From patchwork Thu Aug 22 09:20:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chen-Yu Tsai X-Patchwork-Id: 821463 Received: from mail-oa1-f47.google.com (mail-oa1-f47.google.com [209.85.160.47]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DFF37185B62 for ; Thu, 22 Aug 2024 09:20:50 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.160.47 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724318452; cv=none; b=rlbj9rnlMAMqgrG5e23biYVoJDFuF41qDU5vxfGm9Udj1syLl4YkJm3pJ88vHxXQthjrW5r7p6qbkmGdiN/d4uUa75REg4YVfEOgavjWMx5wpUPRdcfiNSFAypIQC65kearTvqMbjxMFWPXHrfILkoAOczBcyvxj6SZirp8ZB+Q= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724318452; c=relaxed/simple; bh=7PXjrfDF7BHqqcZZ2pniX9XcCoIrPJyShubjWsTVSL0=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=YT4HOIqko7FF6e/USsKfg0UoG3smhpniNaFm/jhhKNEtC5tLzQLdYwL6wz39eJtV/uYJGXHQrJr2n8+/oQwdIL5x4uv/4Fc0js46UWvWE7ywXfgRdvw13tTvwB1VsSOHvc9z1gxzY21kv/H67rHC1SCjVOOAuajVl9mYBedWcQQ= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=chromium.org; spf=pass smtp.mailfrom=chromium.org; dkim=pass (1024-bit key) header.d=chromium.org header.i=@chromium.org header.b=E7hUJViD; arc=none smtp.client-ip=209.85.160.47 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=chromium.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=chromium.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=chromium.org header.i=@chromium.org header.b="E7hUJViD" Received: by mail-oa1-f47.google.com with SMTP id 586e51a60fabf-27010ae9815so351179fac.2 for ; Thu, 22 Aug 2024 02:20:50 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; t=1724318450; x=1724923250; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=oIuVa6xe5T9fPXAC3Ljp+tme57B/5X5NOOiRmoSNKDs=; b=E7hUJViD+HmX0CYsgTOuwYI7w6pVZ/Vasyorf3znHakonQgbIfNKSjk3+mwWj8GM66 UmhsG9pxdZlLdtwuyGIX7BHFeohxDYMAlHTOxJ0+6+jQx7Ro3fIoWg/ppUriAoLhpsR5 EZx02Ha8fUFmJwiAgvnfkNYeHP94XtiWjGhNw= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1724318450; x=1724923250; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=oIuVa6xe5T9fPXAC3Ljp+tme57B/5X5NOOiRmoSNKDs=; b=jfrRO5TTQ4BMi76L4ZjRO4SSvQ7Lbf32EqJj246/umM+Y4XMbODMdhivNwmRwuXUsW cX++Epwq65zqxJrBlHHCJfH/J3awy+Zh15sxJdud6Mp3ofvTfExecCOkLSinihrtTN3e PBntKCwrWq3RtXyp3+Z9eHDvcpH6B3z7yRYyh9JcgO4y9fPO6Of8GmkszVYk2EilIW2E gPCXZzkbvS8zACbp8gc3zI9cbmkfbt7f36XWluX1nRhURjR54ggNgnjwJYtXsdlNRO66 40h0pHW7InPrV805LWiFP4Q0h0Srf5iEbrBV3DqhG5xEnhzT0qwVqqhcvuV+q0/m3fVF 8FlQ== X-Forwarded-Encrypted: i=1; AJvYcCXU5oLfofzEnwxhQ6FhADVCAlhPmiUpkL1F2JMulWLZXke5WYbCWPKRfYX+kPufpg7mxZZRJ9aFtGk=@vger.kernel.org X-Gm-Message-State: AOJu0Yzo42vEDC41actogK9bZSaMb408ib4WxOz5SSqqSw+PsepAZ1y7 W0pcWL5qySnkT44rLdFfH7ZCYlTIUBsS3YOkdlmxfvVGOBG2dw0mqypcVmI1PA== X-Google-Smtp-Source: AGHT+IE7GKAi5GcWfleItjZNggbXuAhjFv7VDxVtEAzSHPTiX6tW2gRy6Kxe6kC20IJZDqjxfuUcSg== X-Received: by 2002:a05:6870:7a07:b0:260:fc49:3e96 with SMTP id 586e51a60fabf-273cff98fcbmr1222495fac.46.1724318449803; Thu, 22 Aug 2024 02:20:49 -0700 (PDT) Received: from wenstp920.tpe.corp.google.com ([2401:fa00:1:10:8470:6a67:8877:ce2c]) by smtp.gmail.com with ESMTPSA id d2e1a72fcca58-71434335e69sm951398b3a.194.2024.08.22.02.20.46 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 22 Aug 2024 02:20:49 -0700 (PDT) From: Chen-Yu Tsai To: Rob Herring , Saravana Kannan , Matthias Brugger , AngeloGioacchino Del Regno , Wolfram Sang , Benson Leung , Tzung-Bi Shih , Mark Brown , Liam Girdwood Cc: Chen-Yu Tsai , chrome-platform@lists.linux.dev, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org, Douglas Anderson , Johan Hovold , Jiri Kosina , Andy Shevchenko , linux-i2c@vger.kernel.org Subject: [PATCH v5 08/10] i2c: of-prober: Add GPIO support Date: Thu, 22 Aug 2024 