Message ID | 20241021062732.5592-3-kfting@nuvoton.com |
---|---|
State | New |
Headers | show |
Series | i2c: npcm: read/write operation, checkpatch | expand |
Dear Tyrone, Thank you for your patch. Am 21.10.24 um 08:27 schrieb Tyrone Ting: > From: Tyrone Ting <kfting@nuvoton.com> > > Store the client address earlier since it might get called in > the i2c_recover_bus() logic flow at the early stage of > npcm_i2c_master_xfer(). Thank you for the description. For the summary/title it’d be great, if you were more specific. For example: i2c: npcm: Assign client address earlier for `i2c_recover_bus()` It’d be great if you noted the commit, your patch fixes, so it’s clear since when the problem has been present. > Signed-off-by: Tyrone Ting <kfting@nuvoton.com> > Reviewed-by: Tali Perry <tali.perry1@gmail.com> > --- > drivers/i2c/busses/i2c-npcm7xx.c | 20 +++++++++++++++++++- > 1 file changed, 19 insertions(+), 1 deletion(-) > > diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c > index c96a25d37c14..a9a9b21f1f0b 100644 > --- a/drivers/i2c/busses/i2c-npcm7xx.c > +++ b/drivers/i2c/busses/i2c-npcm7xx.c > @@ -2155,6 +2155,16 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, > > } while (time_is_after_jiffies(time_left) && bus_busy); > > + /* > + * Previously, the 7-bit address was stored and being converted to > + * the address of event in the following call to npcm_i2c_master_start_xmit(). > + * > + * Since there are cases that the i2c_recover_bus() gets called at the > + * early stage of npcm_i2c_master_xfer(), the address of event is stored > + * and then used in the i2c_recover_bus(). > + */ > + bus->dest_addr = i2c_8bit_addr_from_msg(msg0); > + > /* > * Check the BER (bus error) state, when ber_state is true, it means that the module > * detects the bus error which is caused by some factor like that the electricity > @@ -2165,6 +2175,15 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, > * bus is busy. > */ > if (bus_busy || bus->ber_state) { > + /* > + * Since the transfer might be a read operation, remove the I2C_M_RD flag > + * from the bus->dest_addr for the i2c_recover_bus() call later. > + * > + * The i2c_recover_bus() uses the address in a write direction to recover > + * the i2c bus if some error condition occurs. > + */ > + bus->dest_addr &= ~I2C_M_RD; > + > iowrite8(NPCM_I2CCST_BB, bus->reg + NPCM_I2CCST); > npcm_i2c_reset(bus); > i2c_recover_bus(adap); > @@ -2172,7 +2191,6 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, > } > > npcm_i2c_init_params(bus); > - bus->dest_addr = slave_addr; > bus->msgs = msgs; > bus->msgs_num = num; > bus->cmd_err = 0; Kind regards, Paul
Hi Paul: Thank you for your comment. It'll be addressed in the next patch set. Paul Menzel <pmenzel@molgen.mpg.de> 於 2024年10月21日 週一 下午3:01寫道: > > Dear Tyrone, > > > Thank you for your patch. > > Am 21.10.24 um 08:27 schrieb Tyrone Ting: > > From: Tyrone Ting <kfting@nuvoton.com> > > > > Store the client address earlier since it might get called in > > the i2c_recover_bus() logic flow at the early stage of > > npcm_i2c_master_xfer(). > > Thank you for the description. For the summary/title it’d be great, if > you were more specific. For example: > > i2c: npcm: Assign client address earlier for `i2c_recover_bus()` > > It’d be great if you noted the commit, your patch fixes, so it’s clear > since when the problem has been present. > > > Signed-off-by: Tyrone Ting <kfting@nuvoton.com> > > Reviewed-by: Tali Perry <tali.perry1@gmail.com> > > --- > > drivers/i2c/busses/i2c-npcm7xx.c | 20 +++++++++++++++++++- > > 1 file changed, 19 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c > > index c96a25d37c14..a9a9b21f1f0b 100644 > > --- a/drivers/i2c/busses/i2c-npcm7xx.c > > +++ b/drivers/i2c/busses/i2c-npcm7xx.c > > @@ -2155,6 +2155,16 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, > > > > } while (time_is_after_jiffies(time_left) && bus_busy); > > > > + /* > > + * Previously, the 7-bit address was stored and being converted to > > + * the address of event in the following call to npcm_i2c_master_start_xmit(). > > + * > > + * Since there are cases that the i2c_recover_bus() gets called at the > > + * early stage of npcm_i2c_master_xfer(), the address of event is stored > > + * and then used in the i2c_recover_bus(). > > + */ > > + bus->dest_addr = i2c_8bit_addr_from_msg(msg0); > > + > > /* > > * Check the BER (bus error) state, when ber_state is true, it means that the module > > * detects the bus error which is caused by some factor like that the electricity > > @@ -2165,6 +2175,15 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, > > * bus is busy. > > */ > > if (bus_busy || bus->ber_state) { > > + /* > > + * Since the transfer might be a read operation, remove the I2C_M_RD flag > > + * from the bus->dest_addr for the i2c_recover_bus() call later. > > + * > > + * The i2c_recover_bus() uses the address in a write direction to recover > > + * the i2c bus if some error condition occurs. > > + */ > > + bus->dest_addr &= ~I2C_M_RD; > > + > > iowrite8(NPCM_I2CCST_BB, bus->reg + NPCM_I2CCST); > > npcm_i2c_reset(bus); > > i2c_recover_bus(adap); > > @@ -2172,7 +2191,6 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, > > } > > > > npcm_i2c_init_params(bus); > > - bus->dest_addr = slave_addr; > > bus->msgs = msgs; > > bus->msgs_num = num; > > bus->cmd_err = 0; > > > Kind regards, > > Paul Have a nice day. Regards, Tyrone
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c index c96a25d37c14..a9a9b21f1f0b 100644 --- a/drivers/i2c/busses/i2c-npcm7xx.c +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -2155,6 +2155,16 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, } while (time_is_after_jiffies(time_left) && bus_busy); + /* + * Previously, the 7-bit address was stored and being converted to + * the address of event in the following call to npcm_i2c_master_start_xmit(). + * + * Since there are cases that the i2c_recover_bus() gets called at the + * early stage of npcm_i2c_master_xfer(), the address of event is stored + * and then used in the i2c_recover_bus(). + */ + bus->dest_addr = i2c_8bit_addr_from_msg(msg0); + /* * Check the BER (bus error) state, when ber_state is true, it means that the module * detects the bus error which is caused by some factor like that the electricity @@ -2165,6 +2175,15 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, * bus is busy. */ if (bus_busy || bus->ber_state) { + /* + * Since the transfer might be a read operation, remove the I2C_M_RD flag + * from the bus->dest_addr for the i2c_recover_bus() call later. + * + * The i2c_recover_bus() uses the address in a write direction to recover + * the i2c bus if some error condition occurs. + */ + bus->dest_addr &= ~I2C_M_RD; + iowrite8(NPCM_I2CCST_BB, bus->reg + NPCM_I2CCST); npcm_i2c_reset(bus); i2c_recover_bus(adap); @@ -2172,7 +2191,6 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, } npcm_i2c_init_params(bus); - bus->dest_addr = slave_addr; bus->msgs = msgs; bus->msgs_num = num; bus->cmd_err = 0;