From patchwork Fri Aug 9 07:57:38 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 818185 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3FE2CC8D1; Fri, 9 Aug 2024 08:13:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723191200; cv=none; b=Fj15bMpZw8gOIpzFBJrtkmc/1IMbzqXmN52q485QDkkn416+iAFEa6XViVYak4z5VxbpzAEEEmR58CyH9+fpiC60E+aNGojEuMXP6CWYJ7AvzBaX6zeAmWlciQj7fgcAN7yD/3XItO4HVSB3xevW32jkh1ToWSSQ9sxeM55D79g= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723191200; c=relaxed/simple; bh=8IMuCRIbvNizK/h6NMBxHHHNlT5Tmg+x2to3+1ed8Mw=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=WAjAwSwMssdE+2MRBE7XqP9i5a/cvusB87JZcTjDOZ5g06Tzi/waHHvZpBU3ZSQwdtD5UsYsPCDPn3JxWMrldHNdHHNcyGthWnrPo7HP+QJSFX02JWYlHbE5fSJ6lVySyIaeIy7n50tIxseFQr4vFytsaK9wZpRh3E1rTukOiy8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 Received: by smtp.kernel.org (Postfix) with ESMTPSA id ACE52C32782; Fri, 9 Aug 2024 08:13:18 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: linux-input@vger.kernel.org, Hans Verkuil Subject: [PATCH 6/6] media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver Date: Fri, 9 Aug 2024 09:57:38 +0200 Message-ID: X-Mailer: git-send-email 2.43.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add support for the Extron DA HD 4K Plus series of 4K HDMI Distrubution Amplifiers (aka HDMI Splitters). These devices support CEC and this driver adds support for the CEC protocol for both the input and all outputs (2, 4 or 6 outputs, depending on the model). It also exports the EDID from the outputs and allows reading and setting the EDID of the input. Signed-off-by: Hans Verkuil --- Documentation/admin-guide/media/cec.rst | 87 + MAINTAINERS | 7 + drivers/media/cec/usb/Kconfig | 1 + drivers/media/cec/usb/Makefile | 1 + .../cec/usb/extron-da-hd-4k-plus/Kconfig | 14 + .../cec/usb/extron-da-hd-4k-plus/Makefile | 8 + .../usb/extron-da-hd-4k-plus/cec-splitter.c | 657 ++++++ .../usb/extron-da-hd-4k-plus/cec-splitter.h | 51 + .../extron-da-hd-4k-plus.c | 1836 +++++++++++++++++ .../extron-da-hd-4k-plus.h | 118 ++ 10 files changed, 2780 insertions(+) create mode 100644 drivers/media/cec/usb/extron-da-hd-4k-plus/Kconfig create mode 100644 drivers/media/cec/usb/extron-da-hd-4k-plus/Makefile create mode 100644 drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.c create mode 100644 drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.h create mode 100644 drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.c create mode 100644 drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.h diff --git a/Documentation/admin-guide/media/cec.rst b/Documentation/admin-guide/media/cec.rst index 6b30e355cf23..92690e1f2183 100644 --- a/Documentation/admin-guide/media/cec.rst +++ b/Documentation/admin-guide/media/cec.rst @@ -42,10 +42,14 @@ dongles): ``persistent_config``: by default this is off, but when set to 1 the driver will store the current settings to the device's internal eeprom and restore it the next time the device is connected to the USB port. + - RainShadow Tech. Note: this driver does not support the persistent_config module option of the Pulse-Eight driver. The hardware supports it, but I have no plans to add this feature. But I accept patches :-) +- Extron DA HD 4K PLUS HDMI Distribution Amplifier. See + :ref:`extron_da_hd_4k_plus` for more information. + Miscellaneous: - vivid: emulates a CEC receiver and CEC transmitter. @@ -378,3 +382,86 @@ it later using ``--analyze-pin``. You can also use this as a full-fledged CEC device by configuring it using ``cec-ctl --tv -p0.0.0.0`` or ``cec-ctl --playback -p1.0.0.0``. + +.. _extron_da_hd_4k_plus: + +Extron DA HD 4K PLUS CEC Adapter driver +======================================= + +This driver is for the Extron DA HD 4K PLUS series of HDMI Distribution +Amplifiers: https://www.extron.com/product/dahd4kplusseries + +The 2, 4 and 6 port models are supported. + +Firmware version 1.02.0001 or higher is required. + +Note that older Extron hardware revisions have a problem with the CEC voltage, +which may mean that CEC will not work. This is fixed in hardware revisions +E34814 and up. + +The CEC support has two modes: the first is a manual mode where userspace has +to manually control CEC for the HDMI Input and all HDMI Outputs. While this gives +full control, it is also complicated. + +The second mode is an automatic mode, which is selected if the module option +``vendor_id`` is set. In that case the driver controls CEC and CEC messages +received in the input will be distributed to the outputs. It is still possible +to use the /dev/cecX devices to talk to the connected devices directly, but it is +the driver that configures everything and deals with things like Hotplug Detect +changes. + +The driver also takes care of the EDIDs: /dev/videoX devices are created to +read the EDIDs and (for the HDMI Input port) to set the EDID. + +By default userspace is responsible to set the EDID for the HDMI Input +according to the EDIDs of the connected displays. But if the ``manufacturer_name`` +module option is set, then the driver will take care of setting the EDID +of the HDMI Input based on the supported resolutions of the connected displays. +Currently the driver only supports resolutions 1080p60 and 4kp60: if all connected +displays support 4kp60, then it will advertise 4kp60 on the HDMI input, otherwise +it will fall back to an EDID that just reports 1080p60. + +The status of the Extron is reported in ``/sys/kernel/debug/cec/cecX/status``. + +The extron-da-hd-4k-plus driver implements the following module options: + +``debug`` +--------- + +If set to 1, then all serial port traffic is shown. + +``vendor_id`` +------------- + +The CEC Vendor ID to report to connected displays. + +If set, then the driver will take care of distributing CEC messages received +on the input to the HDMI outputs. This is done for the following CEC messages: + +- +- and +- +- +- + +If not set, then userspace is responsible for this, and it will have to +configure the CEC devices for HDMI Input and the HDMI Outputs manually. + +``manufacturer_name`` +--------------------- + +A three character manufacturer name that is used in the EDID for the HDMI +Input. If not set, then userspace is reponsible for configuring an EDID. +If set, then the driver will update the EDID automatically based on the +resolutions supported by the connected displays, and it will not be possible +anymore to manually set the EDID for the HDMI Input. + +``hpd_never_low`` +----------------- + +If set, then the Hotplug Detect pin of the HDMI Input will always be high, +even if nothing is connected to the HDMI Outputs. If not set (the default) +then the Hotplug Detect pin of the HDMI input will go low if all the detected +Hotplug Detect pins of the HDMI Outputs are also low. + +This option may be changed dynamically. diff --git a/MAINTAINERS b/MAINTAINERS index 8766f3e5e87e..4f16b0a3a0f9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8461,6 +8461,13 @@ F: lib/bootconfig.c F: tools/bootconfig/* F: tools/bootconfig/scripts/* +EXTRON DA HD 4K PLUS CEC DRIVER +M: Hans Verkuil +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: drivers/media/cec/usb/extron-da-hd-4k-plus/ + EXYNOS DP DRIVER M: Jingoo Han L: dri-devel@lists.freedesktop.org diff --git a/drivers/media/cec/usb/Kconfig b/drivers/media/cec/usb/Kconfig index 3f3a5c75287a..6faf4742981d 100644 --- a/drivers/media/cec/usb/Kconfig +++ b/drivers/media/cec/usb/Kconfig @@ -3,6 +3,7 @@ # USB drivers if USB_SUPPORT && TTY +source "drivers/media/cec/usb/extron-da-hd-4k-plus/Kconfig" source "drivers/media/cec/usb/pulse8/Kconfig" source "drivers/media/cec/usb/rainshadow/Kconfig" endif diff --git a/drivers/media/cec/usb/Makefile b/drivers/media/cec/usb/Makefile index e4183d1bfa9a..c082679f5318 100644 --- a/drivers/media/cec/usb/Makefile +++ b/drivers/media/cec/usb/Makefile @@ -2,5 +2,6 @@ # # Makefile for the CEC USB device drivers. # +obj-$(CONFIG_USB_EXTRON_DA_HD_4K_PLUS_CEC) += extron-da-hd-4k-plus/ obj-$(CONFIG_USB_PULSE8_CEC) += pulse8/ obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow/ diff --git a/drivers/media/cec/usb/extron-da-hd-4k-plus/Kconfig b/drivers/media/cec/usb/extron-da-hd-4k-plus/Kconfig new file mode 100644 index 000000000000..5354f0eebe5c --- /dev/null +++ b/drivers/media/cec/usb/extron-da-hd-4k-plus/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +config USB_EXTRON_DA_HD_4K_PLUS_CEC + tristate "Extron DA HD 4K Plus CEC driver" + depends on VIDEO_DEV + depends on USB + depends on USB_ACM + select CEC_CORE + select SERIO + select SERIO_SERPORT + help + This is a CEC driver for the Extron DA HD 4K Plus HDMI Splitter. + + To compile this driver as a module, choose M here: the + module will be called extron-da-hd-4k-plus-cec. diff --git a/drivers/media/cec/usb/extron-da-hd-4k-plus/Makefile b/drivers/media/cec/usb/extron-da-hd-4k-plus/Makefile new file mode 100644 index 000000000000..2e8f7f60263f --- /dev/null +++ b/drivers/media/cec/usb/extron-da-hd-4k-plus/Makefile @@ -0,0 +1,8 @@ +extron-da-hd-4k-plus-cec-objs := extron-da-hd-4k-plus.o cec-splitter.o +obj-$(CONFIG_USB_EXTRON_DA_HD_4K_PLUS_CEC) := extron-da-hd-4k-plus-cec.o + +all: + $(MAKE) -C $(KDIR) M=$(shell pwd) modules + +install: + $(MAKE) -C $(KDIR) M=$(shell pwd) modules_install diff --git a/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.c b/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.c new file mode 100644 index 000000000000..73fdec4b791d --- /dev/null +++ b/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.c @@ -0,0 +1,657 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Copyright 2021-2024 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#include + +#include "cec-splitter.h" + +/* + * Helper function to reply to a received message with a Feature Abort + * message. + */ +static int cec_feature_abort_reason(struct cec_adapter *adap, + struct cec_msg *msg, u8 reason) +{ + struct cec_msg tx_msg = { }; + + /* + * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT + * message! + */ + if (msg->msg[1] == CEC_MSG_FEATURE_ABORT) + return 0; + /* Don't Feature Abort messages from 'Unregistered' */ + if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED) + return 0; + cec_msg_set_reply_to(&tx_msg, msg); + cec_msg_feature_abort(&tx_msg, msg->msg[1], reason); + return cec_transmit_msg(adap, &tx_msg, false); +} + +/* Transmit an Active Source message from this output port to a sink */ +static void cec_port_out_active_source(struct cec_splitter_port *p) +{ + struct cec_adapter *adap = p->adap; + struct cec_msg msg; + + if (!adap->is_configured) + return; + p->is_active_source = true; + cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0); + cec_msg_active_source(&msg, adap->phys_addr); + cec_transmit_msg(adap, &msg, false); +} + +/* Transmit Active Source messages from all output ports to the sinks */ +static void cec_out_active_source(struct cec_splitter *splitter) +{ + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) + cec_port_out_active_source(splitter->ports[i]); +} + +/* Transmit a Standby message from this output port to a sink */ +static void cec_port_out_standby(struct cec_splitter_port *p) +{ + struct cec_adapter *adap = p->adap; + struct cec_msg msg; + + if (!adap->is_configured) + return; + cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0); + cec_msg_standby(&msg); + cec_transmit_msg(adap, &msg, false); +} + +/* Transmit Standby messages from all output ports to the sinks */ +static void cec_out_standby(struct cec_splitter *splitter) +{ + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) + cec_port_out_standby(splitter->ports[i]); +} + +/* Transmit an Image/Text View On message from this output port to a sink */ +static void cec_port_out_wakeup(struct cec_splitter_port *p, u8 opcode) +{ + struct cec_adapter *adap = p->adap; + u8 la = adap->log_addrs.log_addr[0]; + struct cec_msg msg; + + if (la == CEC_LOG_ADDR_INVALID) + la = CEC_LOG_ADDR_UNREGISTERED; + cec_msg_init(&msg, la, 0); + msg.len = 2; + msg.msg[1] = opcode; + cec_transmit_msg(adap, &msg, false); +} + +/* Transmit Image/Text View On messages from all output ports to the sinks */ +static void cec_out_wakeup(struct cec_splitter *splitter, u8 opcode) +{ + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) + cec_port_out_wakeup(splitter->ports[i], opcode); +} + +/* + * Update the power state of the unconfigured CEC device to either + * Off or On depending on the current state of the splitter. + * This keeps the outputs in a consistent state. + */ +void cec_splitter_unconfigured_output(struct cec_splitter_port *p) +{ + p->video_latency = 1; + p->power_status = p->splitter->is_standby ? + CEC_OP_POWER_STATUS_TO_STANDBY : CEC_OP_POWER_STATUS_TO_ON; + + /* The adapter was unconfigured, so clear the sequence and ts values */ + p->out_give_device_power_status_seq = 0; + p->out_give_device_power_status_ts = ktime_set(0, 0); + p->out_request_current_latency_seq = 0; + p->out_request_current_latency_ts = ktime_set(0, 0); +} + +/* + * Update the power state of the newly configured CEC device to either + * Off or On depending on the current state of the splitter. + * This keeps the outputs in a consistent state. + */ +void cec_splitter_configured_output(struct cec_splitter_port *p) +{ + p->video_latency = 1; + p->power_status = p->splitter->is_standby ? + CEC_OP_POWER_STATUS_TO_STANDBY : CEC_OP_POWER_STATUS_TO_ON; + + if (p->splitter->is_standby) { + /* + * Some sinks only obey Standby if it comes from the + * active source. + */ + cec_port_out_active_source(p); + cec_port_out_standby(p); + } else { + cec_port_out_wakeup(p, CEC_MSG_IMAGE_VIEW_ON); + } +} + +/* Pass the in_msg on to all output ports */ +static void cec_out_passthrough(struct cec_splitter *splitter, + const struct cec_msg *in_msg) +{ + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + struct cec_adapter *adap = p->adap; + struct cec_msg msg; + + if (!adap->is_configured) + continue; + cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0); + msg.len = in_msg->len; + memcpy(msg.msg + 1, in_msg->msg + 1, msg.len - 1); + cec_transmit_msg(adap, &msg, false); + } +} + +/* + * See if all output ports received the Report Current Latency message, + * and if so, transmit the result from the input port to the video source. + */ +static void cec_out_report_current_latency(struct cec_splitter *splitter, + struct cec_adapter *input_adap) +{ + struct cec_msg reply = {}; + unsigned int reply_lat = 0; + unsigned int cnt = 0; + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + struct cec_adapter *adap = p->adap; + + /* Skip unconfigured ports */ + if (!adap->is_configured) + continue; + /* Return if a port is still waiting for a reply */ + if (p->out_request_current_latency_seq) + return; + reply_lat += p->video_latency - 1; + cnt++; + } + + /* + * All ports that can reply, replied, so clear the sequence + * and timestamp values. + */ + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + + p->out_request_current_latency_seq = 0; + p->out_request_current_latency_ts = ktime_set(0, 0); + } + + /* + * Return if there were no replies or the input port is no longer + * configured. + */ + if (!cnt || !input_adap->is_configured) + return; + + /* Reply with the average latency */ + reply_lat = 1 + reply_lat / cnt; + cec_msg_init(&reply, input_adap->log_addrs.log_addr[0], + splitter->request_current_latency_dest); + cec_msg_report_current_latency(&reply, input_adap->phys_addr, + reply_lat, 1, 1, 1); + cec_transmit_msg(input_adap, &reply, false); +} + +/* Transmit Request Current Latency to all output ports */ +static int cec_out_request_current_latency(struct cec_splitter *splitter) +{ + ktime_t now = ktime_get(); + bool error = true; + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + struct cec_adapter *adap = p->adap; + + if (!adap->is_configured) { + /* Clear if not configured */ + p->out_request_current_latency_seq = 0; + p->out_request_current_latency_ts = ktime_set(0, 0); + } else if (!p->out_request_current_latency_seq) { + /* + * Keep the old ts if an earlier request is still + * pending. This ensures that the request will + * eventually time out based on the timestamp of + * the first request if the sink is unresponsive. + */ + p->out_request_current_latency_ts = now; + } + } + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + struct cec_adapter *adap = p->adap; + struct cec_msg msg; + + if (!adap->is_configured) + continue; + cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0); + cec_msg_request_current_latency(&msg, true, adap->phys_addr); + if (cec_transmit_msg(adap, &msg, false)) + continue; + p->out_request_current_latency_seq = msg.sequence | (1U << 31); + error = false; + } + return error ? -ENODEV : 0; +} + +/* + * See if all output ports received the Report Power Status message, + * and if so, transmit the result from the input port to the video source. + */ +static void cec_out_report_power_status(struct cec_splitter *splitter, + struct cec_adapter *input_adap) +{ + struct cec_msg reply = {}; + /* The target power status of the splitter itself */ + u8 splitter_pwr = splitter->is_standby ? + CEC_OP_POWER_STATUS_STANDBY : CEC_OP_POWER_STATUS_ON; + /* + * The transient power status of the splitter, used if not all + * output report the target power status. + */ + u8 splitter_transient_pwr = splitter->is_standby ? + CEC_OP_POWER_STATUS_TO_STANDBY : CEC_OP_POWER_STATUS_TO_ON; + u8 reply_pwr = splitter_pwr; + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + + /* Skip if no sink was found (HPD was low for more than 5s) */ + if (!p->found_sink) + continue; + + /* Return if a port is still waiting for a reply */ + if (p->out_give_device_power_status_seq) + return; + if (p->power_status != splitter_pwr) + reply_pwr = splitter_transient_pwr; + } + + /* + * All ports that can reply, replied, so clear the sequence + * and timestamp values. + */ + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + + p->out_give_device_power_status_seq = 0; + p->out_give_device_power_status_ts = ktime_set(0, 