17:20:01 +0800 Message-ID: <20240822092006.3134096-9-wenst@chromium.org> X-Mailer: git-send-email 2.46.0.184.g6999bdac58-goog In-Reply-To: <20240822092006.3134096-1-wenst@chromium.org> References: <20240822092006.3134096-1-wenst@chromium.org> Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 This adds GPIO management to the I2C OF component prober. Components that the prober intends to probe likely require their regulator supplies be enabled, and GPIOs be toggled to enable them or bring them out of reset before they will respond to probe attempts. regulator support was added in the previous patch. Without specific knowledge of each component's resource names or power sequencing requirements, the prober can only enable the regulator supplies all at once, and toggle the GPIOs all at once. Luckily, reset pins tend to be active low, while enable pins tend to be active high, so setting the raw status of all GPIO pins to high should work. The wait time before and after resources are enabled are collected from existing drivers and device trees. The prober collects resources from all possible components and enables them together, instead of enabling resources and probing each component one by one. The latter approach does not provide any boot time benefits over simply enabling each component and letting each driver probe sequentially. The prober will also deduplicate the resources, since on a component swap out or co-layout design, the resources are always the same. While duplicate regulator supplies won't cause much issue, shared GPIOs don't work reliably, especially with other drivers. For the same reason, the prober will release the GPIOs before the successfully probed component is actually enabled. Signed-off-by: Chen-Yu Tsai --- Changes since v4: - Split out from previous patch - Moved GPIO property name check to common function in gpiolib.c in new patch - Moved i2c_of_probe_free_gpios() into for_each_child_of_node_scoped() - Rewrote in gpiod_*_array-esque fashion --- drivers/i2c/i2c-core-of-prober.c | 126 ++++++++++++++++++++++++++++++- 1 file changed, 124 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/i2c-core-of-prober.c b/drivers/i2c/i2c-core-of-prober.c index 32184cfd10f6..046e6605053c 100644 --- a/drivers/i2c/i2c-core-of-prober.c +++ b/drivers/i2c/i2c-core-of-prober.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -29,11 +30,11 @@ * address responds. * * TODO: - * - Support handling common GPIOs. * - Support I2C muxes */ struct i2c_of_probe_data { + struct gpio_descs *gpiods; struct regulator_bulk_data *regulators; unsigned int regulators_num; }; @@ -71,8 +72,88 @@ static int i2c_of_probe_get_regulator(struct device *dev, struct device_node *no return ret; } +/* + * Returns 1 if property is GPIO and GPIO successfully requested, + * 0 if not a GPIO property, or error if request for GPIO failed. + */ +static int i2c_of_probe_get_gpiod(struct device_node *node, struct property *prop, + struct i2c_of_probe_data *data) +{ + struct fwnode_handle *fwnode = of_fwnode_handle(node); + struct gpio_descs *gpiods; + struct gpio_desc *gpiod; + char con[32]; /* 32 is max size of property name */ + char *con_id = NULL; + size_t new_size; + int len; + + len = gpio_property_name_length(prop->name); + if (len < 0) + return 0; + + if (len >= sizeof(con) - 1) { + pr_err("%pOF: length of GPIO name \"%s\" exceeds current limit\n", + node, prop->name); + return -EINVAL; + } + + if (len > 0) { + strscpy(con, prop->name, len + 1); + con_id = con; + } + + /* + * GPIO descriptors are not reference counted. GPIOD_FLAGS_BIT_NONEXCLUSIVE + * can't differentiate between GPIOs shared between devices to be probed and + * other devices (which is