From patchwork Wed Dec 15 15:12:00 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jarkko Nikula X-Patchwork-Id: 525634 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1A2F4C433EF for ; Wed, 15 Dec 2021 15:12:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243802AbhLOPMM (ORCPT ); Wed, 15 Dec 2021 10:12:12 -0500 Received: from mga18.intel.com ([134.134.136.126]:62944 "EHLO mga18.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243787AbhLOPMK (ORCPT ); Wed, 15 Dec 2021 10:12:10 -0500 X-IronPort-AV: E=McAfee;i="6200,9189,10198"; a="226104855" X-IronPort-AV: E=Sophos;i="5.88,207,1635231600"; d="scan'208";a="226104855" Received: from orsmga008.jf.intel.com ([10.7.209.65]) by orsmga106.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 15 Dec 2021 07:12:10 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.88,207,1635231600"; d="scan'208";a="518801165" Received: from mylly.fi.intel.com (HELO mylly.fi.intel.com.) ([10.237.72.88]) by orsmga008.jf.intel.com with ESMTP; 15 Dec 2021 07:12:08 -0800 From: Jarkko Nikula To: linux-i2c@vger.kernel.org Cc: Wolfram Sang , Andy Shevchenko , Mika Westerberg , Tamal Saha , Jarkko Nikula Subject: [PATCH 1/6] i2c: designware: Do not complete i2c read without RX_FULL interrupt Date: Wed, 15 Dec 2021 17:12:00 +0200 Message-Id: <20211215151205.584264-1-jarkko.nikula@linux.intel.com> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org From: Tamal Saha Intel Keem Bay platform supports multi-master operations over same i2c bus using Synopsys i2c DesignWare IP. When multi-masters initiate i2c operation simultaneously in a loop, SCL line is stucked low forever after few i2c operations. Following interrupt sequences are observed in: working case: TX_EMPTY, RX_FULL and STOP_DET non working case: TX_EMPTY, STOP_DET, RX_FULL. DW_apb_i2c stretches the SCL line when the TX FIFO is empty or when RX FIFO is full. The DW_apb_i2c master will continue to hold the SCL line LOW until RX FIFO is read. Linux kernel i2c DesignWare driver does not handle above non working sequence. TX_EMPTY, RX_FULL and STOP_DET routine execution are required in sequence although RX_FULL interrupt is raised after STOP_DET by hardware. Clear STOP_DET for the following conditions: (STOP_DET ,RX_FULL, rx_outstanding) Write Operation: (1, 0, 0) Read Operation: RX_FULL followed by STOP_DET: (0, 1, 1) -> (1, 0, 0) STOP_DET followed by RX_FULL: (1, 0, 1) -> (1, 1, 0) RX_FULL and STOP_DET together: (1, 1, 1) Signed-off-by: Tamal Saha Signed-off-by: Jarkko Nikula --- drivers/i2c/busses/i2c-designware-master.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 9b08bb5df38d..9177463c2cbb 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -701,7 +701,8 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy); if (stat & DW_IC_INTR_ACTIVITY) regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy); - if (stat & DW_IC_INTR_STOP_DET) + if ((stat & DW_IC_INTR_STOP_DET) && + ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL))) regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy); if (stat & DW_IC_INTR_START_DET) regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy); @@ -723,6 +724,7 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev) if (stat & DW_IC_INTR_TX_ABRT) { dev->cmd_err |= DW_IC_ERR_TX_ABRT; dev->status = STATUS_IDLE; + dev->rx_outstanding = 0; /* * Anytime TX_ABRT is set, the contents of the tx/rx @@ -745,7 +747,8 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev) */ tx_aborted: - if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) + if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) && + (dev->rx_outstanding == 0)) complete(&dev->cmd_complete); else if (unlikely(dev->flags & ACCESS_INTR_MASK)) { /* Workaround to trigger pending interrupt */