diff --git a/Documentation/devicetree/bindings/input/touchscreen/syna,s3908.yaml b/Documentation/devicetree/bindings/input/touchscreen/syna,s3908.yaml
new file mode 100644
index 000000000000..1a85747e2f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/syna,s3908.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/synaptics,s3908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics s3908 touchscreen controller
+
+maintainers:
+  - Frieder Hannenheim <frieder.hannenheim@riseup.net>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: syna,s3908
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: reset gpio the chip is connected to.
+
+  vdd-supply: true
+  vcc-supply: true
+
+  max-objects: true
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - vdd-supply
+  - vcc-supply
+  - max-objects
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@48 {
+            compatible = "syna,s3908";
+            reg = <0x48>;
+            interrupt-parent = <&gpa1>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <38 0>;
+            vdd-supply = <&ldo30_reg>;
+            vcc-supply = <&ldo31_reg>;
+
+            max-objects = <10>;
+        };
+    };
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1f8b33c2b03d..eba31ae27391 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -502,6 +502,17 @@ config TOUCHSCREEN_S6SY761
 
 	  To compile this driver as module, choose M here: the
 	  module will be called s6sy761.
+	  
+config TOUCHSCREEN_SYNA_TCM_ONCELL
+	tristate "Synaptics TCM Oncell Touchscreen driver"
+	depends on I2C
+	help
+	  Say Y if you have the Synaptics TCM Oncell driver
+
+	  If unsure, say N
+
+	  To compile this driver as module, choose M here: the
+	  module will be called synaptics_tcm_oncell.
 
 config TOUCHSCREEN_GUNZE
 	tristate "Gunze AHL-51S touchscreen"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7d52592f4290..f5395ccf09d5 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
 obj-$(CONFIG_TOUCHSCREEN_SUN4I)		+= sun4i-ts.o
 obj-$(CONFIG_TOUCHSCREEN_SUR40)		+= sur40.o
 obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI)	+= surface3_spi.o
+obj-$(CONFIG_TOUCHSCREEN_SYNA_TCM_ONCELL)	+= synaptics_tcm_oncell.o
 obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC)	+= ti_am335x_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
diff --git a/drivers/input/touchscreen/synaptics_tcm_oncell.c b/drivers/input/touchscreen/synaptics_tcm_oncell.c
new file mode 100644
index 000000000000..b874287f37af
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics_tcm_oncell.c
@@ -0,0 +1,1104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Driver for Synaptics TCM Oncell Touchscreens
+ *
+ *  Copyright (c) 2024 Frieder Hannenheim <friederhannenheim@riseup.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <asm/unaligned.h>
+#include <linux/delay.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+/* Meta Information */
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Frieder Hannenheim");
+MODULE_DESCRIPTION("A driver for Synaptics TCM Oncell Touchpanels");
+
+#define TOUCHPANEL_DEVICE "syna-tcm"
+
+#define POWERUP_TO_RESET_TIME 10
+#define RESET_TO_NORMAL_TIME 80
+
+#define RESPONSE_TIMEOUT_MS 1000
+
+#define MESSAGE_HEADER_SIZE 4
+#define MESSAGE_MARKER 0xA5
+#define MESSAGE_PADDING 0x5A
+
+#define READ_LENGTH 9
+#define MAX_I2C_RETRY_TIME 4
+
+#define RD_CHUNK_SIZE 0 /* read length limit in bytes, 0 = unlimited */
+#define WR_CHUNK_SIZE 0 /* write length limit in bytes, 0 = unlimited */
+
+#define APP_STATUS_POLL_MS 100
+#define TOUCH_REPORT_CONFIG_SIZE 128
+
+enum command {
+	CMD_NONE = 0x00,
+	CMD_CONTINUE_WRITE = 0x01,
+	CMD_IDENTIFY = 0x02,
+	CMD_RESET = 0x04,
+	CMD_ENABLE_REPORT = 0x05,
+	CMD_DISABLE_REPORT = 0x06,
+	CMD_GET_BOOT_INFO = 0x10,
+	CMD_ERASE_FLASH = 0x11,