incorrect). If the initial request fails with + * -EBUSY, retry with GPIOD_FLAGS_BIT_NONEXCLUSIVE and see if it matches + * any existing ones. + */ + gpiod = fwnode_gpiod_get_index(fwnode, con_id, 0, GPIOD_ASIS, "i2c-of-prober"); + if (IS_ERR(gpiod)) { + int i; + + if (PTR_ERR(gpiod) != -EBUSY || !data->gpiods) + return PTR_ERR(gpiod); + + gpiod = fwnode_gpiod_get_index(fwnode, con_id, 0, + GPIOD_ASIS | GPIOD_FLAGS_BIT_NONEXCLUSIVE, + "i2c-of-prober"); + for (i = 0; i < data->gpiods->ndescs; i++) + if (gpiod == data->gpiods->desc[i]) + return 1; + + return -EBUSY; + } + + new_size = struct_size(gpiods, desc, data->gpiods ? data->gpiods->ndescs + 1 : 1); + gpiods = krealloc(data->gpiods, new_size, GFP_KERNEL); + if (!gpiods) { + gpiod_put(gpiod); + return -ENOMEM; + } + + data->gpiods = gpiods; + data->gpiods->desc[data->gpiods->ndescs++] = gpiod; + + return 1; +} + +/* + * This is split into two functions because in the normal flow the GPIOs + * have to be released before the actual driver probes so that the latter + * can acquire them. + */ +static void i2c_of_probe_free_gpios(struct i2c_of_probe_data *data) +{ + if (data->gpiods) + gpiod_put_array(data->gpiods); + data->gpiods = NULL; +} + static void i2c_of_probe_free_res(struct i2c_of_probe_data *data) { + i2c_of_probe_free_gpios(data); regulator_bulk_free(data->regulators_num, data->regulators); } @@ -88,6 +169,18 @@ static int i2c_of_probe_get_res(struct device *dev, struct device_node *node, goto err_cleanup; } + for_each_property_of_node(node, prop) { + dev_dbg(dev, "Trying property %pOF/%s\n", node, prop->name); + + /* GPIOs */ + ret = i2c_of_probe_get_gpiod(node, prop, data); + if (ret < 0) { + dev_err_probe(dev, ret, "Failed to get GPIO from %pOF/%s\n", + node, prop->name); + goto err_cleanup; + } + } + return 0; err_cleanup: @@ -98,6 +191,7 @@ static int i2c_of_probe_get_res(struct device *dev, struct device_node *node, static int i2c_of_probe_enable_res(struct device *dev, struct i2c_of_probe_data *data) { int ret = 0; + int gpio_i; dev_dbg(dev, "Enabling regulator supplies\n"); @@ -108,7 +202,32 @@ static int i2c_of_probe_enable_res(struct device *dev, struct i2c_of_probe_data /* largest post-power-on pre-reset-deassert delay seen among drivers */ msleep(500); + if (!data->gpiods) + return 0; + + for (gpio_i = 0; gpio_i < data->gpiods->ndescs; gpio_i++) { + /* + * reset GPIOs normally have opposite polarity compared to + * enable GPIOs. Instead of parsing the flags again, simply + * set the raw value to high. + */ + dev_dbg(dev, "Setting GPIO %d\n", gpio_i); + ret = gpiod_direction_output_raw(data->gpiods->desc[gpio_i], 1); + if (ret) + goto disable_gpios; + } + + /* largest post-reset-deassert delay seen in tree for Elan I2C HID */ + msleep(300); + return 0; + +disable_gpios: + for (gpio_i--; gpio_i >= 0; gpio_i--) + gpiod_set_raw_value_cansleep(data->gpiods->desc[gpio_i], 0); + regulator_bulk_disable(data->regulators_num, data->regulators); + + return ret; } static void i2c_of_probe_disable_regulators(struct i2c_of_probe_data *data) @@ -234,7 +353,9 @@ int i2c_of_probe_component(struct device *dev, const char *type) return ret; } - dev_dbg(dev, "Resources: # of regulator supplies = %d\n", probe_data.regulators_num); + dev_dbg(dev, "Resources: # of GPIOs = %d, # of regulator supplies = %d\n", + probe_data.gpiods ? probe_data.gpiods->ndescs : 0, + probe_data.regulators_num); /* Enable resources */ ret = i2c_of_probe_enable_res(dev, &probe_data); @@ -256,6 +377,7 @@ int i2c_of_probe_component(struct device *dev, const char *type) continue; /* Found a device that is responding */ + i2c_of_probe_free_gpios(&probe_data); ret = i2c_of_probe_enable_node(dev, node); break; }