mbox series

[v2,0/4] Add support for vibrator motor for TBS A711 Tablet

Message ID 20200512222205.1456300-1-megous@megous.com
Headers show
Series Add support for vibrator motor for TBS A711 Tablet | expand

Message

Ondrej Jirman May 12, 2020, 10:22 p.m. UTC 
The tablet has a vibrator motor. This patch series exposes it via
input subsystem (EV_FF).

I'd like to ask input maintainers to take the patches 1 and 2.
Patches 3 and 4 should go via the sunxi tree.

The change to the vibrator driver is meant to enable toggling the
vibrator motor just via a power supply itself. There's not additional
gpio driven switch on this tablet between the power supply for the
motor and the motor.

Please take a look.

Changes in v2:
- Added DT ack tag
- Add more information to the commit log (re use of LDO for the power)


thank you and regards,
  Ondrej Jirman

Ondrej Jirman (4):
  dt-bindings: input: gpio-vibrator: Don't require enable-gpios
  input: gpio-vibra: Allow to use vcc-supply alone to control the
    vibrator
  ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor
  ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator

 .../devicetree/bindings/input/gpio-vibrator.yaml         | 1 -
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts                | 9 +++++++--
 drivers/input/misc/gpio-vibra.c                          | 3 ++-
 3 files changed, 9 insertions(+), 4 deletions(-)