diff mbox series

[v2,1/4] dt-bindings: input: Add CP2112 HID USB to SMBus Bridge

Message ID 20230204044313.364-2-kaehndan@gmail.com
State New
Headers show
Series DeviceTree Support for USB-HID Devices and CP2112 | expand

Commit Message

Daniel Kaehn Feb. 4, 2023, 4:43 a.m. UTC
This is a USB HID device which includes an I2C controller and 8 GPIO pins.

The binding allows describing the chip's gpio and i2c controller in DT
using the subnodes named "gpio" and "i2c", respectively. This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.

Signed-off-by: Danny Kaehn <kaehndan@gmail.com>
---
 .../bindings/input/silabs,cp2112.yaml         | 114 ++++++++++++++++++
 1 file changed, 114 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/silabs,cp2112.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/silabs,cp2112.yaml b/Documentation/devicetree/bindings/input/silabs,cp2112.yaml
new file mode 100644
index 000000000000..a8d7f8aea6c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/silabs,cp2112.yaml
@@ -0,0 +1,114 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/silabs,cp2112.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CP2112 HID USB to SMBus/I2C Bridge
+
+maintainers:
+  - Danny Kaehn <kaehndan@gmail.com>
+
+description:
+  The CP2112 is a USB HID device which includes an integrated I2C controller
+  and 8 GPIO pins. Its GPIO pins can each be configured as inputs, open-drain
+  outputs, or push-pull outputs.
+
+properties:
+  compatible:
+    const: usb10c4,ea90
+
+  reg:
+    maxItems: 1
+    description: The USB port number on the host controller
+
+  i2c:
+    description: The SMBus/I2C controller node for the CP2112
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+    properties:
+      clock-frequency:
+        minimum: 10000
+        default: 100000
+        maximum: 400000
+
+  gpio:
+    description: The GPIO controller node for the CP2112
+    $ref: /schemas/gpio/gpio.yaml#
+
+    properties:
+      interrupt-controller: true
+      '#interrupt-cells':
+        const: 2
+
+      gpio-controller: true
+      "#gpio-cells":
+        const: 2
+
+      ngpios:
+        const: 8
+
+    patternProperties:
+      "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+        type: object
+        properties:
+          gpio-hog: true
+          gpios: true
+          input: true
+          output-high: true
+          output-low: true
+          line-name: true
+
+        required:
+          - gpio-hog
+          - gpios
+
+        additionalProperties: false
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      device@1 {
+        compatible = "usb10c4,ea90";
+        reg = <1>;
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          temp@48 {
+            compatible = "national,lm75";
+            reg = <0x48>;
+          };
+        };
+
+        gpio {
+          gpio-controller;
+          interrupt-controller;
+          #gpio-cells = <2>;
+          gpio-line-names =
+            "TEST0",
+            "TEST1",
+            "TEST2",
+            "TEST3",
+            "TEST4",
+            "TEST5",
+            "TEST6",
+            "TEST7";
+        };
+      };
+    };