+	CMD_WRITE_FLASH = 0x12,
+	CMD_READ_FLASH = 0x13,
+	CMD_RUN_APPLICATION_FIRMWARE = 0x14,
+	CMD_SPI_MASTER_WRITE_THEN_READ = 0x15,
+	CMD_REBOOT_TO_ROM_BOOTLOADER = 0x16,
+	CMD_RUN_BOOTLOADER_FIRMWARE = 0x1f,
+	CMD_GET_APPLICATION_INFO = 0x20,
+	CMD_GET_STATIC_CONFIG = 0x21,
+	CMD_SET_STATIC_CONFIG = 0x22,
+	CMD_GET_DYNAMIC_CONFIG = 0x23,
+	CMD_SET_DYNAMIC_CONFIG = 0x24,
+	CMD_GET_TOUCH_REPORT_CONFIG = 0x25,
+	CMD_SET_TOUCH_REPORT_CONFIG = 0x26,
+	CMD_REZERO = 0x27,
+	CMD_COMMIT_CONFIG = 0x28,
+	CMD_DESCRIBE_DYNAMIC_CONFIG = 0x29,
+	CMD_PRODUCTION_TEST = 0x2a,
+	CMD_SET_CONFIG_ID = 0x2b,
+	CMD_ENTER_DEEP_SLEEP = 0x2c,
+	CMD_EXIT_DEEP_SLEEP = 0x2d,
+	CMD_GET_TOUCH_INFO = 0x2e,
+	CMD_GET_DATA_LOCATION = 0x2f,
+	CMD_DOWNLOAD_CONFIG = 0xc0,
+	CMD_GET_NSM_INFO = 0xc3,
+	CMD_EXIT_ESD = 0xc4,
+};
+
+enum touch_report_code {
+	TOUCH_END = 0,
+	TOUCH_FOREACH_ACTIVE_OBJECT = 1,
+	TOUCH_FOREACH_OBJECT = 2,
+	TOUCH_FOREACH_END = 3,
+	TOUCH_PAD_TO_NEXT_BYTE = 4,
+	TOUCH_TIMESTAMP = 5,
+	TOUCH_OBJECT_N_INDEX = 6,
+	TOUCH_OBJECT_N_CLASSIFICATION = 7,
+	TOUCH_OBJECT_N_X_POSITION = 8,
+	TOUCH_OBJECT_N_Y_POSITION = 9,
+	TOUCH_OBJECT_N_Z = 10,
+	TOUCH_OBJECT_N_X_WIDTH = 11,
+	TOUCH_OBJECT_N_Y_WIDTH = 12,
+	TOUCH_OBJECT_N_TX_POSITION_TIXELS = 13,
+	TOUCH_OBJECT_N_RX_POSITION_TIXELS = 14,
+	TOUCH_0D_BUTTONS_STATE = 15,
+	TOUCH_GESTURE_DOUBLE_TAP = 16,
+	TOUCH_FRAME_RATE = 17,
+	TOUCH_POWER_IM = 18,
+	TOUCH_CID_IM = 19,
+	TOUCH_RAIL_IM = 20,
+	TOUCH_CID_VARIANCE_IM = 21,
+	TOUCH_NSM_FREQUENCY = 22,
+	TOUCH_NSM_STATE = 23,
+	TOUCH_NUM_OF_ACTIVE_OBJECTS = 23,
+	TOUCH_NUM_OF_CPU_CYCLES_USED_SINCE_LAST_FRAME = 24,
+	TOUCH_TUNING_GAUSSIAN_WIDTHS = 0x80,
+	TOUCH_TUNING_SMALL_OBJECT_PARAMS = 0x81,
+	TOUCH_TUNING_0D_BUTTONS_VARIANCE = 0x82,
+	TOUCH_REPORT_GESTURE_SWIPE = 193,
+	TOUCH_REPORT_GESTURE_CIRCLE = 194,
+	TOUCH_REPORT_GESTURE_UNICODE = 195,
+	TOUCH_REPORT_GESTURE_VEE = 196,
+	TOUCH_REPORT_GESTURE_TRIANGLE = 197,
+	TOUCH_REPORT_GESTURE_INFO = 198,
+	TOUCH_REPORT_GESTURE_COORDINATE = 199,
+	TOUCH_REPORT_CUSTOMER_GRIP_INFO = 203,
+};
+
+enum touch_status {
+	LIFT = 0,
+	FINGER = 1,
+	GLOVED_FINGER = 2,
+	NOP = -1,
+};
+
+enum status_code {
+	STATUS_IDLE = 0x00,
+	STATUS_OK = 0x01,
+	STATUS_BUSY = 0x02,
+	STATUS_CONTINUED_READ = 0x03,
+	STATUS_RECEIVE_BUFFER_OVERFLOW = 0x0c,
+	STATUS_PREVIOUS_COMMAND_PENDING = 0x0d,
+	STATUS_NOT_IMPLEMENTED = 0x0e,
+	STATUS_ERROR = 0x0f,
+	STATUS_INVALID = 0xff,
+};
+
+enum report_type {
+	REPORT_IDENTIFY = 0x10,
+	REPORT_TOUCH = 0x11,
+	REPORT_DELTA = 0x12,
+	REPORT_RAW = 0x13,
+	REPORT_DEBUG = 0x14,
+	REPORT_LOG = 0x1d,
+	REPORT_TOUCH_HOLD = 0x20,
+};
+
+enum syna_tcm_oncell_regulators {
+	SYNA_TCM_ONCELL_REGULATOR_VDD,
+	SYNA_TCM_ONCELL_REGULATOR_VCC,
+};
+
+enum boot_mode {
+	MODE_APPLICATION = 0x01,
+	MODE_HOST_DOWNLOAD = 0x02,
+	MODE_BOOTLOADER = 0x0b,
+	MODE_TDDI_BOOTLOADER = 0x0c,
+};
+
+enum app_status {
+	APP_STATUS_OK = 0x00,
+	APP_STATUS_BOOTING = 0x01,
+	APP_STATUS_UPDATING = 0x02,
+	APP_STATUS_BAD_APP_CONFIG = 0xff,
+};
+
+struct syna_tcm_app_info {
+	unsigned char version[2];
+	unsigned char status[2];
+	unsigned char static_config_size[2];
+	unsigned char dynamic_config_size[2];
+	unsigned char app_config_start_write_block[2];
+	unsigned char app_config_size[2];
+	unsigned char max_touch_report_config_size[2];
+	unsigned char max_touch_report_payload_size[2];
+	unsigned char customer_config_id[16];
+	unsigned char max_x[2];
+	unsigned char max_y[2];
+	unsigned char max_objects[2];
+	unsigned char num_of_buttons[2];
+	unsigned char num_of_image_rows[2];
+	unsigned char num_of_image_cols[2];
+	unsigned char has_hybrid_data[2];
+};
+
+struct syna_tcm_identification {
+	unsigned char version;
+	unsigned char mode;
+	unsigned char part_number[16];
+	unsigned char build_id[4];
+	unsigned char max_write_size[2];
+};
+