0); + } + + /* Return if the input port is no longer configured. */ + if (!input_adap->is_configured) + return; + + /* Reply with the new power status */ + cec_msg_init(&reply, input_adap->log_addrs.log_addr[0], + splitter->give_device_power_status_dest); + cec_msg_report_power_status(&reply, reply_pwr); + cec_transmit_msg(input_adap, &reply, false); +} + +/* Transmit Give Device Power Status to all output ports */ +static int cec_out_give_device_power_status(struct cec_splitter *splitter) +{ + ktime_t now = ktime_get(); + bool error = true; + unsigned int i; + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + struct cec_adapter *adap = p->adap; + + /* + * Keep the old ts if an earlier request is still + * pending. This ensures that the request will + * eventually time out based on the timestamp of + * the first request if the sink is unresponsive. + */ + if (adap->is_configured && !p->out_give_device_power_status_seq) + p->out_give_device_power_status_ts = now; + } + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + struct cec_adapter *adap = p->adap; + struct cec_msg msg; + + if (!adap->is_configured) + continue; + + cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0); + cec_msg_give_device_power_status(&msg, true); + if (cec_transmit_msg(adap, &msg, false)) + continue; + p->out_give_device_power_status_seq = msg.sequence | (1U << 31); + error = false; + } + return error ? -ENODEV : 0; +} + +/* + * CEC messages received on the HDMI input of the splitter are + * forwarded (if relevant) to the HDMI outputs of the splitter. + */ +int cec_splitter_received_input(struct cec_splitter_port *p, struct cec_msg *msg) +{ + if (!cec_msg_status_is_ok(msg)) + return 0; + + if (msg->len < 2) + return -ENOMSG; + + switch (msg->msg[1]) { + case CEC_MSG_DEVICE_VENDOR_ID: + case CEC_MSG_REPORT_POWER_STATUS: + case CEC_MSG_SET_STREAM_PATH: + case CEC_MSG_ROUTING_CHANGE: + case CEC_MSG_REQUEST_ACTIVE_SOURCE: + case CEC_MSG_SYSTEM_AUDIO_MODE_STATUS: + return 0; + + case CEC_MSG_STANDBY: + p->splitter->is_standby = true; + cec_out_standby(p->splitter); + return 0; + + case CEC_MSG_IMAGE_VIEW_ON: + case CEC_MSG_TEXT_VIEW_ON: + p->splitter->is_standby = false; + cec_out_wakeup(p->splitter, msg->msg[1]); + return 0; + + case CEC_MSG_ACTIVE_SOURCE: + cec_out_active_source(p->splitter); + return 0; + + case CEC_MSG_SET_SYSTEM_AUDIO_MODE: + cec_out_passthrough(p->splitter, msg); + return 0; + + case CEC_MSG_GIVE_DEVICE_POWER_STATUS: + p->splitter->give_device_power_status_dest = + cec_msg_initiator(msg); + if (cec_out_give_device_power_status(p->splitter)) + cec_feature_abort_reason(p->adap, msg, + CEC_OP_ABORT_INCORRECT_MODE); + return 0; + + case CEC_MSG_REQUEST_CURRENT_LATENCY: { + u16 pa; + + p->splitter->request_current_latency_dest = + cec_msg_initiator(msg); + cec_ops_request_current_latency(msg, &pa); + if (pa == p->adap->phys_addr && + cec_out_request_current_latency(p->splitter)) + cec_feature_abort_reason(p->adap, msg, + CEC_OP_ABORT_INCORRECT_MODE); + return 0; + } + + default: + return -ENOMSG; + } + return -ENOMSG; +} + +void cec_splitter_nb_transmit_canceled_output(struct cec_splitter_port *p, + const struct cec_msg *msg, + struct cec_adapter *input_adap) +{ + struct cec_splitter *splitter = p->splitter; + u32 seq = msg->sequence | (1U << 31); + + /* + * If this is the result of a failed non-blocking transmit, or it is + * the result of the failed reply to a non-blocking transmit, then + * check if the original transmit was to get the current power status + * or latency and, if so, assume that the remove device is for one + * reason or another unavailable and assume that it is in the same + * power status as the splitter, or has no video latency. + */ + if ((cec_msg_recv_is_tx_result(msg) && !(msg->tx_status & CEC_TX_STATUS_OK)) || + (cec_msg_recv_is_rx_result(msg) && !(msg->rx_status & CEC_RX_STATUS_OK))) { + u8 tx_op = msg->msg[1]; + + if (msg->len < 2) + return; + if (cec_msg_recv_is_rx_result(msg) && + (msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT)) + tx_op = msg->msg[2]; + switch (tx_op) { + case CEC_MSG_GIVE_DEVICE_POWER_STATUS: + if (p->out_give_device_power_status_seq != seq) + break; + p->out_give_device_power_status_seq = 0; + p->out_give_device_power_status_ts = ktime_set(0, 0); + p->power_status = splitter->is_standby ? + CEC_OP_POWER_STATUS_STANDBY : + CEC_OP_POWER_STATUS_ON; + cec_out_report_power_status(splitter, input_adap); + break; + case CEC_MSG_REQUEST_CURRENT_LATENCY: + if (p->out_request_current_latency_seq != seq) + break; + p->video_latency = 1; + p->out_request_current_latency_seq = 0; + p->out_request_current_latency_ts = ktime_set(0, 0); + cec_out_report_current_latency(splitter, input_adap); + break; + } + return; + } + + if (cec_msg_recv_is_tx_result(msg)) { + if (p->out_request_current_latency_seq != seq) + return; + p->out_request_current_latency_ts = ns_to_ktime(msg->tx_ts); + return; + } +} + +/* + * CEC messages received on an HDMI output of the splitter + * are processed here. + */ +int cec_splitter_received_output(struct cec_splitter_port *p, struct cec_msg *msg, + struct cec_adapter *input_adap) +{ + struct cec_adapter *adap = p->adap; + struct cec_splitter *splitter = p->splitter; + u32 seq = msg->sequence | (1U << 31); + struct cec_msg reply = {}; + u16 pa; + + if (!adap->is_configured || msg->len < 2) + return -ENOMSG; + + switch (msg->msg[1]) { + case CEC_MSG_REPORT_POWER_STATUS: { + u8 pwr; + + cec_ops_report_power_status(msg, &pwr); + if (pwr > CEC_OP_POWER_STATUS_TO_STANDBY) + pwr = splitter->is_standby ? + CEC_OP_POWER_STATUS_TO_STANDBY : + CEC_OP_POWER_STATUS_TO_ON; + p->power_status = pwr; + if (p->out_give_device_power_status_seq == seq) { + p->out_give_device_power_status_seq = 0; + p->out_give_device_power_status_ts = ktime_set(0, 0); + } + cec_out_report_power_status(splitter, input_adap); + return 0; + } + + case CEC_MSG_REPORT_CURRENT_LATENCY: { + u8 video_lat; + u8 low_lat_mode; + u8 audio_out_comp; + u8 audio_out_delay; + + cec_ops_report_current_latency(msg, &pa, + &video_lat, &low_lat_mode, + &audio_out_comp, &audio_out_delay); + if (!video_lat || video_lat >= 252) + video_lat = 1; + p->video_latency = video_lat; + if (p->out_request_current_latency_seq == seq) { + p->out_request_current_latency_seq = 0; + p->out_request_current_latency_ts = ktime_set(0, 0); + } + cec_out_report_current_latency(splitter, input_adap); + return 0; + } + + case CEC_MSG_STANDBY: + case CEC_MSG_ROUTING_CHANGE: + case CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS: + return 0; + + case CEC_MSG_ACTIVE_SOURCE: + cec_ops_active_source(msg, &pa); + if (pa == 0) + p->is_active_source = false; + return 0; + + case CEC_MSG_REQUEST_ACTIVE_SOURCE: + if (!p->is_active_source) + return 0; + cec_msg_set_reply_to(&reply, msg); + cec_msg_active_source(&reply, adap->phys_addr); + cec_transmit_msg(adap, &reply, false); + return 0; + + case CEC_MSG_GIVE_DEVICE_POWER_STATUS: + cec_msg_set_reply_to(&reply, msg); + cec_msg_report_power_status(&reply, splitter->is_standby ? + CEC_OP_POWER_STATUS_STANDBY : + CEC_OP_POWER_STATUS_ON); + cec_transmit_msg(adap, &reply, false); + return 0; + + case CEC_MSG_SET_STREAM_PATH: + cec_ops_set_stream_path(msg, &pa); + if (pa == adap->phys_addr) { + cec_msg_set_reply_to(&reply, msg); + cec_msg_active_source(&reply, pa); + cec_transmit_msg(adap, &reply, false); + } + return 0; + + default: + return -ENOMSG; + } + return -ENOMSG; +} + +/* + * Called every second to check for timed out messages and whether there + * still is a video sink connected or not. + * + * Returns true if sinks were lost. + */ +bool cec_splitter_poll(struct cec_splitter *splitter, + struct cec_adapter *input_adap, bool debug) +{ + ktime_t now = ktime_get(); + u8 pwr = splitter->is_standby ? + CEC_OP_POWER_STATUS_STANDBY : CEC_OP_POWER_STATUS_ON; + unsigned int max_delay_ms = input_adap->xfer_timeout_ms + 2000; + unsigned int i; + bool res = false; + + for (i = 0; i < splitter->num_out_ports; i++) { + struct cec_splitter_port *p = splitter->ports[i]; + s64 pwr_delta, lat_delta; + bool pwr_timeout, lat_timeout; + + if (!p) + continue; + + pwr_delta = ktime_ms_delta(now, p->out_give_device_power_status_ts); + pwr_timeout = p->out_give_device_power_status_seq && + pwr_delta >= max_delay_ms; + lat_delta = ktime_ms_delta(now, p->out_request_current_latency_ts); + lat_timeout = p->out_request_current_latency_seq && + lat_delta >= max_delay_ms; + + /* + * If the HPD is low for more than 5 seconds, then assume no display + * is connected. + */ + if (p->found_sink && ktime_to_ns(p->lost_sink_ts) && + ktime_ms_delta(now, p->lost_sink_ts) > 5000) { + if (debug) + dev_info(splitter->dev, + "port %u: HPD low for more than 5s, assume no sink is connected.