@@ -95,7 +95,7 @@
/**
* struct stm32f4_i2c_msg - client specific data
- * @addr: 8-bit slave addr, including r/w bit
+ * @addr: 8-bit target addr, including r/w bit
* @count: number of bytes to be transferred
* @buf: data buffer
* @result: result of the transfer
@@ -480,7 +480,7 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
/**
* stm32f4_i2c_handle_rx_addr() - Handle address matched interrupt in case of
- * master receiver
+ * controller receiver
* @i2c_dev: Controller's private data
*/
static void stm32f4_i2c_handle_rx_addr(struct stm32f4_i2c_dev *i2c_dev)
@@ -643,7 +643,7 @@ static irqreturn_t stm32f4_i2c_isr_error(int irq, void *data)
/*
* Acknowledge failure:
- * In master transmitter mode a Stop must be generated by software
+ * In controller transmitter mode a Stop must be generated by software
*/
if (status & STM32F4_I2C_SR1_AF) {
if (!(msg->addr & I2C_M_RD)) {
@@ -749,7 +749,7 @@ static u32 stm32f4_i2c_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm stm32f4_i2c_algo = {
- .master_xfer = stm32f4_i2c_xfer,
+ .xfer = stm32f4_i2c_xfer,
.functionality = stm32f4_i2c_func,
};
Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2 specifications and replace "master/slave" with more appropriate terms. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-stm32f4.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)