |
---|---|
State | New |
Headers | show |
Series | i2c: exynos5: Add support for modern Exynos SoCs | expand |
On 01/12/2021 20:04, Sam Protsenko wrote: > In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a > part of USIv2 block, there are two clocks provided to HSI2C controller: > - PCLK: bus clock (APB), provides access to register interface > - IPCLK: operating IP-core clock; SCL is derived from this one > > Both clocks have to be asserted for HSI2C to be functional in that case. > > Modify bindings doc to allow specifying bus clock in addition to > already described operating clock. Make it optional though, as older > Exynos SoC variants only have one HSI2C clock. I understand that it is required on newer SoCs, so you need "if:" adding it to required properties on Autov8 or 850. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > .../devicetree/bindings/i2c/i2c-exynos5.yaml | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml > index db20e703dea0..a212c1d5e7d9 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml > +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml > @@ -49,11 +49,16 @@ properties: > clock-frequency is >= 1MHz. > > clocks: > - maxItems: 1 > - description: I2C operating clock > + minItems: 1 > + items: > + - description: I2C operating clock > + - description: Bus clock (APB) > > clock-names: > - const: hsi2c > + minItems: 1 > + items: > + - const: hsi2c > + - const: hsi2c_pclk > > required: > - compatible > Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml index db20e703dea0..a212c1d5e7d9 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml @@ -49,11 +49,16 @@ properties: clock-frequency is >= 1MHz. clocks: - maxItems: 1 - description: I2C operating clock + minItems: 1 + items: + - description: I2C operating clock + - description: Bus clock (APB) clock-names: - const: hsi2c + minItems: 1 + items: + - const: hsi2c + - const: hsi2c_pclk required: - compatible
In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a part of USIv2 block, there are two clocks provided to HSI2C controller: - PCLK: bus clock (APB), provides access to register interface - IPCLK: operating IP-core clock; SCL is derived from this one Both clocks have to be asserted for HSI2C to be functional in that case. Modify bindings doc to allow specifying bus clock in addition to already described operating clock. Make it optional though, as older Exynos SoC variants only have one HSI2C clock. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- .../devicetree/bindings/i2c/i2c-exynos5.yaml | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)