+struct syna_tcm_message_header {
+	unsigned char marker;
+	unsigned char code;
+	unsigned char length[2];
+};
+
+struct touch_data {
+	unsigned char status;
+	unsigned int x_pos;
+	unsigned int y_pos;
+	unsigned int x_width;
+	unsigned int y_width;
+	unsigned int z;
+};
+
+struct syna_tcm_data {
+	struct i2c_client *client;
+	struct regulator_bulk_data regulators[2];
+	struct input_dev *input;
+	struct gpio_desc *reset_gpio;
+	struct touchscreen_properties prop;
+	struct syna_tcm_identification id_info;
+	struct syna_tcm_app_info app_info;
+
+	unsigned char *response_buf;
+	unsigned int response_length; // Response length including header
+
+	unsigned int app_status;
+
+	unsigned char *report_config;
+	unsigned int report_size;
+
+	bool initialize_done;
+
+	unsigned int touchpanel_max_objects;
+};
+
+DECLARE_COMPLETION(response_complete);
+
+static inline unsigned int le2_to_uint(const unsigned char *src)
+{
+	return (unsigned int)src[0] + (unsigned int)src[1] * 0x100;
+}
+
+static inline unsigned int ceil_div(unsigned int dividend, unsigned int divisor)
+{
+	return (dividend + divisor - 1) / divisor;
+}
+
+static int touch_i2c_continue_read(struct i2c_client *client,
+				   unsigned char *data, unsigned short length)
+{
+	int retval;
+	unsigned char retry;
+	struct i2c_msg msg;
+
+	msg.addr = client->addr;
+	msg.flags = I2C_M_RD;
+	msg.len = length;
+	msg.buf = data;
+
+	for (retry = 0; retry < MAX_I2C_RETRY_TIME; retry++) {
+		if (i2c_transfer(client->adapter, &msg, 1) == 1) {
+			retval = length;
+			break;
+		}
+		msleep(20);
+	}
+	if (retry == MAX_I2C_RETRY_TIME) {
+		pr_warn("%s: I2C read over retry limit\n", __func__);
+		retval = -EIO;
+	}
+	return retval;
+}
+
+static int touch_i2c_continue_write(struct i2c_client *client,
+				    unsigned char *data, unsigned short length)
+{
+	int retval;
+	unsigned char retry;
+	struct i2c_msg msg;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.buf = data;
+	msg.len = length;
+
+	for (retry = 0; retry < MAX_I2C_RETRY_TIME; retry++) {
+		if (i2c_transfer(client->adapter, &msg, 1) == 1) {
+			retval = length;
+			break;
+		}
+		msleep(20);
+	}
+	if (retry == MAX_I2C_RETRY_TIME) {
+		pr_warn("%s: I2C write over retry limit\n", __func__);
+		retval = -EIO;
+	}
+	return retval;
+}
+
+static int syna_tcm_continued_read(struct syna_tcm_data *tcm_info,
+				   unsigned int payload_length,
+				   unsigned char *message_buffer)
+{
+	int retval = 0;
+	unsigned char marker = 0, code = 0;
+	unsigned int total_length = 0, remaining_length = 0;
+	unsigned char *temp_buffer;
+
+	total_length = MESSAGE_HEADER_SIZE + payload_length + 1;
+	remaining_length = total_length - READ_LENGTH;
+
+	temp_buffer = kmalloc(remaining_length + 2, GFP_KERNEL);
+	if (!temp_buffer)
+		return -ENOMEM;
+
+	retval = touch_i2c_continue_read(tcm_info->client, temp_buffer,
+					 remaining_length + 2);
+	if (retval < 0) {
+		pr_warn("touch_i2c_continue_read failed");
+		return retval;
+	}
+
+	marker = temp_buffer[0];
+	code = temp_buffer[1];
+
+	if (marker != MESSAGE_MARKER) {
+		pr_warn("incorrect header marker (0x%02x)\n", marker);
+		return -EIO;
+	}
+
+	if (code != STATUS_CONTINUED_READ) {
+		pr_warn("incorrect header code (0x%02x)\n", code);
+		return -EIO;
+	}
+
+	memcpy(&message_buffer[READ_LENGTH], &temp_buffer[2], remaining_length);
+	message_buffer[total_length - 1] = MESSAGE_PADDING;
+	kfree(temp_buffer);
+
+	return 0;
+}
+
+/**
+ * syna_tcm_raw_write() - write command/data to device without receiving
+ * response
+ *
+ * @tcm_info: handle of core module
+ * @command: command to send to device
+ * @data: data to send to device
+ * @length: length of data in bytes
+ * @add_length: wether the length of the message should be added after the command
+ *
+ * A command and its data, if any, are sent to the device.
