Message ID | 20200907204045.95530-2-sebastian.reichel@collabora.com |
---|---|
State | New |
Headers | show |
Series | Rotary Encoder Push Button Support | expand |
On Mon, Sep 07, 2020 at 10:40:42PM +0200, Sebastian Reichel wrote: > Convert rotary-encoder bindings to YAML schema. > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> > --- > .../bindings/input/rotary-encoder.txt | 50 --------- > .../bindings/input/rotary-encoder.yaml | 100 ++++++++++++++++++ > 2 files changed, 100 insertions(+), 50 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt > create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml > > diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt > deleted file mode 100644 > index a644408b33b8..000000000000 > --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt > +++ /dev/null > @@ -1,50 +0,0 @@ > -Rotary encoder DT bindings > - > -Required properties: > -- gpios: a spec for at least two GPIOs to be used, most significant first > - > -Optional properties: > -- linux,axis: the input subsystem axis to map to this rotary encoder. > - Defaults to 0 (ABS_X / REL_X) > -- rotary-encoder,steps: Number of steps in a full turnaround of the > - encoder. Only relevant for absolute axis. Defaults to 24 which is a > - typical value for such devices. > -- rotary-encoder,relative-axis: register a relative axis rather than an > - absolute one. Relative axis will only generate +1/-1 events on the input > - device, hence no steps need to be passed. > -- rotary-encoder,rollover: Automatic rollover when the rotary value becomes > - greater than the specified steps or smaller than 0. For absolute axis only. > -- rotary-encoder,steps-per-period: Number of steps (stable states) per period. > - The values have the following meaning: > - 1: Full-period mode (default) > - 2: Half-period mode > - 4: Quarter-period mode > -- wakeup-source: Boolean, rotary encoder can wake up the system. > -- rotary-encoder,encoding: String, the method used to encode steps. > - Supported are "gray" (the default and more common) and "binary". > - > -Deprecated properties: > -- rotary-encoder,half-period: Makes the driver work on half-period mode. > - This property is deprecated. Instead, a 'steps-per-period ' value should > - be used, such as "rotary-encoder,steps-per-period = <2>". > - > -See Documentation/input/devices/rotary-encoder.rst for more information. > - > -Example: > - > - rotary@0 { > - compatible = "rotary-encoder"; > - gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ > - linux,axis = <0>; /* REL_X */ > - rotary-encoder,encoding = "gray"; > - rotary-encoder,relative-axis; > - }; > - > - rotary@1 { > - compatible = "rotary-encoder"; > - gpios = <&gpio 21 0>, <&gpio 22 0>; > - linux,axis = <1>; /* ABS_Y */ > - rotary-encoder,steps = <24>; > - rotary-encoder,encoding = "binary"; > - rotary-encoder,rollover; > - }; > diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.yaml b/Documentation/devicetree/bindings/input/rotary-encoder.yaml > new file mode 100644 > index 000000000000..5b60ea86bd62 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/rotary-encoder.yaml > @@ -0,0 +1,100 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/rotary-encoder.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Generic Rotary Encoder > + > +maintainers: > + - Dmitry Torokhov <dmitry.torokhov@gmail.com> > + > +description: > + See Documentation/input/devices/rotary-encoder.rst for more information. > + > +properties: > + compatible: > + const: rotary-encoder > + > + gpios: > + minItems: 2 You need to specify maxItems too. A 'should be enough for everyone'TM value is fine here if there's no real max. > + description: GPIOs for the rotation signals, most significant first > + > + linux,axis: > + description: > + The input subsystem axis to map to this rotary encoder. > + Defaults to (ABS_X / REL_X). > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 0 > + > + rotary-encoder,rollover: > + description: > + Automatic rollover when the rotary value becomes greater than the > + specified steps or smaller than 0. For absolute axis only. > + type: boolean > + > + rotary-encoder,steps-per-period: > + description: The values have the following meaning > + 1 - Full-period mode > + 2 - Half-period mode > + 4 - Quarter-period mode You need a '|' after 'descripton' to preserve formatting here. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [1, 2, 4] > + default: 1 > + > + wakeup-source: > + description: Rotary encoder can wake up the system. > + type: boolean > + > + rotary-encoder,encoding: > + description: > + Method used to encode steps. Gray code is more common. > + $ref: /schemas/types.yaml#/definitions/string > + enum: ["gray", "binary"] > + default: "gray" Don't need quotes. > + > + rotary-encoder,half-period: > + description: > + Deprecated, use "rotary-encoder,steps-per-period = <2>" instead. > + type: boolean > + deprecated: True > + > + rotary-encoder,steps: > + description: > + Number of steps in a full turnaround of the encoder. Only relevant > + for absolute axis. Defaults to 24 which is a typical value for such > + devices. > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 24 > + > + rotary-encoder,relative-axis: > + description: > + register a relative axis rather than an absolute one. Relative axis > + will only generate +1/-1 events on the input device, hence no steps > + need to be passed. > + type: boolean > + > +required: > + - compatible > + - gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include "dt-bindings/gpio/gpio.h" > + #include "dt-bindings/input/input.h" > + rotary-encoder0 { > + compatible = "rotary-encoder"; > + gpios = <&gpio 19 GPIO_ACTIVE_LOW>, <&gpio 20 GPIO_ACTIVE_HIGH>; > + linux,axis = <REL_X>; > + rotary-encoder,encoding = "gray"; > + rotary-encoder,relative-axis; > + }; > + rotary-encoder1 { > + compatible = "rotary-encoder"; > + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>, <&gpio 22 GPIO_ACTIVE_HIGH>; > + linux,axis = <ABS_Y>; > + rotary-encoder,encoding = "binary"; > + rotary-encoder,rollover; > + }; > -- > 2.28.0 >