\n", + p->port); + p->found_sink = false; + p->lost_sink_ts = ktime_set(0, 0); + res = true; + } + + /* + * If the power status request timed out, then set the port's + * power status to that of the splitter, ensuring a consistent + * power state. + */ + if (pwr_timeout) { + mutex_lock(&p->adap->lock); + if (debug) + dev_info(splitter->dev, + "port %u: give up on power status for seq %u\n", + p->port, + p->out_give_device_power_status_seq & ~(1 << 31)); + p->power_status = pwr; + p->out_give_device_power_status_seq = 0; + p->out_give_device_power_status_ts = ktime_set(0, 0); + mutex_unlock(&p->adap->lock); + cec_out_report_power_status(splitter, input_adap); + } + + /* + * If the current latency request timed out, then set the port's + * latency to 1. + */ + if (lat_timeout) { + mutex_lock(&p->adap->lock); + if (debug) + dev_info(splitter->dev, + "port %u: give up on latency for seq %u\n", + p->port, + p->out_request_current_latency_seq & ~(1 << 31)); + p->video_latency = 1; + p->out_request_current_latency_seq = 0; + p->out_request_current_latency_ts = ktime_set(0, 0); + mutex_unlock(&p->adap->lock); + cec_out_report_current_latency(splitter, input_adap); + } + } + return res; +} diff --git a/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.h b/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.h new file mode 100644 index 000000000000..7422f7c5719e --- /dev/null +++ b/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * Copyright 2021-2024 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _CEC_SPLITTER_H_ +#define _CEC_SPLITTER_H_ + +struct cec_splitter; + +#define STATE_CHANGE_MAX_REPEATS 2 + +struct cec_splitter_port { + struct cec_splitter *splitter; + struct cec_adapter *adap; + unsigned int port; + bool is_active_source; + bool found_sink; + ktime_t lost_sink_ts; + u32 out_request_current_latency_seq; + ktime_t out_request_current_latency_ts; + u8 video_latency; + u32 out_give_device_power_status_seq; + ktime_t out_give_device_power_status_ts; + u8 power_status; +}; + +struct cec_splitter { + struct device *dev; + unsigned int num_out_ports; + struct cec_splitter_port **ports; + + /* High-level splitter state */ + u8 request_current_latency_dest; + u8 give_device_power_status_dest; + bool is_standby; +}; + +void cec_splitter_unconfigured_output(struct cec_splitter_port *port); +void cec_splitter_configured_output(struct cec_splitter_port *port); +int cec_splitter_received_input(struct cec_splitter_port *port, struct cec_msg *msg); +int cec_splitter_received_output(struct cec_splitter_port *port, struct cec_msg *msg, + struct cec_adapter *input_adap); +void cec_splitter_nb_transmit_canceled_output(struct cec_splitter_port *port, + const struct cec_msg *msg, + struct cec_adapter *input_adap); +bool cec_splitter_poll(struct cec_splitter *splitter, + struct cec_adapter *input_adap, bool debug); + +#endif diff --git a/drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.c b/drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.c new file mode 100644 index 000000000000..8526f613a40e --- /dev/null +++ b/drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.c @@ -0,0 +1,1836 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2021-2024 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +/* + * Currently this driver does not fully support the serial port of the + * Extron, only the USB port is fully supported. + * + * Issues specific to using the serial port instead of the USB since the + * serial port doesn't detect if the device is powered off: + * + * - Some periodic ping mechanism is needed to detect when the Extron is + * powered off and when it is powered on again. + * - What to do when it is powered off and the driver is modprobed? Keep + * trying to contact the Extron indefinitely? + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "extron-da-hd-4k-plus.h" + +MODULE_AUTHOR("Hans Verkuil "); +MODULE_DESCRIPTION("Extron DA HD 4K PLUS HDMI CEC driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-1)"); + +static unsigned int vendor_id; +module_param(vendor_id, uint, 0444); +MODULE_PARM_DESC(vendor_id, "CEC Vendor ID"); + +static char manufacturer_name[4]; +module_param_string(manufacturer_name, manufacturer_name, + sizeof(manufacturer_name), 0644); +MODULE_PARM_DESC(manufacturer_name, + "EDID Vendor String (3 uppercase characters)"); + +static bool hpd_never_low; +module_param(hpd_never_low, bool, 0644); +MODULE_PARM_DESC(hpd_never_low, "Input HPD will never go low (1), or go low if all output HPDs are low (0, default)"); + +#define EXTRON_TIMEOUT_SECS 6 + +static const u8 hdmi_edid[256] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x20, 0x01, 0x03, 0x80, 0x60, 0x36, 0x78, + 0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26, + 0x0f, 0x50, 0x54, 0x20, 0x00, 0x00, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, + 0x80, 0x18, 0x71, 0x38, 0x2d, 0x40, 0x58, 0x2c, + 0x45, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18, + 0x87, 0x11, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x68, + 0x64, 0x6d, 0x69, 0x2d, 0x31, 0x30, 0x38, 0x30, + 0x70, 0x36, 0x30, 0x0a, 0x00, 0x00, 0x00, 0xfe, + 0x00, 0x73, 0x65, 0x72, 0x69, 0x6f, 0x0a, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x01, 0x95, + + 0x02, 0x03, 0x1b, 0xf1, 0x42, 0x10, 0x01, 0x23, + 0x09, 0x07, 0x07, 0x83, 0x01, 0x00, 0x00, 0x68, + 0x03, 0x0c, 0x00, 0x10, 0x00, 0x00, 0x21, 0x01, + 0xe2, 0x00, 0xca, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x89, +}; + +static const u8 hdmi_edid_4k_300[256] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x20, 0x01, 0x03, 0x80, 0x60, 0x36, 0x78, + 0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26, + 0x0f, 0x50, 0x54, 0x20, 0x00, 0x00, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, + 0x80, 0x18, 0x71, 0x38, 0x2d, 0x40, 0x58, 0x2c, + 0x45, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18, + 0x87, 0x3c, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x68, + 0x64, 0x6d, 0x69, 0x2d, 0x34, 0x6b, 0x2d, 0x36, + 0x30, 0x30, 0x0a, 0x20, 0x00, 0x00, 0x00, 0xfe, + 0x00, 0x73, 0x65, 0x72, 0x69, 0x6f, 0x0a, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x01, 0x87, + + 0x02, 0x03, 0x1f, 0xf1, 0x43, 0x10, 0x5f, 0x01, + 0x23, 0x09, 0x07, 0x07, 0x83, 0x01, 0x00, 0x00, + 0x6b, 0x03, 0x0c, 0x00, 0x10, 0x00, 0x00, 0x3c, + 0x21, 0x00, 0x20, 0x01, 0xe2, 0x00, 0xca, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, +}; + +static const u8 hdmi_edid_4k_600[256] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x20, 0x01, 0x03, 0x80, 0x60, 0x36, 0x78, + 0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26, + 0x0f, 0x50, 0x54, 0x20, 0x00, 0x00, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x08, 0xe8, + 0x00, 0x30, 0xf2, 0x70, 0x5a, 0x80, 0xb0, 0x58, + 0x8a, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18, + 0x87, 0x3c, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x68, + 0x64, 0x6d, 0x69, 0x2d, 0x34, 0x6b, 0x2d, 0x36, + 0x30, 0x30, 0x0a, 0x20, 0x00, 0x00, 0x00, 0xfe, + 0x00, 0x73, 0x65, 0x72, 0x69, 0x6f, 0x0a, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x01, 0x4c, + + 0x02, 0x03, 0x28, 0xf1, 0x44, 0x61, 0x5f, 0x10, + 0x01, 0x23, 0x09, 0x07, 0x07, 0x83, 0x01, 0x00, + 0x00, 0x6b, 0x03, 0x0c, 0x00, 0x10, 0x00, 0x00, + 0x3c, 0x21, 0x00, 0x20, 0x01, 0x67, 0xd8, 0x5d, + 0xc4, 0x01, 0x78, 0x00, 0x00, 0xe2, 0x00, 0xca, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, +}; + +static int extron_send_byte(struct serio *serio, char byte) +{ + int err, i; + + for (i = 0; i < 100; i++) { + err = serio_write(serio, byte); + if (!err) + break; + usleep_range(80, 120); + } + if (err) + dev_warn(&serio->dev, "unable to write byte after 100 attempts\n"); + return err ? -EIO : 0; +} + +static int extron_send_len(struct serio *serio, const char *command, + const unsigned char *bin, unsigned int len) +{ + int err = 0; + + for (; !err && *command; command++) + err = extron_send_byte(serio, *command); + if (!err) + err = extron_send_byte(serio, '\r'); + if (bin) + for (; !err && len; len--) + err = extron_send_byte(serio, *bin++); + return err; +} + +static int extron_send_and_wait_len(struct extron *extron, struct extron_port *port, + const char *cmd, const unsigned char *bin, + unsigned int len, const char *response) +{ + int timeout = EXTRON_TIMEOUT_SECS * HZ; + int err; + + if (debug) { + if (response) + dev_info(extron->dev, "transmit %s (response: %s)\n", + cmd, response); + else + dev_info(extron->dev, "transmit %s\n", cmd); + } + + mutex_lock(&extron->serio_lock); + if (port) { + init_completion(&port->cmd_done); + port->cmd_error = 0; + port->response = response; + } else { + init_completion(&extron->cmd_done); + extron->cmd_error = 0; + extron->response = response; + } + err = extron_send_len(extron->serio, cmd, bin, len); + + if (!err && response && + !wait_for_completion_timeout(port ? &port->cmd_done : &extron->cmd_done, timeout)) { + dev_info(extron->dev, "transmit %s failed with %s (expected: %s)\n", + cmd, extron->reply, response); + err = -ETIMEDOUT; + } + + if (!err && response && (port ? port->cmd_error : extron->cmd_error)) { + dev_info(extron->dev, "transmit %s failed with E%02u (expected: %s)\n", + cmd, port ? port->cmd_error : extron->cmd_error, response); + if (port) + port->cmd_error = 0; + else + extron->cmd_error = 0; + err = -EPROTO; + } + if (port) + port->response = NULL; + else + extron->response = NULL; + mutex_unlock(&extron->serio_lock); + return err; +} + +static int extron_send_and_wait(struct extron *extron, struct extron_port *port, + const char *cmd, const char *response) +{ + return extron_send_and_wait_len(extron, port, cmd, NULL, 0, response); +} + +static void extron_parse_edid(struct extron_port *port) +{ + const u8 *edid = port->edid; + unsigned int i, end; + u8 d; + + port->has_4kp30 = false; + port->has_4kp60 = false; + port->has_qy = false; + port->has_qs = false; + /* Store Established Timings 1 and 2 */ + port->est_i = edid[0x23]; + port->est_ii = edid[0x24]; + + // Check DTDs in base block + for (i = 0; i < 4; i++) { + const u8 *dtd = edid + 0x36 + i * 18; + unsigned int w, h; + unsigned int mhz; + u64 pclk; + + if (!dtd[0] && !dtd[1]) + continue; + w = dtd[2] + ((dtd[4] & 0xf0) << 4); + h = dtd[5] + ((dtd[7] & 0xf0) << 4); + if (w != 3840 || h != 2160) + continue; + + w += dtd[3] + ((dtd[4] & 0x0f) << 8); + h += dtd[6] + ((dtd[7] & 0x0f) << 8); + pclk = dtd[0] + (dtd[1] << 8); + pclk *= 100000; + mhz = div_u64(pclk, w * h); + if (mhz >= 297) + port->has_4kp30 = true; + if (mhz >= 594) + port->has_4kp60 = true; + } + + if (port->edid_blocks == 1) + return; + + edid += 128; + + /* Return if not a CTA-861 extension block */ + if (edid[0] != 0x02 || edid[1] != 0x03) + return; + + /* search Video Data Block (tag 2) */ + d = edid[2] & 0x7f; + /* Check if there are Data Blocks */ + if (d <= 4) + return; + + i = 4; + end = d; + + do { + u8 tag = edid[i] >> 5; + u8 len = edid[i] & 0x1f; + + /* Avoid buffer overrun in case the EDID is malformed */ + if (i + len + 1 > 0x7f) + return; + + switch (tag) { + case 2: /* Video Data Block */ + /* Search for VIC 97 */ + if (memchr(edid + i + 1, 97, len)) + port->has_4kp60 = true; + /* Search for VIC 95 */ + if (memchr(edid + i + 1, 95, len)) + port->has_4kp30 = true; + break; + + case 7: /* Use Extended Tag */ + switch (edid[i + 1]) { + case 0: /* Video Capability Data Block */ + if (edid[i + 2] & 0x80) + port->has_qy = true; + if (edid[i + 2] & 0x40) + port->has_qs = true; + break; + } + break; + } + i += len + 1; + } while (i < end); +} + +static int get_edid_tag_location(const u8 *edid, unsigned int size, + u8 want_tag, u8 ext_tag) +{ + unsigned int offset = 128; + int i, end; + u8 d; + + edid += offset; + + /* Return if not a CTA-861 extension block */ + if (size < 256 || edid[0] != 0x02 || edid[1] != 0x03) + return -1; + + /* search tag */ + d = edid[0x02] & 0x7f; + if (d <= 4) + return -1; + + i = 0x04; + end = 0x00 + d; + + do { + unsigned char tag = edid[i] >> 5; + unsigned char len = edid[i] & 0x1f; + + if (tag != want_tag || i + len > end) { + i += len + 1; + continue; + } + + if (tag < 7 || (len >= 1 && edid[i + 1] == ext_tag)) + return offset + i; + i += len + 1; + } while (i < end); + return -1; +} + +static void extron_edid_crc(u8 *edid) +{ + u8 sum = 0; + int offset; + + /* Update CRC */ + for (offset = 0; offset < 127; offset++) + sum += edid[offset]; + edid[127] = 256 - sum; +} + +/* + * Fill in EDID string. As per VESA EDID-1.3, strings are at most 13 chars + * long. If shorter then add a 0x0a character after the string and pad the + * remainder with spaces. + */ +static void extron_set_edid_string(u8 *start, const char *s) +{ + const unsigned int max_len = 13; + int len = strlen(s); + + memset(start, ' ', max_len); + if (len > max_len) + len = max_len; + memcpy(start, s, len); + if (len < max_len) + start[len] = 0x0a; +} + +static void extron_update_edid(struct extron_port *port, unsigned int blocks) +{ + int offset; + u8 c1, c2; + + c1 = ((manufacturer_name[0] - '@') << 2) | + (((manufacturer_name[1] - '@') >> 3) & 0x03); + c2 = (((manufacturer_name[1] - '@') & 0x07) << 5) | + ((manufacturer_name[2] - '@') & 0x1f); + + port->edid_tmp[8] = c1; + port->edid_tmp[9] = c2; + + /* Set Established Timings, but always enable VGA */ + port->edid_tmp[0x23] = port->est_i | 0x20; + port->edid_tmp[0x24] = port->est_ii; + + /* Set the Monitor Name to the unit name */ + extron_set_edid_string(port->edid_tmp + 0x5f, port->extron->unit_name); + /* Set the ASCII String to the CEC adapter name */ + extron_set_edid_string(port->edid_tmp + 0x71, port->adap->name); + + extron_edid_crc(port->edid_tmp); + + /* Find Video Capability Data Block */ + offset = get_edid_tag_location(port->edid_tmp, blocks * 128, 7, 0); + if (offset > 0) { + port->edid_tmp[offset + 2] &= ~0xc0; + if (port->has_qy) + port->edid_tmp[offset + 2] |= 0x80; + if (port->has_qs) + port->edid_tmp[offset + 2] |= 0x40; + } + + extron_edid_crc(port->edid_tmp + 128); +} + +static int extron_write_edid(struct extron_port *port, + const u8 *edid, unsigned int blocks) +{ + struct extron *extron = port->extron; + u16 phys_addr = CEC_PHYS_ADDR_INVALID; + int ret; + + if (cec_get_edid_spa_location(edid, blocks * 128)) + phys_addr = 0; + + if (mutex_lock_interruptible(&extron->edid_lock)) + return -EINTR; + + memcpy(port->edid_tmp, edid, blocks * 128); + + if (manufacturer_name[0]) + extron_update_edid(port, blocks); + + ret = extron_send_and_wait_len(port->extron, port, "W+UF256,in.bin", + port->edid_tmp, sizeof(port->edid_tmp), + "Upl"); + if (ret) + goto unlock; + ret = extron_send_and_wait(port->extron, port, "WI1,in.binEDID", + "EdidI01"); + if (ret) + goto unlock; + + port->edid_blocks = blocks; + memcpy(port->edid, port->edid_tmp, blocks * 128); + port->read_edid = true; + mutex_unlock(&extron->edid_lock); + + cec_s_phys_addr(port->adap, phys_addr, false); + return 0; + +unlock: + mutex_unlock(&extron->edid_lock); + return ret; +} + +static void update_edid_work(struct work_struct *w) +{ + struct extron *extron = container_of(w, struct extron, + work_update_edid.work); + struct extron_port *in = extron->ports[extron->num_out_ports]; + struct extron_port *p; + bool has_edid = false; + bool has_4kp30 = true; + bool has_4kp60 = true; + bool has_qy = true; + bool has_qs = true; + u8 est_i = 0xff; + u8 est_ii = 0xff; + unsigned int out; + + for (out = 0; has_4kp60 && out < extron->num_out_ports; out++) { + p = extron->ports[out]; + if (p->read_edid) { + has_4kp60 = p->has_4kp60; + est_i &= p->est_i; + est_ii &= p->est_ii; + has_edid = true; + } + } + for (out = 0; has_4kp30 && out < extron->num_out_ports; out++) + if (extron->ports[out]->read_edid) + has_4kp30 = extron->ports[out]->has_4kp30; + + for (out = 0; has_qy && out < extron->num_out_ports; out++) + if (extron->ports[out]->read_edid) + has_qy = extron->ports[out]->has_qy; + + for (out = 0; has_qs && out < extron->num_out_ports; out++) + if (extron->ports[out]->read_edid) + has_qs = extron->ports[out]->has_qs; + + /* exit if no output port had an EDID */ + if (!has_edid) + return; + + /* exit if the input EDID properties remained unchanged */ + if (has_4kp60 == in->has_4kp60 && has_4kp30 == in->has_4kp30 && + has_qy == in->has_qy && has_qs == in->has_qs && + est_i == in->est_i && est_ii == in->est_ii) + return; + + in->has_4kp60 = has_4kp60; + in->has_4kp30 = has_4kp30; + in->has_qy = has_qy; + in->has_qs = has_qs; + in->est_i = est_i; + in->est_ii = est_ii; + extron_write_edid(extron->ports[extron->num_out_ports], + has_4kp60 ? hdmi_edid_4k_600 : + (has_4kp30 ? hdmi_edid_4k_300 : hdmi_edid), 2); +} + +static void extron_read_edid(struct extron_port *port) +{ + struct extron *extron = port->extron; + char cmd[10], reply[10]; + unsigned int idx; + + idx = port->port.port + (port->is_input ? 0 : extron->num_in_ports); + snprintf(cmd, sizeof(cmd), "WR%uEDID", idx); + snprintf(reply, sizeof(reply), "EdidR%u", idx); + if (mutex_lock_interruptible(&extron->edid_lock)) + return; + if (port->read_edid) + goto unlock; + extron->edid_bytes_read = 0; + extron->edid_port = port; + port->edid_blocks = 0; + if (!port->has_edid) + goto no_edid; + + extron->edid_reading = true; + + if (!extron_send_and_wait(extron, port, cmd, reply)) + wait_for_completion_killable_timeout(&extron->edid_completion, + msecs_to_jiffies(1000)); + if (port->edid_blocks) { + extron_parse_edid(port); + port->read_edid = true; + if (!port->is_input) + v4l2_ctrl_s_ctrl(port->ctrl_tx_edid_present, 1); + } +no_edid: + extron->edid_reading = false; +unlock: + mutex_unlock(&extron->edid_lock); + cancel_delayed_work_sync(&extron->work_update_edid); + if (manufacturer_name[0]) + schedule_delayed_work(&extron->work_update_edid, + msecs_to_jiffies(1000)); +} + +static void extron_irq_work_handler(struct work_struct *work) +{ + struct extron_port *port = + container_of(work, struct extron_port, irq_work); + struct extron *extron = port->extron; + unsigned long flags; + bool update_pa; + u16 pa; + bool update_has_signal; + bool has_signal; + bool update_has_edid; + bool has_edid; + u32 status; + + spin_lock_irqsave(&port->msg_lock, flags); + while (port->rx_msg_num) { + spin_unlock_irqrestore(&port->msg_lock, flags); + cec_received_msg(port->adap, + &port->rx_msg[port->rx_msg_cur_idx]); + spin_lock_irqsave(&port->msg_lock, flags); + if (port->rx_msg_num) + port->rx_msg_num--; + port->rx_msg_cur_idx = + (port->rx_msg_cur_idx + 1) % NUM_MSGS; + } + update_pa = port->update_phys_addr; + pa = port->phys_addr; + port->update_phys_addr = false; + update_has_signal = port->update_has_signal; + has_signal = port->has_signal; + port->update_has_signal = false; + update_has_edid = port->update_has_edid; + has_edid = port->has_edid; + port->update_has_edid = false; + status = port->tx_done_status; + port->tx_done_status = 0; + spin_unlock_irqrestore(&port->msg_lock, flags); + + if (status) + cec_transmit_done(port->adap, status, 0, 0, 0, 0); + + if (update_has_signal && port->is_input) + v4l2_ctrl_s_ctrl(port->ctrl_rx_power_present, has_signal); + + if (update_has_edid && !port->is_input) { + v4l2_ctrl_s_ctrl(port->ctrl_tx_hotplug, + port->has_edid); + if (port->has_edid) { + port->port.found_sink = true; + port->port.lost_sink_ts = ktime_set(0, 0); + } else { + port->port.lost_sink_ts = ktime_get(); + } + if (!has_edid) { + port->edid_blocks = 0; + port->read_edid = false; + if (extron->edid_reading && !has_edid && + extron->edid_port == port) + extron->edid_reading = false; + v4l2_ctrl_s_ctrl(port->ctrl_tx_edid_present, 0); + } else if (!extron->edid_reading || extron->edid_port != port) { + extron_read_edid(port); + } + } + if (update_pa) + cec_s_phys_addr(port->adap, pa, false); +} + +static void extron_process_received(struct extron_port *port, const char *data) +{ + struct cec_msg msg = {}; + unsigned int len = strlen(data); + unsigned long irq_flags; + unsigned int idx; + + if (!port || port->disconnected) + return; + + if (len < 5 || (len - 2) % 3 || data[len - 2] != '*') + goto malformed; + + while (*data != '*') { + int v = hex2bin(&msg.msg[msg.len], data + 1, 1); + + if (*data != '%' || v) + goto malformed; + msg.len++; + data += 3; + } + + spin_lock_irqsave(&port->msg_lock, irq_flags); + idx = (port->rx_msg_cur_idx + port->rx_msg_num) % + NUM_MSGS; + if (port->rx_msg_num == NUM_MSGS) { + dev_warn(port->dev, + "message queue is full, dropping %*ph\n", + msg.len, msg.msg); + spin_unlock_irqrestore(&port->msg_lock, + irq_flags); + return; + } + port->rx_msg_num++; + port->rx_msg[idx] = msg; + spin_unlock_irqrestore(&port->msg_lock, irq_flags); + if (!port->disconnected) + schedule_work(&port->irq_work); + return; + +malformed: + dev_info(port->extron->dev, "malformed msg received: '%s'\n", data); +} + +static void extron_port_signal_change(struct extron_port *port, bool has_sig) +{ + unsigned long irq_flags; + bool update = false; + + if (!port) + return; + + spin_lock_irqsave(&port->msg_lock, irq_flags); + if (!port->update_has_signal && port->has_signal != has_sig) { + port->update_has_signal = true; + update = true; + } + port->has_signal = has_sig; + spin_unlock_irqrestore(&port->msg_lock, irq_flags); + if (update && !port->disconnected) + schedule_work(&port->irq_work); +} + +static void extron_process_signal_change(struct extron *extron, const char *data) +{ + unsigned int i; + + extron_port_signal_change(extron->ports[extron->num_out_ports], + data[0] == '1'); + for (i = 0; i < extron->num_out_ports; i++) + extron_port_signal_change(extron->ports[i], + data[2 + 2 * i] != '0'); +} + +static void extron_port_edid_change(struct extron_port *port, bool has_edid) +{ + unsigned long irq_flags; + bool update = false; + + if (!port) + return; + + spin_lock_irqsave(&port->msg_lock, irq_flags); + if (!port->update_has_edid && port->has_edid != has_edid) { + port->update_has_edid = true; + update = true; + } + port->has_edid = has_edid; + spin_unlock_irqrestore(&port->msg_lock, irq_flags); + if (update && !port->disconnected) + schedule_work(&port->irq_work); +} + +static void extron_process_edid_change(struct extron *extron, const char *data) +{ + unsigned int i; + + /* + * Do nothing if the Extron isn't ready yet. Trying to do this + * while the Extron firmware is still settling will fail. + */ + if (!extron->is_ready) + return; + + for (i = 0; i < extron->num_out_ports; i++) + extron_port_edid_change(extron->ports[i], + data[2 + 2 * i] != '0'); +} + +static void extron_phys_addr_change(struct extron_port *port, u16 pa) +{ + unsigned long irq_flags; + bool update = false; + + if (!port) + return; + + spin_lock_irqsave(&port->msg_lock, irq_flags); + if (!port->update_phys_addr && port->phys_addr != pa) { + update = true; + port->update_phys_addr = true; + } + port->phys_addr = pa; + spin_unlock_irqrestore(&port->msg_lock, irq_flags); + if (update && !port->disconnected) + schedule_work(&port->irq_work); +} + +static void extron_process_tx_done(struct extron_port *port, char status) +{ + unsigned long irq_flags; + unsigned int tx_status; + + if (!port) + return; + + switch (status) { + case '0': + tx_status = CEC_TX_STATUS_NACK | CEC_TX_STATUS_MAX_RETRIES; + break; + case '1': + tx_status = CEC_TX_STATUS_OK; + break; + default: + tx_status = CEC_TX_STATUS_ERROR; + break; + } + spin_lock_irqsave(&port->msg_lock, irq_flags); + port->tx_done_status = tx_status; + spin_unlock_irqrestore(&port->msg_lock, irq_flags); + if (!port->disconnected) + schedule_work(&port->irq_work); +} + +static void extron_add_edid(struct extron_port *port, const char *hex) +{ + struct extron *extron = port ? port->extron : NULL; + + if (!port || port != extron->edid_port) + return; + while (extron->edid_bytes_read < sizeof(port->edid) && *hex) { + int err = hex2bin(&port->edid[extron->edid_bytes_read], hex, 1); + + if (err) { + extron->edid_reading = false; + complete(&extron->edid_completion); + break; + } + extron->edid_bytes_read++; + hex += 2; + } + if (extron->edid_bytes_read == 128 && + port->edid[126] == 0) { + /* There are no extension blocks, we're done */ + port->edid_blocks = 1; + extron->edid_reading = false; + complete(&extron->edid_completion); + } + if (extron->edid_bytes_read < sizeof(port->edid)) + return; + if (!*hex) + port->edid_blocks = 2; + extron->edid_reading = false; + complete(&extron->edid_completion); +} + +static irqreturn_t extron_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct extron *extron = serio_get_drvdata(serio); + struct extron_port *port = NULL; + bool found_response; + unsigned int p; + + if (data == '\r' || data == '\n') { + if (extron->idx == 0) + return IRQ_HANDLED; + memcpy(extron->data, extron->buf, extron->idx); + extron->len = extron->idx; + extron->data[extron->len] = 0; + if (debug) + dev_info(extron->dev, "received %s\n", extron->data); + extron->idx = 0; + if (!memcmp(extron->data, "Sig", 3) && + extron->data[4] == '*') { + extron_process_signal_change(extron, extron->data + 3); + } else if (!memcmp(extron->data, "Hdcp", 4) && + extron->data[5] == '*') { + extron_process_edid_change(extron, extron->data + 4); + } else if (!memcmp(extron->data, "DcecI", 5) && + extron->data[5] >= '1' && + extron->data[5] < '1' + extron->num_in_ports) { + unsigned int p = extron->data[5] - '1'; + + p += extron->num_out_ports; + extron_process_tx_done(extron->ports[p], + extron->data[extron->len - 1]); + } else if (!memcmp(extron->data, "Ceci", 4) && + extron->data[4] >= '1' && + extron->data[4] < '1' + extron->num_in_ports && + extron->data[5] == '*') { + unsigned int p = extron->data[4] - '1'; + + p += extron->num_out_ports; + extron_process_received(extron->ports[p], + extron->data + 6); + } else if (!memcmp(extron->data, "DcecO", 5) && + extron->data[5] >= '1' && + extron->data[5] < '1' + extron->num_out_ports) { + unsigned int p = extron->data[5] - '1'; + + extron_process_tx_done(extron->ports[p], + extron->data[extron->len - 1]); + } else if (!memcmp(extron->data, "Ceco", 4) && + extron->data[4] >= '1' && + extron->data[4] < '1' + extron->num_out_ports && + extron->data[5] == '*') { + unsigned int p = extron->data[4] - '1'; + + extron_process_received(extron->ports[p], + extron->data + 6); + } else if (!memcmp(extron->data, "Pceco", 5) && + extron->data[5] >= '1' && + extron->data[5] < '1' + extron->num_out_ports) { + unsigned int p = extron->data[5] - '1'; + unsigned int tmp_pa[2] = { 0xff, 0xff }; + + if (sscanf(extron->data + 7, "%%%02x%%%02x", + &tmp_pa[0], &tmp_pa[1]) == 2) + extron_phys_addr_change(extron->ports[p], + tmp_pa[0] << 8 | tmp_pa[1]); + } else if (!memcmp(extron->data, "Pceci", 5) && + extron->data[5] >= '1' && + extron->data[5] < '1' + extron->num_in_ports) { + unsigned int p = extron->data[5] - '1'; + unsigned int tmp_pa[2] = { 0xff, 0xff }; + + p += extron->num_out_ports; + if (sscanf(extron->data + 7, "%%%02x%%%02x", + &tmp_pa[0], &tmp_pa[1]) == 2) + extron_phys_addr_change(extron->ports[p], + tmp_pa[0] << 8 | tmp_pa[1]); + } else if (!memcmp(extron->data, "EdidR", 5) && + extron->data[5] >= '1' && + extron->data[5] < '1' + extron->num_ports && + extron->data[6] == '*') { + unsigned int p = extron->data[5] - '1'; + + if (p) + p--; + else + p = extron->num_out_ports; + extron_add_edid(extron->ports[p], extron->data + 7); + } else if (extron->edid_reading && extron->len == 32 && + extron->edid_port) { + extron_add_edid(extron->edid_port, extron->data); + } + + found_response = false; + if (extron->response && + !strncmp(extron->response, extron->data, + strlen(extron->response))) + found_response = true; + + for (p = 0; !found_response && p < extron->num_ports; p++) { + port = extron->ports[p]; + if (port && port->response && + !strncmp(port->response, extron->data, + strlen(port->response))) + found_response = true; + } + + if (!found_response && extron->response && + extron->data[0] == 'E' && + isdigit(extron->data[1]) && + isdigit(extron->data[2]) && + !extron->data[3]) { + extron->cmd_error = (extron->data[1] - '0') * 10 + + extron->data[2] - '0'; + extron->response = NULL; + complete(&extron->cmd_done); + } + + if (!found_response) + return IRQ_HANDLED; + + memcpy(extron->reply, extron->data, extron->len); + extron->reply[extron->len] = 0; + if (!port) { + extron->response = NULL; + complete(&extron->cmd_done); + } else { + port->response = NULL; + complete(&port->cmd_done); + } + return IRQ_HANDLED; + } + + if (extron->idx >= DATA_SIZE - 1) { + dev_info(extron->dev, + "throwing away %d bytes of garbage\n", extron->idx); + extron->idx = 0; + } + extron->buf[extron->idx++] = (char)data; + return IRQ_HANDLED; +} + +static int extron_cec_adap_enable(struct cec_adapter *adap, bool enable) +{ + struct extron_port *port = cec_get_drvdata(adap); + + return (port->disconnected && enable) ? -ENODEV : 0; +} + +static int extron_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) +{ + struct extron_port *port = cec_get_drvdata(adap); + char cmd[26]; + char resp[25]; + u8 la = log_addr == CEC_LOG_ADDR_INVALID ? 15 : log_addr; + int err; + + if (port->disconnected) + return -ENODEV; + snprintf(cmd, sizeof(cmd), "W%c%u*%uLCEC", + port->direction, port->port.port, la); + snprintf(resp, sizeof(resp), "Lcec%c%u*%u", + port->direction, port->port.port, la); + err = extron_send_and_wait(port->extron, port, cmd, resp); + return log_addr != CEC_LOG_ADDR_INVALID && err ? err : 0; +} + +static int extron_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg) +{ + struct extron_port *port = cec_get_drvdata(adap); + char buf[CEC_MAX_MSG_SIZE * 3 + 1]; + char cmd[CEC_MAX_MSG_SIZE * 3 + 13]; + unsigned int i; + + if (port->disconnected) + return -ENODEV; + buf[0] = 0; + for (i = 0; i < msg->len - 1; i++) + sprintf(buf + i * 3, "%%%02X", msg->msg[i + 1]); + snprintf(cmd, sizeof(cmd), "W%c%u*%u*%u*%sDCEC", + port->direction, port->port.port, + cec_msg_initiator(msg), cec_msg_destination(msg), buf); + return extron_send_and_wait(port->extron, port, cmd, NULL); +} + +static void extron_cec_adap_unconfigured(struct cec_adapter *adap) +{ + struct extron_port *port = cec_get_drvdata(adap); + + if (port->disconnected) + return; + if (debug) + dev_info(port->extron->dev, "unconfigured port %d (%s)\n", + port->port.port, + port->extron->splitter.is_standby ? "Off" : "On"); + if (!port->is_input) + cec_splitter_unconfigured_output(&port->port); +} + +static void extron_cec_configured(struct cec_adapter *adap) +{ + struct extron_port *port = cec_get_drvdata(adap); + + if (port->disconnected) + return; + if (debug) + dev_info(port->extron->dev, "configured port %d (%s)\n", + port->port.port, + port->extron->splitter.is_standby ? "Off" : "On"); + if (!port->is_input) + cec_splitter_configured_output(&port->port); +} + +static void extron_cec_adap_nb_transmit_canceled(struct cec_adapter *adap, + const struct cec_msg *msg) +{ + struct extron_port *port = cec_get_drvdata(adap); + struct cec_adapter *input_adap; + + if (!vendor_id) + return; + if (port->disconnected || port->is_input) + return; + input_adap = port->extron->ports[port->extron->num_out_ports]->adap; + cec_splitter_nb_transmit_canceled_output(&port->port, msg, input_adap); +} + +static int extron_received(struct cec_adapter *adap, struct cec_msg *msg) +{ + struct extron_port *port = cec_get_drvdata(adap); + + if (!vendor_id) + return -ENOMSG; + if (port->disconnected) + return -ENOMSG; + if (port->is_input) + return cec_splitter_received_input(&port->port, msg); + return cec_splitter_received_output(&port->port, msg, + port->extron->ports[port->extron->num_out_ports]->adap); +} + +#define log_printf(adap, file, fmt, arg...) \ + do { \ + if (file) \ + seq_printf((file), fmt, ## arg); \ + else \ + pr_info("cec-%s: " fmt, (adap)->name, ## arg); \ + } while (0) + +static const char * const pwr_state[] = { + "on", + "standby", + "to on", + "to standby", +}; + +static void extron_adap_status_port(struct extron_port *port, struct seq_file *file) +{ + struct cec_adapter *adap = port->adap; + + if (port->disconnected) { + log_printf(adap, file, + "\tport %u: disconnected\n", port->port.port); + return; + } + if (port->is_input) + log_printf(adap, file, + "\tport %u: %s signal, %s edid, %s 4kp30, %s 4kp60, %sQS/%sQY, is %s\n", + port->port.port, + port->has_signal ? "has" : "no", + port->has_edid ? "has" : "no", + port->has_4kp30 ? "has" : "no", + port->has_4kp60 ? "has" : "no", + port->has_qs ? "" : "no ", + port->has_qy ? "" : "no ", + !port->port.adap->is_configured ? "not configured" : + pwr_state[port->extron->splitter.is_standby]); + else + log_printf(adap, file, + "\tport %u: %s sink, %s signal, %s edid, %s 4kp30, %s 4kp60, %sQS/%sQY, is %sactive source, is %s\n", + port->port.port, + port->port.found_sink ? "found" : "no", + port->has_signal ? "has" : "no", + port->has_edid ? "has" : "no", + port->has_4kp30 ? "has" : "no", + port->has_4kp60 ? "has" : "no", + port->has_qs ? "" : "no ", + port->has_qy ? "" : "no ", + port->port.is_active_source ? "" : "not ", + !port->port.adap->is_configured ? "not configured" : + pwr_state[port->port.power_status & 3]); + if (port->port.out_give_device_power_status_seq) + log_printf(adap, file, + "\tport %u: querying power status (%u, %lldms)\n", + port->port.port, + port->port.out_give_device_power_status_seq & ~(1 << 31), + ktime_ms_delta(ktime_get(), + port->port.out_give_device_power_status_ts)); + if (port->port.out_request_current_latency_seq) + log_printf(adap, file, + "\tport %u: querying latency (%u, %lldms)\n", + port->port.port, + port->port.out_request_current_latency_seq & ~(1 << 31), + ktime_ms_delta(ktime_get(), + port->port.out_request_current_latency_ts)); +} + +static void extron_adap_status(struct cec_adapter *adap, struct seq_file *file) +{ + struct extron_port *port = cec_get_drvdata(adap); + struct extron *extron = port->extron; + unsigned int i; + + log_printf(adap, file, "name: %s type: %s\n", + extron->unit_name, extron->unit_type); + log_printf(adap, file, "model: 60-160%c-01 (1 input, %u outputs)\n", + '6' + extron->num_out_ports / 2, extron->num_out_ports); + log_printf(adap, file, "firmware version: %s CEC engine version: %s\n", + extron->unit_fw_version, extron->unit_cec_engine_version); + if (extron->hpd_never_low) + log_printf(adap, file, "always keep input HPD high\n"); + else + log_printf(adap, file, + "pull input HPD low if all output HPDs are low\n"); + if (vendor_id) + log_printf(adap, file, + "splitter vendor ID: 0x%06x\n", vendor_id); + if (manufacturer_name[0]) + log_printf(adap, file, "splitter manufacturer name: %s\n", + manufacturer_name); + log_printf(adap, file, "splitter power status: %s\n", + pwr_state[extron->splitter.is_standby]); + log_printf(adap, file, "%s port: %d (%s)\n", + port->is_input ? "input" : "output", + port->port.port, port->name); + log_printf(adap, file, "splitter input port:\n"); + extron_adap_status_port(extron->ports[extron->num_out_ports], file); + + log_printf(adap, file, "splitter output ports:\n"); + for (i = 0; i < extron->num_out_ports; i++) + extron_adap_status_port(extron->ports[i], file); + + if (!port->has_edid || !port->read_edid) + return; + + for (i = 0; i < port->edid_blocks * 128; i += 16) { + if (i % 128 == 0) + log_printf(adap, file, "\n"); + log_printf(adap, file, "EDID: %*ph\n", 16, port->edid + i); + } +} + +static const struct cec_adap_ops extron_cec_adap_ops = { + .adap_enable = extron_cec_adap_enable, + .adap_log_addr = extron_cec_adap_log_addr, + .adap_transmit = extron_cec_adap_transmit, + .adap_nb_transmit_canceled = extron_cec_adap_nb_transmit_canceled, + .adap_unconfigured = extron_cec_adap_unconfigured, + .adap_status = extron_adap_status, + .configured = extron_cec_configured, + .received = extron_received, +}; + +static int extron_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct extron_port *port = video_drvdata(file); + + strscpy(cap->driver, "extron-da-hd-4k-plus-cec", sizeof(cap->driver)); + strscpy(cap->card, cap->driver, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "serio:%s", port->name); + return 0; +} + +static int extron_enum_input(struct file *file, void *priv, struct v4l2_input *inp) +{ + struct extron_port *port = video_drvdata(file); + + if (inp->index) + return -EINVAL; + inp->type = V4L2_INPUT_TYPE_CAMERA; + snprintf(inp->name, sizeof(inp->name), "HDMI IN %u", port->port.port); + inp->status = v4l2_ctrl_g_ctrl(port->ctrl_rx_power_present) ? + 0 : V4L2_IN_ST_NO_SIGNAL; + return 0; +} + +static int extron_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int