+ */
+static int syna_tcm_raw_write(struct syna_tcm_data *tcm_info,
+			      unsigned char command, unsigned char *data,
+			      unsigned int length, bool add_length)
+{
+	int retval = 0;
+	unsigned char *out_buf;
+
+	unsigned int header_size = add_length && length ? 3 : 1;
+
+	out_buf = kmalloc(length + header_size, GFP_KERNEL);
+	if (retval < 0)
+		return retval;
+
+	out_buf[0] = command;
+	if (add_length && length) {
+		out_buf[1] = (unsigned char)length;
+		out_buf[2] = (unsigned char)(length >> 8);
+	}
+
+	if (length)
+		memcpy(&out_buf[header_size], data, length);
+
+	retval = touch_i2c_continue_write(tcm_info->client, out_buf,
+					  length + header_size);
+	if (retval < 0) {
+		kfree(out_buf);
+		return retval;
+	}
+
+	kfree(out_buf);
+	return 0;
+}
+
+/**
+ * syna_tcm_read_message() - read message from device
+ *
+ * @tcm_info: handle of core module
+ * @length: length of data in bytes in raw read mode
+ */
+static int syna_tcm_read_message(struct syna_tcm_data *tcm_info,
+				 unsigned int length)
+{
+	int retval = 0;
+	unsigned int total_length = 0, payload_length = 0;
+	unsigned char *message_buffer;
+	struct syna_tcm_message_header *header = NULL;
+
+	message_buffer = kmalloc(READ_LENGTH, GFP_KERNEL);
+	if (!message_buffer)
+		return -ENOMEM;
+
+	retval = touch_i2c_continue_read(tcm_info->client, message_buffer,
+					 READ_LENGTH);
+	if (retval < 0)
+		return retval;
+
+	header = (struct syna_tcm_message_header *)message_buffer;
+	if (header->marker != MESSAGE_MARKER) {
+		pr_warn("wrong header marker:0x%02x\n", header->marker);
+		return -ENXIO;
+	}
+
+	unsigned char report_code = header->code;
+
+	payload_length = le2_to_uint(header->length);
+
+	if (report_code <= STATUS_ERROR || report_code == STATUS_INVALID) {
+		switch (report_code) {
+		case STATUS_OK:
+			break;
+		case STATUS_CONTINUED_READ:
+		case STATUS_IDLE:
+		case STATUS_BUSY:
+			payload_length = 0;
+			kfree(message_buffer);
+			return 0;
+		default:
+			if (report_code != STATUS_ERROR) {
+				pr_warn("IO ERROR");
+				kfree(message_buffer);
+				return -EIO;
+			}
+		}
+	}
+
+	total_length = MESSAGE_HEADER_SIZE + payload_length + 1;
+
+	unsigned char *temp_buffer = message_buffer;
+
+	message_buffer = kmalloc(total_length, GFP_KERNEL);
+	if (!message_buffer)
+		return -ENOMEM;
+
+	// Copy data already read to message_buffer
+	memcpy(message_buffer, temp_buffer, READ_LENGTH);
+	kfree(temp_buffer);
+
+	if (payload_length == 0) {
+		message_buffer[total_length - 1] = MESSAGE_PADDING;
+		goto check_padding;
+	}
+
+	if (MESSAGE_HEADER_SIZE + payload_length > READ_LENGTH) {
+		retval = syna_tcm_continued_read(tcm_info, payload_length,
+						 message_buffer);
+		if (retval < 0) {
+			pr_warn("failed to do continued read\n");
+			return retval;
+		};
+	}
+
+check_padding:
+	if (message_buffer[total_length - 1] != MESSAGE_PADDING) {
+		pr_warn("missing message padding");
+		return -EIO;
+	}
+
+	if (tcm_info->response_buf != NULL)
+		kfree(tcm_info->response_buf);
+
+	tcm_info->response_buf = message_buffer;
+	tcm_info->response_length = total_length;
+
+	return 0;
+}
+
+static int syna_tcm_write_message(struct syna_tcm_data *tcm_info,
+				  unsigned char command, unsigned char *payload,
+				  unsigned int length, unsigned char **resp_buf,
+				  unsigned int *resp_length)
+{
+	int retval = 0;
+
+	if (resp_buf == NULL) {
+		retval = syna_tcm_raw_write(tcm_info, command, payload, length,
+					    false);
+		goto exit;
+	}
+	reinit_completion(&response_complete);
+
+	tcm_info->response_buf = *resp_buf;
+	tcm_info->response_length = *resp_length;
+
+	// Here write command to device
+	retval = syna_tcm_raw_write(tcm_info, command, payload, length, true);
+	if (retval != 0)
+		goto exit;
+
+	retval = wait_for_completion_timeout(&response_complete,
+					     RESPONSE_TIMEOUT_MS);
+	if (retval == 0) {
+		pr_warn("timed out waiting for response (command 0x%02x)\n",
+			command);
+		retval = -EIO;
+	}
+
+exit:
+	if (tcm_info->response_length < 0)
+		return -1;
+	if (resp_buf != NULL) {
