From patchwork Thu Oct 10 02:53:16 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Aryan Srivastava X-Patchwork-Id: 834996 Received: from gate2.alliedtelesis.co.nz (gate2.alliedtelesis.co.nz [202.36.163.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2EB7218FC86 for ; Thu, 10 Oct 2024 02:54:03 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=202.36.163.20 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728528845; cv=none; b=JhV/AxZujy44NUPVb8YAWGtdGtflbq6eXtVBa71l0CLwrTE9DMB+WqkDNW/KHMkXtPOKD5KUvL9OXdb4ylOsDq3tuEhx38m+fp5uXzy/stLnlYzdQbberXoxo288iD3sqDaCQcxG1iJnS9taTIsEZQ4du8vOZq1U3Txf82UHE80= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1728528845; c=relaxed/simple; bh=hHErYz2bstr7hnHnMjesxQUutOJEZVKCtAOCk5gRNus=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=bipQma5k4YX4r9iHXs7B3wYasABGPVYVTp9S9rTk7lzcEV4mPp6j0TVpj6gUjGja5IJ9gMf3ZDG7gZTNHwnfQIjLCJUSvANiF3lMjqnOsD9sGEPHpWOQX43bzTOddPFsp8t8maKCCi3qP+pUDnCgqsV+s2KNU0J0M1pYqkOz+bw= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=alliedtelesis.co.nz; spf=pass smtp.mailfrom=alliedtelesis.co.nz; dkim=pass (2048-bit key) header.d=alliedtelesis.co.nz header.i=@alliedtelesis.co.nz header.b=NmRfo4N2; arc=none smtp.client-ip=202.36.163.20 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=alliedtelesis.co.nz Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=alliedtelesis.co.nz Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=alliedtelesis.co.nz header.i=@alliedtelesis.co.nz header.b="NmRfo4N2" Received: from svr-chch-seg1.atlnz.lc (mmarshal3.atlnz.lc [10.32.18.43]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by gate2.alliedtelesis.co.nz (Postfix) with ESMTPS id CAA5E2C0B81; Thu, 10 Oct 2024 15:54:01 +1300 (NZDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alliedtelesis.co.nz; s=mail181024; t=1728528841; bh=Y3PJq4ZOwfuQ+yGqMoWnnzJm7GnQgrb7P2taxDljH54=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=NmRfo4N276W0duIwWpke7VKE+0xiZ7/ShsN1p4jPz7Bw29xvL3yx6b2tlrYgILFSw FvvfkiVoAv6i/sYLnxX1Zo5yyuo1pzwEA7qQG0M5oQYx9X4aoKAiCADKR2Q5Yygjcr vmZpCx1VWCGzcX2igKQKyfAWKQt3m63KfB7+9SjUr1faCCmuu/HgTp2Kmb0KYGMjw2 8NTkV/GPKpClCYgv0X9lpjRvb3vYH/27Ron4jsRJ+Ppq4K9Y8Pajc7O4h8OstTFF0c E7qx+O8dHy4z8c4WTI5fQGzPC68fV9PfSCZ9MQqI1LhBUm/R7SyJVpW5TqC9oFwdG+ S8vcscAEmCylg== Received: from pat.atlnz.lc (Not Verified[10.32.16.33]) by svr-chch-seg1.atlnz.lc with Trustwave SEG (v8,2,6,11305) id ; Thu, 10 Oct 2024 15:54:01 +1300 Received: from aryans-dl.ws.atlnz.lc (aryans-dl.ws.atlnz.lc [10.33.22.38]) by pat.atlnz.lc (Postfix) with ESMTP id 8C76B13ED7B; Thu, 10 Oct 2024 15:54:01 +1300 (NZDT) Received: by aryans-dl.ws.atlnz.lc (Postfix, from userid 1844) id 8BF5B2A0BF8; Thu, 10 Oct 2024 15:54:01 +1300 (NZDT) From: Aryan Srivastava To: Andi Shyti , Markus Elfring Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, Aryan Srivastava , Robert Richter Subject: [PATCH v10 2/2] i2c: octeon: Add block-mode i2c operations Date: Thu, 10 Oct 2024 15:53:16 +1300 Message-ID: <20241010025317.2040470-3-aryan.srivastava@alliedtelesis.co.nz> X-Mailer: git-send-email 2.46.0 In-Reply-To: <20241010025317.2040470-1-aryan.srivastava@alliedtelesis.co.nz> References: <20241010025317.2040470-1-aryan.srivastava@alliedtelesis.co.nz> Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-SEG-SpamProfiler-Analysis: v=2.4 cv=ca1xrWDM c=1 sm=1 tr=0 ts=670741c9 a=KLBiSEs5mFS1a/PbTCJxuA==:117 a=DAUX931o1VcA:10 a=_GL4yYo1NFTcpOcRNZkA:9 a=3ZKOabzyN94A:10 X-SEG-SpamProfiler-Score: 0 x-atlnz-ls: pat Add functions to perform block read and write operations. This applies for cases where the requested operation is for >8 bytes of data. When not using the block mode transfer, the driver will attempt a series of 8 byte i2c operations until it reaches the desired total. For example, for a 40 byte request the driver will complete 5 separate transactions. This results in large transactions taking a significant amount of time to process. Add block mode such that the driver can request larger transactions, up to 1024 bytes per transfer. Many aspects of the block mode transfer is common with the regular 8 byte operations. Use generic functions for parts of the message construction and sending the message. The key difference for the block mode is the usage of separate FIFO buffer to store data. Write to this buffer in the case of a write (before command send). Read from this buffer in the case of a read (after command send). Data is written into this buffer by placing data into the MSB onwards. This means the bottom 8 bits of the data will match the top 8 bits, and so on and so forth. Set specific bits in message for block mode, enable block mode transfers from global i2c management registers, construct message, send message, read or write from FIFO buffer as required. The block-mode transactions result in a significant speed increase in large i2c requests. Signed-off-by: Aryan Srivastava --- drivers/i2c/busses/i2c-octeon-core.c | 155 ++++++++++++++++++++++- drivers/i2c/busses/i2c-octeon-core.h | 13 +- drivers/i2c/busses/i2c-thunderx-pcidrv.c | 3 + 3 files changed, 164 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c index 3fbc828508ab..be98f919c6d9 100644 --- a/drivers/i2c/busses/i2c-octeon-core.c +++ b/drivers/i2c/busses/i2c-octeon-core.c @@ -135,6 +135,32 @@ static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c) octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB); } +static void octeon_i2c_block_enable(struct octeon_i2c *i2c) +{ + u64 mode; + + if (i2c->block_enabled || !OCTEON_REG_BLOCK_CTL(i2c)) + return; + + i2c->block_enabled = true; + mode = __raw_readq(i2c->twsi_base + OCTEON_REG_MODE(i2c)); + mode |= TWSX_MODE_BLOCK_MODE; + octeon_i2c_writeq_flush(mode, i2c->twsi_base + OCTEON_REG_MODE(i2c)); +} + +static void octeon_i2c_block_disable(struct octeon_i2c *i2c) +{ + u64 mode; + + if (!i2c->block_enabled || !OCTEON_REG_BLOCK_CTL(i2c)) + return; + + i2c->block_enabled = false; + mode = __raw_readq(i2c->twsi_base + OCTEON_REG_MODE(i2c)); + mode &= ~TWSX_MODE_BLOCK_MODE; + octeon_i2c_writeq_flush(mode, i2c->twsi_base + OCTEON_REG_MODE(i2c)); +} + /** * octeon_i2c_hlc_wait - wait for an HLC operation to complete * @i2c: The struct octeon_i2c @@ -281,6 +307,7 @@ static int octeon_i2c_start(struct octeon_i2c *i2c) u8 stat; octeon_i2c_hlc_disable(i2c); + octeon_i2c_block_disable(i2c); octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA); ret = octeon_i2c_wait(i2c); @@ -619,6 +646,114 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg return ret; } +/** + * octeon_i2c_hlc_block_comp_read - high-level-controller composite block read + * @i2c: The struct octeon_i2c + * @msgs: msg[0] contains address, place read data into msg[1] + * + * i2c core command is constructed and written into the SW_TWSI register. + * The execution of the command will result in requested data being + * placed into a FIFO buffer, ready to be read. + * Used in the case where the i2c xfer is for greater than 8 bytes of read data. + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_hlc_block_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs) +{ + int len, ret = 0; + u64 cmd = 0; + + octeon_i2c_hlc_enable(i2c); + octeon_i2c_block_enable(i2c); + + /* Write (size - 1) into block control register */ + len = msgs[1].len - 1; + octeon_i2c_writeq_flush((u64)(len), i2c->twsi_base + OCTEON_REG_BLOCK_CTL(i2c)); + + /* Prepare core command */ + cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR; + cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT; + + /* Send core command */ + ret = octeon_i2c_hlc_read_cmd(i2c, msgs[0], cmd); + if (ret) + return ret; + + cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c)); + if ((cmd & SW_TWSI_R) == 0) + return octeon_i2c_check_status(i2c, false); + + /* read data in FIFO */ + octeon_i2c_writeq_flush(TWSX_BLOCK_STS_RESET_PTR, + i2c->twsi_base + OCTEON_REG_BLOCK_STS(i2c)); + for (int i = 0; i < len; i += 8) { + u64 rd = __raw_readq(i2c->twsi_base + OCTEON_REG_BLOCK_FIFO(i2c)); + /* Place data into msg buf from FIFO, MSB onwards */ + for (int j = 7; j >= 0; j--) + msgs[1].buf[i + (7 - j)] = (rd >> (8 * j)) & 0xff; + } + + octeon_i2c_block_disable(i2c); + return ret; +} + +/** + * octeon_i2c_hlc_block_comp_write - high-level-controller composite block write + * @i2c: The struct octeon_i2c + * @msgs: msg[0] contains address, msg[1] contains data to be written + * + * i2c core command is constructed and write data is written into the FIFO buffer. + * The execution of the command will result in HW write, using the data in FIFO. + * Used in the case where the i2c xfer is for greater than 8 bytes of write data. + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_hlc_block_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msgs) +{ + bool set_ext = false; + int len, ret = 0; + u64 cmd, ext = 0; + + octeon_i2c_hlc_enable(i2c); + octeon_i2c_block_enable(i2c); + + /* Write (size - 1) into block control register */ + len = msgs[1].len - 1; + octeon_i2c_writeq_flush((u64)(len), i2c->twsi_base + OCTEON_REG_BLOCK_CTL(i2c)); + + /* Prepare core command */ + cmd = SW_TWSI_V | SW_TWSI_SOVR; + cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT; + + /* Set parameters for extended message (if required) */ + set_ext = octeon_i2c_hlc_ext(i2c, msgs[0], &cmd, &ext); + + /* Write msg into FIFO buffer */ + octeon_i2c_writeq_flush(TWSX_BLOCK_STS_RESET_PTR, + i2c->twsi_base + OCTEON_REG_BLOCK_STS(i2c)); + for (int i = 0; i < len; i += 8) { + u64 buf = 0; + /* Place data from msg buf into FIFO, MSB onwards */ + for (int j = 7; j >= 0; j--) + buf |= (msgs[1].buf[i + (7 - j)] << (8 * j)); + octeon_i2c_writeq_flush(buf, i2c->twsi_base + OCTEON_REG_BLOCK_FIFO(i2c)); + } + if (set_ext) + octeon_i2c_writeq_flush(ext, i2c->twsi_base + OCTEON_REG_SW_TWSI_EXT(i2c)); + + /* Send command to core (send data in FIFO) */ + ret = octeon_i2c_hlc_cmd_send(i2c, cmd); + if (ret) + return ret; + + cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c)); + if ((cmd & SW_TWSI_R) == 0) + return octeon_i2c_check_status(i2c, false); + + octeon_i2c_block_disable(i2c); + return ret; +} + /** * octeon_i2c_xfer - The driver's xfer function * @adap: Pointer to the i2c_adapter structure @@ -645,13 +780,21 @@ int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if ((msgs[0].flags & I2C_M_RD) == 0 && (msgs[1].flags & I2C_M_RECV_LEN) == 0 && msgs[0].len > 0 && msgs[0].len <= 2 && - msgs[1].len > 0 && msgs[1].len <= 8 && + msgs[1].len > 0 && msgs[0].addr == msgs[1].addr) { - if (msgs[1].flags & I2C_M_RD) - ret = octeon_i2c_hlc_comp_read(i2c, msgs); - else - ret = octeon_i2c_hlc_comp_write(i2c, msgs); - goto out; + if (msgs[1].len <= 8) { + if (msgs[1].flags & I2C_M_RD) + ret = octeon_i2c_hlc_comp_read(i2c, msgs); + else + ret = octeon_i2c_hlc_comp_write(i2c, msgs); + goto out; + } else if (msgs[1].len <= 1024 && OCTEON_REG_BLOCK_CTL(i2c)) { + if (msgs[1].flags & I2C_M_RD) + ret = octeon_i2c_hlc_block_comp_read(i2c, msgs); + else + ret = octeon_i2c_hlc_block_comp_write(i2c, msgs); + goto out; + } } } } diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h index b265e21189a1..495161c6d2de 100644 --- a/drivers/i2c/busses/i2c-octeon-core.h +++ b/drivers/i2c/busses/i2c-octeon-core.h @@ -96,18 +96,28 @@ struct octeon_i2c_reg_offset { unsigned int twsi_int; unsigned int sw_twsi_ext; unsigned int mode; + unsigned int block_ctl; + unsigned int block_sts; + unsigned int block_fifo; }; #define OCTEON_REG_SW_TWSI(x) ((x)->roff.sw_twsi) #define OCTEON_REG_TWSI_INT(x) ((x)->roff.twsi_int) #define OCTEON_REG_SW_TWSI_EXT(x) ((x)->roff.sw_twsi_ext) #define OCTEON_REG_MODE(x) ((x)->roff.mode) +#define OCTEON_REG_BLOCK_CTL(x) (x->roff.block_ctl) +#define OCTEON_REG_BLOCK_STS(x) (x->roff.block_sts) +#define OCTEON_REG_BLOCK_FIFO(x) (x->roff.block_fifo) -/* Set REFCLK_SRC and HS_MODE in TWSX_MODE register */ +/* TWSX_MODE register */ #define TWSX_MODE_REFCLK_SRC BIT(4) +#define TWSX_MODE_BLOCK_MODE BIT(2) #define TWSX_MODE_HS_MODE BIT(0) #define TWSX_MODE_HS_MASK (TWSX_MODE_REFCLK_SRC | TWSX_MODE_HS_MODE) +/* TWSX_BLOCK_STS register */ +#define TWSX_BLOCK_STS_RESET_PTR BIT(0) + /* Set BUS_MON_RST to reset bus monitor */ #define BUS_MON_RST_MASK BIT(3) @@ -123,6 +133,7 @@ struct octeon_i2c { void __iomem *twsi_base; struct device *dev; bool hlc_enabled; + bool block_enabled; bool broken_irq_mode; bool broken_irq_check; void (*int_enable)(struct octeon_i2c *); diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c index 143d012fa43e..0dc08cd97e8a 100644 --- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c @@ -168,6 +168,9 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev, i2c->roff.twsi_int = 0x1010; i2c->roff.sw_twsi_ext = 0x1018; i2c->roff.mode = 0x1038; + i2c->roff.block_ctl = 0x1048; + i2c->roff.block_sts = 0x1050; + i2c->roff.block_fifo = 0x1058; i2c->dev = dev; pci_set_drvdata(pdev, i2c);