@@ -40,8 +40,11 @@
#define IQS5XX_PROJ_NUM_B000 15
#define IQS5XX_MAJOR_VER_MIN 2
-#define IQS5XX_RESUME 0x00
-#define IQS5XX_SUSPEND 0x01
+#define IQS5XX_SHOW_RESET BIT(7)
+#define IQS5XX_ACK_RESET BIT(7)
+
+#define IQS5XX_SUSPEND BIT(0)
+#define IQS5XX_RESUME 0
#define IQS5XX_SW_INPUT_EVENT 0x10
#define IQS5XX_SETUP_COMPLETE 0x40
@@ -53,8 +56,8 @@
#define IQS5XX_SWITCH_XY_AXIS 0x04
#define IQS5XX_PROD_NUM 0x0000
-#define IQS5XX_ABS_X 0x0016
-#define IQS5XX_ABS_Y 0x0018
+#define IQS5XX_SYS_INFO0 0x000F
+#define IQS5XX_SYS_INFO1 0x0010
#define IQS5XX_SYS_CTRL0 0x0431
#define IQS5XX_SYS_CTRL1 0x0432
#define IQS5XX_SYS_CFG0 0x058E
@@ -127,6 +130,14 @@ struct iqs5xx_touch_data {
u8 area;
} __packed;
+struct iqs5xx_status {
+ u8 sys_info[2];
+ u8 num_active;
+ __be16 rel_x;
+ __be16 rel_y;
+ struct iqs5xx_touch_data touch_data[IQS5XX_NUM_CONTACTS];
+} __packed;
+
static int iqs5xx_read_burst(struct i2c_client *client,
u16 reg, void *val, u16 len)
{
@@ -676,6 +687,10 @@ static int iqs5xx_dev_init(struct i2c_client *client)
if (error)
return error;
+ error = iqs5xx_write_byte(client, IQS5XX_SYS_CTRL0, IQS5XX_ACK_RESET);
+ if (error)
+ return error;
+
error = iqs5xx_read_byte(client, IQS5XX_SYS_CFG0, &val);
if (error)
return error;
@@ -712,7 +727,7 @@ static int iqs5xx_dev_init(struct i2c_client *client)
static irqreturn_t iqs5xx_irq(int irq, void *data)
{
struct iqs5xx_private *iqs5xx = data;
- struct iqs5xx_touch_data touch_data[IQS5XX_NUM_CONTACTS];
+ struct iqs5xx_status status;
struct i2c_client *client = iqs5xx->client;
struct input_dev *input = iqs5xx->input;
int error, i;
@@ -725,21 +740,35 @@ static irqreturn_t iqs5xx_irq(int irq, void *data)
if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
return IRQ_NONE;
- error = iqs5xx_read_burst(client, IQS5XX_ABS_X,
- touch_data, sizeof(touch_data));
+ error = iqs5xx_read_burst(client, IQS5XX_SYS_INFO0,
+ &status, sizeof(status));
if (error)
return IRQ_NONE;
- for (i = 0; i < ARRAY_SIZE(touch_data); i++) {
- u16 pressure = be16_to_cpu(touch_data[i].strength);
+ if (status.sys_info[0] & IQS5XX_SHOW_RESET) {
+ dev_err(&client->dev, "Unexpected device reset\n");
+
+ error = iqs5xx_dev_init(client);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to re-initialize device: %d\n", error);
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(status.touch_data); i++) {
+ struct iqs5xx_touch_data *touch_data = &status.touch_data[i];
+ u16 pressure = be16_to_cpu(touch_data->strength);
input_mt_slot(input, i);
if (input_mt_report_slot_state(input, MT_TOOL_FINGER,
pressure != 0)) {
input_report_abs(input, ABS_MT_POSITION_X,
- be16_to_cpu(touch_data[i].abs_x));
+ be16_to_cpu(touch_data->abs_x));
input_report_abs(input, ABS_MT_POSITION_Y,
- be16_to_cpu(touch_data[i].abs_y));
+ be16_to_cpu(touch_data->abs_y));
input_report_abs(input, ABS_MT_PRESSURE, pressure);
}
}
The device may be inadvertently reset during runtime in the event of ESD strike, etc. To protect against this case, acknowledge the SHOW_RESET interrupt and re-initialize the device. To facilitate this change, expand the range of registers that are read in the interrupt handler to include the system status fields. Also, update the unrelated (but nearby) SUSPEND register field to use the BIT() macro. The remaining register fields are cleaned up in another patch. Signed-off-by: Jeff LaBundy <jeff@labundy.com> --- drivers/input/touchscreen/iqs5xx.c | 51 ++++++++++++++++++++++++++++++-------- 1 file changed, 40 insertions(+), 11 deletions(-)