+		*resp_buf = tcm_info->response_buf;
+		*resp_length = tcm_info->response_length;
+	}
+
+	return retval;
+}
+
+static int syna_tcm_set_normal_report_config(struct syna_tcm_data *tcm_info)
+{
+	int retval;
+	unsigned int idx = 0;
+	unsigned int length;
+
+	length = le2_to_uint(tcm_info->app_info.max_touch_report_config_size);
+
+	if (length < TOUCH_REPORT_CONFIG_SIZE) {
+		pr_warn("invalid maximum touch report config size: %d\n",
+			length);
+		return -EINVAL;
+	}
+
+	unsigned char *report_buf = kmalloc(length, GFP_KERNEL);
+
+	if (!report_buf)
+		return -ENOMEM;
+
+	report_buf[idx++] = TOUCH_FOREACH_ACTIVE_OBJECT;
+	report_buf[idx++] = TOUCH_OBJECT_N_INDEX;
+	report_buf[idx++] = 4;
+	report_buf[idx++] = TOUCH_OBJECT_N_CLASSIFICATION;
+	report_buf[idx++] = 4;
+	report_buf[idx++] = TOUCH_OBJECT_N_X_POSITION;
+	report_buf[idx++] = 16;
+	report_buf[idx++] = TOUCH_OBJECT_N_Y_POSITION;
+	report_buf[idx++] = 16;
+	report_buf[idx++] = TOUCH_OBJECT_N_X_WIDTH;
+	report_buf[idx++] = 12;
+	report_buf[idx++] = TOUCH_OBJECT_N_Y_WIDTH;
+	report_buf[idx++] = 12;
+	report_buf[idx++] = TOUCH_FOREACH_END;
+	report_buf[idx++] = TOUCH_END;
+
+	unsigned char *resp_buf = NULL;
+	unsigned int resp_length = 0;
+
+	retval = syna_tcm_write_message(tcm_info, CMD_SET_TOUCH_REPORT_CONFIG,
+					report_buf, length, &resp_buf,
+					&resp_length);
+	if (retval < 0) {
+		pr_warn("failed to set report config");
+		return retval;
+	}
+
+	kfree(resp_buf);
+
+	return retval;
+}
+
+static int syna_tcm_get_report_config(struct syna_tcm_data *tcm_info)
+{
+	int retval;
+	unsigned char *resp_buf = NULL;
+	unsigned int resp_length = 0;
+
+	retval = syna_tcm_write_message(tcm_info, CMD_GET_TOUCH_REPORT_CONFIG,
+					NULL, 0, &resp_buf, &resp_length);
+	if (retval < 0) {
+		pr_warn("failed to write command 0x%02x\n",
+			CMD_GET_TOUCH_REPORT_CONFIG);
+		return retval;
+	}
+
+	tcm_info->report_size = resp_length - MESSAGE_HEADER_SIZE - 1;
+
+	kfree(tcm_info->report_config);
+	tcm_info->report_config = kmalloc(tcm_info->report_size, GFP_KERNEL);
+
+	memcpy(tcm_info->report_config, &resp_buf[MESSAGE_HEADER_SIZE],
+	       tcm_info->report_size);
+
+	return 0;
+}
+
+static int syna_tcm_get_app_info(struct syna_tcm_data *tcm_info)
+{
+	int retval = 0;
+	unsigned char *resp_buf = NULL;
+	unsigned int resp_length = 0;
+	unsigned int timeout = RESPONSE_TIMEOUT_MS;
+
+get_app_info:
+	retval = syna_tcm_write_message(tcm_info, CMD_GET_APPLICATION_INFO,
+					NULL, 0, &resp_buf, &resp_length);
+	if (retval < 0) {
+		pr_warn("failed to write command 0x%02x\n",
+			CMD_GET_APPLICATION_INFO);
+		goto exit;
+	}
+
+	memcpy(&tcm_info->app_info, &resp_buf[MESSAGE_HEADER_SIZE],
+	       sizeof(tcm_info->app_info));
+
+	tcm_info->app_status = le2_to_uint(tcm_info->app_info.status);
+
+	if (tcm_info->app_status == APP_STATUS_BOOTING ||
+	    tcm_info->app_status == APP_STATUS_UPDATING) {
+		if (timeout > 0) {
+			msleep(APP_STATUS_POLL_MS);
+			timeout -= APP_STATUS_POLL_MS;
+			goto get_app_info;
+		}
+	}
+
+	retval = 0;
+
+exit:
+	kfree(resp_buf);
+
+	return retval;
+}
+
+static int syna_tcm_identify(struct syna_tcm_data *tcm_info)
+{
+	int retval = 0;
+	unsigned char *resp_buf = NULL;
+	unsigned int resp_length = 0;
+
+	retval = syna_tcm_write_message(tcm_info, CMD_IDENTIFY, NULL, 0,
+					&resp_buf, &resp_length);
+	if (retval < 0)
+		goto exit;
+
+	memcpy(&tcm_info->id_info, &resp_buf[MESSAGE_HEADER_SIZE],
+	       sizeof(tcm_info->id_info));
+
+	if (tcm_info->id_info.mode == MODE_APPLICATION)
+		retval = syna_tcm_get_app_info(tcm_info);
+
+exit:
+	kfree(resp_buf);
+
+	return retval;
+}
+
+static int syna_tcm_run_application_firmware(struct syna_tcm_data *tcm_info)
+{
+	int retval = 0;
+	unsigned int retry = 3;
+	unsigned char *resp_buf = NULL;
+	unsigned int resp_length = 0;
+
+retry:
+	retval = syna_tcm_write_message(tcm_info, CMD_RUN_APPLICATION_FIRMWARE,
+					NULL, 0, &resp_buf, &resp_length);
+
+	if (retval < 0) {
+		if (retry--)
+			goto retry;
+		goto exit;
+	}
+
+	retval = syna_tcm_identify(tcm_info);
+	if (retval < 0) {
+		if (retry--)
+			goto retry;
+		goto exit;
+	}
+
+	pr_info("syna_tcm: boot_mode: 0x%02x", tcm_info->id_info.mode);
+
+	if (tcm_info->id_info.mode != MODE_APPLICATION) {
+		if (retry--)
+			goto retry;
+		retval = -EINVAL;
+		goto exit;
+	} else if (tcm_info->app_status != APP_STATUS_OK) {
+		pr_warn("syna_tcm: application status = 0x%02x\n",
+			tcm_info->app_status);
+		if (retry--)
+			goto retry;
+	}
+
+	retval = 0;
+
+exit:
+	kfree(resp_buf);
+
+	return retval;
+}
+
+/*
+ * syna_get_report_data - Retrieve data from touch report
+ *
+ * @tcm_info: handle of tcm module
+ * @offset: start bit of retrieved data
+ * @bits: total bits of retrieved data
+ * @data: pointer of data, at most 4 byte
+ * Retrieve data from the touch report based on the bit offset and bit length
+ * information from the touch report configuration.
+ */
+static int syna_tcm_get_report_data(unsigned char *report_buf,
+				    unsigned int report_buf_length,
+				    unsigned int offset, unsigned int num_bits,
+				    unsigned int *data)
+{
+	unsigned char mask = 0;
+	unsigned char byte_data = 0;
+	unsigned int output_data = 0;
+	unsigned int bit_offset = offset % 8;
+	unsigned int byte_offset = offset / 8;
+	unsigned int data_bits = 0;
+	unsigned int available_bits = 0;
+	unsigned int remaining_bits = num_bits;
+
+	if (num_bits == 0 || num_bits > 32) {
+		pr_warn("report value larger than 32 bits: %d\n", num_bits);
+		memcpy(data, &report_buf[byte_offset], num_bits / 8);
+		return 0;
+	}
+
+	if ((offset + num_bits) > report_buf_length * 8) {
+		pr_warn("report: offset and bits beyond total read length: %d vs %d bits",
+			offset + num_bits, report_buf_length * 8);
+		*data = 0;
+		return -1;
+	}
+
+	while (remaining_bits) {
+		byte_data = report_buf[byte_offset];
+		byte_data >>= bit_offset;
+
+		available_bits = 8 - bit_offset;
+		data_bits = available_bits < remaining_bits ? available_bits :
+							      remaining_bits;
+		mask = 0xff >> (8 - data_bits);
+
+		byte_data &= mask;
+
+		output_data |= byte_data << (num_bits - remaining_bits);
+
+		bit_offset = 0;
+		byte_offset += 1;
+		remaining_bits -= data_bits;
+	}
+
+	*data = output_data;
+
+	return 0;
+}
+
+static int syna_tcm_parse_touch_report(struct syna_tcm_data *tcm_info)
+{
+	int config_data_pointer = 0, obj = 0, foreach_start = 0, foreach_end,
+	    retval;
+	unsigned int offset = 0, num_bits, data = 0;
+	unsigned char *report_config = tcm_info->report_config;
+	unsigned int config_size = tcm_info->report_size;
+
+	unsigned char *report = &tcm_info->response_buf[MESSAGE_HEADER_SIZE];
+	unsigned int report_size =
+		tcm_info->response_length - MESSAGE_HEADER_SIZE - 1;
+	unsigned char code;
+
+	struct touch_data *touch_data =
+		kmalloc(sizeof(touch_data) * tcm_info->touchpanel_max_objects,
+			GFP_KERNEL);
+	memset(touch_data, 0,
+	       sizeof(touch_data) * tcm_info->touchpanel_max_objects);
+
+	while (config_data_pointer < config_size) {
+		code = report_config[config_data_pointer++];
+		switch (code) {
+		case TOUCH_END:
+			goto exit;
+		case TOUCH_FOREACH_ACTIVE_OBJECT:
+			obj = 0;
+			foreach_start = config_data_pointer;
+			if (offset >= report_size * 8)
+				goto exit;
+			break;
+		case TOUCH_FOREACH_END:
+			foreach_end = config_data_pointer;
+			if (offset < report_size * 8)
+				config_data_pointer = foreach_start;
+			break;
+		// Ignored
+		case TOUCH_OBJECT_N_TX_POSITION_TIXELS:
+		case TOUCH_OBJECT_N_RX_POSITION_TIXELS:
+		case TOUCH_FRAME_RATE:
+		case TOUCH_0D_BUTTONS_STATE:
+		case 30: // I don't know what command 30 is and it isn't in the downstream driver. After it comes a length of 8 bits and this is ignored
+			num_bits = report_config[config_data_pointer++];
+			offset += num_bits;
+			break;
+		case TOUCH_PAD_TO_NEXT_BYTE:
+			offset = ceil_div(offset, 8) * 8;
+			break;
+		case TOUCH_OBJECT_N_INDEX:
+			num_bits = report_config[config_data_pointer++];
+			retval = syna_tcm_get_report_data(
+				report, report_size, offset, num_bits, &obj);
+			if (retval < 0) {
+				pr_warn("failed to get object index\n");
+				return retval;
+			}
+			offset += num_bits;
+			break;
+		case TOUCH_OBJECT_N_CLASSIFICATION:
+			num_bits = report_config[config_data_pointer++];
+			retval = syna_tcm_get_report_data(
+				report, report_size, offset, num_bits, &data);
+			if (retval < 0) {
+				pr_warn("failed to get object classification\n");
+				return retval;
+			}
+			if (obj >= tcm_info->touchpanel_max_objects) {
+				pr_warn("too many objects\n");
+				return -1;
+			}
+			touch_data[obj].status = data;
+			offset += num_bits;
+			break;
+		case TOUCH_OBJECT_N_X_POSITION:
+			num_bits = report_config[config_data_pointer++];
+			retval = syna_tcm_get_report_data(
+				report, report_size, offset, num_bits, &data);
+			if (retval < 0) {
+				pr_warn("failed to get object x position\n");
+				return retval;
+			}
+			touch_data[obj].x_pos = data;
+			offset += num_bits;
+			break;
+		case TOUCH_OBJECT_N_Y_POSITION:
+			num_bits = report_config[config_data_pointer++];
+			retval = syna_tcm_get_report_data(
+				report, report_size, offset, num_bits, &data);
+			if (retval < 0) {
+				pr_warn("failed to get object y position\n");
+				return retval;
+			}
+			touch_data[obj].y_pos = data;
+			offset += num_bits;
+			break;
+		case TOUCH_OBJECT_N_Z:
+			num_bits = report_config[config_data_pointer++];
+			retval = syna_tcm_get_report_data(
+				report, report_size, offset, num_bits, &data);
+			if (retval < 0) {
+				pr_warn("failed to get object z\n");
+				return retval;
+			}
+			touch_data[obj].z = data;
+			offset += num_bits;
+			break;
+		case TOUCH_OBJECT_N_X_WIDTH:
+			num_bits = report_config[config_data_pointer++];
+			retval = syna_tcm_get_report_data(
+				report, report_size, offset, num_bits, &data);
+			if (retval < 0) {
+				pr_warn("failed to get object x width\n");
+				return retval;
+			}
+			touch_data[obj].x_width = data;
+			offset += num_bits;
+			break;
+		case TOUCH_OBJECT_N_Y_WIDTH:
+			num_bits = report_config[config_data_pointer++];
+			retval = syna_tcm_get_report_data(
+				report, report_size, offset, num_bits, &data);
+			if (retval < 0) {
+				pr_warn("failed to get object y width\n");
+				return retval;
+			}
+			touch_data[obj].y_width = data;
+			offset += num_bits;
+			break;
+		default:
+			pr_notice("unrecognized touch report config code: %d",
+				  code);
+		}
+	}
+
+exit:
+	for (int i = 0; i < tcm_info->touchpanel_max_objects; i++) {
+		if (touch_data[i].status == NOP)
+			continue;
+
+		bool lift = touch_data[i].status == LIFT ? true : false;
+
+		input_mt_slot(tcm_info->input, i);
+		input_mt_report_slot_state(tcm_info->input, MT_TOOL_FINGER,
+					   !lift);
+
+		int x_width = touch_data[i].x_width;
+		int y_width = touch_data[i].y_width;
+		int major_width = x_width > y_width ? x_width : y_width;
+		int minor_width = x_width > y_width ? y_width : x_width;
+		int x_is_major = x_width > y_width ? true : false;
+
+		if (!lift) {
+			input_report_abs(tcm_info->input, ABS_MT_POSITION_X,
+					 touch_data[i].x_pos);
+			input_report_abs(tcm_info->input, ABS_MT_POSITION_Y,
+					 touch_data[i].y_pos);
+			input_report_abs(tcm_info->input, ABS_MT_TOUCH_MAJOR,
+					 major_width);
+			input_report_abs(tcm_info->input, ABS_MT_TOUCH_MINOR,
+					 minor_width);
+			input_report_abs(tcm_info->input, ABS_MT_ORIENTATION,
+					 x_is_major);
+			input_report_abs(tcm_info->input, ABS_MT_PRESSURE,
+					 touch_data[i].z);
+		}
+
+		input_sync(tcm_info->input);
+	}
+
+	kfree(touch_data);
+	return 0;
+}
+
+static irqreturn_t syna_irq_handler(int irq, void *dev)
+{
+	int retval;
+	struct syna_tcm_data *tcm_info = dev;
+
+	retval = syna_tcm_read_message(tcm_info, 0);
+	if (retval < 0) {
+		tcm_info->response_length = -1;
+		goto exit;
+	}
+
+	if (tcm_info->response_buf[1] == REPORT_TOUCH)
+		syna_tcm_parse_touch_report(tcm_info);
+
+exit:
+	if (tcm_info->response_buf[1] <= REPORT_IDENTIFY)
+		complete(&response_complete);
+
+	return IRQ_HANDLED;
+}
+
+static int syna_tcm_power_on(struct syna_tcm_data *tcm_info)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(tcm_info->regulators),
+				    tcm_info->regulators);
+	if (ret)
+		return ret;
+
+	gpiod_set_value(tcm_info->reset_gpio, false);
+	msleep(POWERUP_TO_RESET_TIME);
+	gpiod_set_value(tcm_info->reset_gpio, true);
+	msleep(RESET_TO_NORMAL_TIME);
+
+	return 0;
+}
+
+static int syna_tcm_probe(struct i2c_client *client)
+{
+	struct syna_tcm_data *tcm_info;
+	int err;
+
+	pr_info("starting probe for syna_tcm_oncell touchscreen");
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE_DATA |
+					     I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -ENODEV;
+
+	tcm_info = devm_kzalloc(&client->dev, sizeof(*tcm_info), GFP_KERNEL);
+	if (!tcm_info)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tcm_info);
+	tcm_info->client = client;
+	tcm_info->response_buf = NULL;
+
+	of_property_read_u32(client->dev.of_node, "max-objects",
+			     &tcm_info->touchpanel_max_objects);
+
+	tcm_info->reset_gpio =
+		gpiod_get_index(&client->dev, "reset", 0, GPIOD_OUT_HIGH);
+
+	tcm_info->regulators[SYNA_TCM_ONCELL_REGULATOR_VDD].supply = "vdd";
+	tcm_info->regulators[SYNA_TCM_ONCELL_REGULATOR_VCC].supply = "vcc";
+	err = devm_regulator_bulk_get(&client->dev,
+				      ARRAY_SIZE(tcm_info->regulators),
+				      tcm_info->regulators);
+	if (err)
+		return err;
+
+	// TODO: uncomment once syna_tcm_power_off is implemented
+	// err = devm_add_action_or_reset(&client->dev, syna_tcm_oncell_power_off, tcm_info);
+	// if (err)
+	//     return err;
+
+	err = syna_tcm_power_on(tcm_info);
+	if (err < 0)
+		return err;
+
+	// This needs to happen before the first write to the device
+	err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					syna_irq_handler,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"syna_tcm_oncell_irq", tcm_info);
+	if (err)
+		return err;
+
+	err = syna_tcm_run_application_firmware(tcm_info);
+	if (err < 0)
+		return err;
+
+	// err = syna_tcm_set_normal_report_config(tcm_info);
+	// if (err < 0)
+		// pr_err("syna_tcm: failed to set normal touch report config")
+
+	err = syna_tcm_get_report_config(tcm_info);
+	if (err < 0)
+		return err;
+
+	tcm_info->input = devm_input_allocate_device(&client->dev);
+	if (!tcm_info->input)
+		return -ENOMEM;
+
+	tcm_info->input->name = TOUCHPANEL_DEVICE;
+	tcm_info->input->id.bustype = BUS_I2C;
+
+	input_set_abs_params(tcm_info->input, ABS_MT_POSITION_X, 0,
+			     le2_to_uint(tcm_info->app_info.max_x), 0, 0);
+	input_set_abs_params(tcm_info->input, ABS_MT_POSITION_Y, 0,
+			     le2_to_uint(tcm_info->app_info.max_y), 0, 0);
+	input_set_abs_params(tcm_info->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+	input_set_abs_params(tcm_info->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
+	input_set_abs_params(tcm_info->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+	touchscreen_parse_properties(tcm_info->input, true, &tcm_info->prop);
+
+	err = input_mt_init_slots(tcm_info->input,
+				  tcm_info->touchpanel_max_objects,
+				  INPUT_MT_DIRECT);
+	if (err)
+		return err;
+
+	input_set_drvdata(tcm_info->input, tcm_info);
+
+	err = input_register_device(tcm_info->input);
+	if (err)
+		return err;
+
+	pr_info("syna_tcm: probe done");
+	tcm_info->initialize_done = true;
+
+	return 0;
+}
+
+static const struct of_device_id syna_driver_ids[] = {
+	{
+		.compatible = "syna,s3908",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, syna_driver_ids);
+
+static const struct i2c_device_id syna_i2c_ids[] = { { TOUCHPANEL_DEVICE, 0 },
+						     {} };
+MODULE_DEVICE_TABLE(i2c, syna_i2c_ids);
+
+// static const struct dev_pm_ops syna_pm_ops = {
+//     .suspend = syna_i2c_suspend,
+//     .resume = syna_i2c_resume,
+// };
+
+static struct i2c_driver syna_i2c_driver = {
+	.probe	= syna_tcm_probe,
+	// .remove	   = syna_i2c_remove,
+	// .shutdown   = syna_tp_shutdown,
+	.id_table	= syna_i2c_ids,
+	.driver	= {
+	.name	= TOUCHPANEL_DEVICE,
+	.of_match_table = syna_driver_ids,
+		// .pm = &syna_pm_ops,
+	},
+};
+
+module_i2c_driver(syna_i2c_driver);