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt deleted file mode 100644 index a644408b33b8..000000000000 --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ /dev/null @@ -1,50 +0,0 @@ -Rotary encoder DT bindings - -Required properties: -- gpios: a spec for at least two GPIOs to be used, most significant first - -Optional properties: -- linux,axis: the input subsystem axis to map to this rotary encoder. - Defaults to 0 (ABS_X / REL_X) -- rotary-encoder,steps: Number of steps in a full turnaround of the - encoder. Only relevant for absolute axis. Defaults to 24 which is a - typical value for such devices. -- rotary-encoder,relative-axis: register a relative axis rather than an - absolute one. Relative axis will only generate +1/-1 events on the input - device, hence no steps need to be passed. -- rotary-encoder,rollover: Automatic rollover when the rotary value becomes - greater than the specified steps or smaller than 0. For absolute axis only. -- rotary-encoder,steps-per-period: Number of steps (stable states) per period. - The values have the following meaning: - 1: Full-period mode (default) - 2: Half-period mode - 4: Quarter-period mode -- wakeup-source: Boolean, rotary encoder can wake up the system. -- rotary-encoder,encoding: String, the method used to encode steps. - Supported are "gray" (the default and more common) and "binary". - -Deprecated properties: -- rotary-encoder,half-period: Makes the driver work on half-period mode. - This property is deprecated. Instead, a 'steps-per-period ' value should - be used, such as "rotary-encoder,steps-per-period = <2>". - -See Documentation/input/devices/rotary-encoder.rst for more information. - -Example: - - rotary@0 { - compatible = "rotary-encoder"; - gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ - linux,axis = <0>; /* REL_X */ - rotary-encoder,encoding = "gray"; - rotary-encoder,relative-axis; - }; - - rotary@1 { - compatible = "rotary-encoder"; - gpios = <&gpio 21 0>, <&gpio 22 0>; - linux,axis = <1>; /* ABS_Y */ - rotary-encoder,steps = <24>; - rotary-encoder,encoding = "binary"; - rotary-encoder,rollover; - }; diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.yaml b/Documentation/devicetree/bindings/input/rotary-encoder.yaml new file mode 100644 index 000000000000..5b60ea86bd62 --- /dev/null +++ b/Documentation/devicetree/bindings/input/rotary-encoder.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/rotary-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Rotary Encoder + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +description: + See Documentation/input/devices/rotary-encoder.rst for more information. + +properties: + compatible: + const: rotary-encoder + + gpios: + minItems: 2 + description: GPIOs for the rotation signals, most significant first + + linux,axis: + description: + The input subsystem axis to map to this rotary encoder. + Defaults to (ABS_X / REL_X). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + rotary-encoder,rollover: + description: + Automatic rollover when the rotary value becomes greater than the + specified steps or smaller than 0. For absolute axis only. + type: boolean + + rotary-encoder,steps-per-period: + description: The values have the following meaning + 1 - Full-period mode + 2 - Half-period mode + 4 - Quarter-period mode + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] + default: 1 + + wakeup-source: + description: Rotary encoder can wake up the system. + type: boolean + + rotary-encoder,encoding: + description: + Method used to encode steps. Gray code is more common. + $ref: /schemas/types.yaml#/definitions/string + enum: ["gray", "binary"] + default: "gray" + + rotary-encoder,half-period: + description: + Deprecated, use "rotary-encoder,steps-per-period = <2>" instead. + type: boolean + deprecated: True + + rotary-encoder,steps: + description: + Number of steps in a full turnaround of the encoder. Only relevant + for absolute axis. Defaults to 24 which is a typical value for such + devices. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 24 + + rotary-encoder,relative-axis: + description: + register a relative axis rather than an absolute one. Relative axis + will only generate +1/-1 events on the input device, hence no steps + need to be passed. + type: boolean + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include "dt-bindings/gpio/gpio.h" + #include "dt-bindings/input/input.h" + rotary-encoder0 { + compatible = "rotary-encoder"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>, <&gpio 20 GPIO_ACTIVE_HIGH>; + linux,axis = <REL_X>; + rotary-encoder,encoding = "gray"; + rotary-encoder,relative-axis; + }; + rotary-encoder1 { + compatible = "rotary-encoder"; + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>, <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,axis = <ABS_Y>; + rotary-encoder,encoding = "binary"; + rotary-encoder,rollover; + };
Convert rotary-encoder bindings to YAML schema. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- .../bindings/input/rotary-encoder.txt | 50 --------- .../bindings/input/rotary-encoder.yaml | 100 ++++++++++++++++++ 2 files changed, 100 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml