| Message ID | 20231018210805.1569987-2-chris.packham@alliedtelesis.co.nz |
|---|---|
| State | Superseded |
| Headers | show |
| Series | i2c: mv64xxx: reset-gpios | expand |
On 18/10/2023 23:08, Chris Packham wrote: > Add reset-gpios and reset-duration-us properties to the > marvell,mv64xxx-i2c binding. These can be used to describe hardware > where a common reset GPIO is connected to all downstream devices on and > I2C bus. This reset will be asserted then released before the downstream > devices on the bus are probed. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index 461d1c9ee3f7..ecf5b279cfa4 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -70,6 +70,16 @@ properties: resets: maxItems: 1 + reset-gpios: + description: + GPIO pin providing a common reset for all downstream devices. This GPIO + will be asserted then released before the downstream devices are probed. + maxItems: 1 + + reset-duration-us: + description: Reset duration in us. + default: 1 + dmas: items: - description: RX DMA Channel
Add reset-gpios and reset-duration-us properties to the marvell,mv64xxx-i2c binding. These can be used to describe hardware where a common reset GPIO is connected to all downstream devices on and I2C bus. This reset will be asserted then released before the downstream devices on the bus are probed. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v3: - Rename reset-delay-us to reset-duration-us to better reflect its purpose - Add default: for reset-duration-us - Add description: for reset-gpios Changes in v2: - Update commit message - Add reset-delay-us property .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)