extron_s_input(struct file *file, void *priv, unsigned int i) +{ + return i ? -EINVAL : 0; +} + +static int extron_enum_output(struct file *file, void *priv, struct v4l2_output *out) +{ + struct extron_port *port = video_drvdata(file); + + if (out->index) + return -EINVAL; + out->type = V4L2_OUTPUT_TYPE_ANALOG; + snprintf(out->name, sizeof(out->name), "HDMI OUT %u", port->port.port); + return 0; +} + +static int extron_g_output(struct file *file, void *priv, unsigned int *o) +{ + *o = 0; + return 0; +} + +static int extron_s_output(struct file *file, void *priv, unsigned int o) +{ + return o ? -EINVAL : 0; +} + +static int extron_g_edid(struct file *file, void *_fh, + struct v4l2_edid *edid) +{ + struct extron_port *port = video_drvdata(file); + + memset(edid->reserved, 0, sizeof(edid->reserved)); + if (port->disconnected) + return -ENODEV; + if (edid->pad) + return -EINVAL; + if (!port->has_edid) + return -ENODATA; + if (!port->read_edid) + extron_read_edid(port); + if (!port->read_edid) + return -ENODATA; + if (edid->start_block == 0 && edid->blocks == 0) { + edid->blocks = port->edid_blocks; + return 0; + } + if (edid->start_block >= port->edid_blocks) + return -EINVAL; + if (edid->blocks > port->edid_blocks - edid->start_block) + edid->blocks = port->edid_blocks - edid->start_block; + memcpy(edid->edid, port->edid + edid->start_block * 128, edid->blocks * 128); + return 0; +} + +static int extron_s_edid(struct file *file, void *_fh, struct v4l2_edid *edid) +{ + struct extron_port *port = video_drvdata(file); + + memset(edid->reserved, 0, sizeof(edid->reserved)); + if (port->disconnected) + return -ENODEV; + if (edid->pad) + return -EINVAL; + + /* Unfortunately it is not possible to clear the EDID */ + if (edid->blocks == 0) + return -EINVAL; + + if (edid->blocks > MAX_EDID_BLOCKS) { + edid->blocks = MAX_EDID_BLOCKS; + return -E2BIG; + } + + if (cec_get_edid_spa_location(edid->edid, edid->blocks * 128)) + v4l2_set_edid_phys_addr(edid->edid, edid->blocks * 128, 0); + extron_parse_edid(port); + return extron_write_edid(port, edid->edid, edid->blocks); +} + +static int extron_log_status(struct file *file, void *priv) +{ + struct extron_port *port = video_drvdata(file); + + extron_adap_status(port->adap, NULL); + return v4l2_ctrl_log_status(file, priv); +} + +static const struct v4l2_ioctl_ops extron_ioctl_ops = { + .vidioc_querycap = extron_querycap, + .vidioc_enum_input = extron_enum_input, + .vidioc_g_input = extron_g_input, + .vidioc_s_input = extron_s_input, + .vidioc_enum_output = extron_enum_output, + .vidioc_g_output = extron_g_output, + .vidioc_s_output = extron_s_output, + .vidioc_g_edid = extron_g_edid, + .vidioc_s_edid = extron_s_edid, + .vidioc_log_status = extron_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_file_operations extron_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct video_device extron_videodev = { + .name = "extron-da-hd-4k-plus-cec", + .vfl_dir = VFL_DIR_RX, + .fops = &extron_fops, + .ioctl_ops = &extron_ioctl_ops, + .minor = -1, + .release = video_device_release_empty, +}; + +static void extron_disconnect(struct serio *serio) +{ + struct extron *extron = serio_get_drvdata(serio); + unsigned int p; + + kthread_stop(extron->kthread_setup); + + for (p = 0; p < extron->num_ports; p++) { + struct extron_port *port = extron->ports[p]; + + if (!port) + continue; + port->disconnected = true; + cancel_work_sync(&port->irq_work); + } + cancel_delayed_work_sync(&extron->work_update_edid); + for (p = 0; p < extron->num_ports; p++) { + struct extron_port *port = extron->ports[p]; + + if (!port) + continue; + + if (port->cec_was_registered) { + if (cec_is_registered(port->adap)) + cec_unregister_adapter(port->adap); + /* + * After registering the adapter, the + * extron_setup_thread() function took an extra + * reference to the device. We call the corresponding + * put here. + */ + cec_put_device(port->adap); + } else { + cec_delete_adapter(port->adap); + } + video_unregister_device(&port->vdev); + } + + complete(&extron->edid_completion); + + for (p = 0; p < extron->num_ports; p++) { + struct extron_port *port = extron->ports[p]; + + if (!port) + continue; + v4l2_ctrl_handler_free(&port->hdl); + mutex_destroy(&port->video_lock); + kfree(port); + } + mutex_destroy(&extron->edid_lock); + mutex_destroy(&extron->serio_lock); + extron->serio = NULL; + serio_set_drvdata(serio, NULL); + serio_close(serio); +} + +static int extron_setup(struct extron *extron) +{ + struct serio *serio = extron->serio; + struct extron_port *port; + u8 *reply = extron->reply; + unsigned int p; + unsigned int major, minor; + int err; + + /* + * Attempt to disable CEC: avoid received CEC messages + * from interfering with the other serial port traffic. + */ + extron_send_and_wait(extron, NULL, "WI1*0CCEC", NULL); + extron_send_and_wait(extron, NULL, "WO0*CCEC", NULL); + + /* Obtain unit part number */ + err = extron_send_and_wait(extron, NULL, "N", "Pno"); + if (err) + return err; + dev_info(extron->dev, "Unit part number: %s\n", reply + 3); + if (strcmp(reply + 3, "60-1607-01") && + strcmp(reply + 3, "60-1608-01") && + strcmp(reply + 3, "60-1609-01")) { + dev_err(extron->dev, "Unsupported model\n"); + return -ENODEV; + } + /* Up to 6 output ports and one input port */ + extron->num_out_ports = 2 * (reply[9] - '6'); + extron->splitter.num_out_ports = extron->num_out_ports; + extron->splitter.ports = extron->splitter_ports; + extron->splitter.dev = extron->dev; + extron->num_in_ports = 1; + extron->num_ports = extron->num_out_ports + extron->num_in_ports; + dev_info(extron->dev, "Unit output ports: %d\n", extron->num_out_ports); + dev_info(extron->dev, "Unit input ports: %d\n", extron->num_in_ports); + + err = extron_send_and_wait(extron, NULL, "W CN", "Ipn "); + if (err) + return err; + dev_info(extron->dev, "Unit name: %s\n", reply + 4); + strscpy(extron->unit_name, reply + 4, sizeof(extron->unit_name)); + + err = extron_send_and_wait(extron, NULL, "*Q", "Bld"); + if (err) + return err; + dev_info(extron->dev, "Unit FW Version: %s\n", reply + 3); + strscpy(extron->unit_fw_version, reply + 3, + sizeof(extron->unit_fw_version)); + if (sscanf(reply + 3, "%u.%u.", &major, &minor) < 2 || + major < 1 || minor < 2) { + dev_err(extron->dev, + "Unsupported FW version (only 1.02 or up is supported)\n"); + return -ENODEV; + } + + err = extron_send_and_wait(extron, NULL, "2i", "Inf02*"); + if (err) + return err; + dev_info(extron->dev, "Unit Type: %s\n", reply + 6); + strscpy(extron->unit_type, reply + 6, sizeof(extron->unit_type)); + + err = extron_send_and_wait(extron, NULL, "39Q", "Ver39*"); + if (err) + return err; + dev_info(extron->dev, "CEC Engine Version: %s\n", reply + 6); + strscpy(extron->unit_cec_engine_version, reply + 6, + sizeof(extron->unit_cec_engine_version)); + + /* Disable CEC */ + err = extron_send_and_wait(extron, NULL, "WI1*0CCEC", "CcecI1*"); + if (err) + return err; + err = extron_send_and_wait(extron, NULL, "WO0*CCEC", "CcecO0"); + if (err) + return err; + + extron->hpd_never_low = hpd_never_low; + + /* Pull input port HPD low if all output ports also have a low HPD */ + if (hpd_never_low) { + dev_info(extron->dev, "Always keep input HPD high\n"); + } else { + dev_info(extron->dev, "Pull input HPD low if all output HPDs are low\n"); + extron_send_and_wait(extron, NULL, "W1ihpd", "Ihpd1"); + } + + for (p = 0; p < extron->num_ports; p++) { + u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL; + + if (vendor_id) + caps &= ~CEC_CAP_LOG_ADDRS; + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + INIT_WORK(&port->irq_work, extron_irq_work_handler); + spin_lock_init(&port->msg_lock); + mutex_init(&port->video_lock); + port->extron = extron; + port->is_input = p >= extron->num_out_ports; + port->direction = port->is_input ? 'I' : 'O'; + port->port.port = 1 + (port->is_input ? p - extron->num_out_ports : p); + port->port.splitter = &extron->splitter; + port->phys_addr = CEC_PHYS_ADDR_INVALID; + snprintf(port->name, sizeof(port->name), "%s-%s-%u", + dev_name(&serio->dev), port->is_input ? "in" : "out", + port->port.port); + + port->dev = extron->dev; + port->adap = cec_allocate_adapter(&extron_cec_adap_ops, port, + port->name, caps, 1); + err = PTR_ERR_OR_ZERO(port->adap); + if (err < 0) { + kfree(port); + return err; + } + + port->adap->xfer_timeout_ms = EXTRON_TIMEOUT_SECS * 1000; + port->port.adap = port->adap; + port->vdev = extron_videodev; + port->vdev.lock = &port->video_lock; + port->vdev.v4l2_dev = &extron->v4l2_dev; + port->vdev.ctrl_handler = &port->hdl; + port->vdev.device_caps = V4L2_CAP_EDID; + video_set_drvdata(&port->vdev, port); + + v4l2_ctrl_handler_init(&port->hdl, 2); + + if (port->is_input) { + port->vdev.vfl_dir = VFL_DIR_RX; + port->ctrl_rx_power_present = + v4l2_ctrl_new_std(&port->hdl, NULL, + V4L2_CID_DV_RX_POWER_PRESENT, + 0, 1, 0, 0); + port->has_edid = true; + } else { + port->vdev.vfl_dir = VFL_DIR_TX; + port->ctrl_tx_hotplug = + v4l2_ctrl_new_std(&port->hdl, NULL, + V4L2_CID_DV_TX_HOTPLUG, + 0, 1, 0, 0); + port->ctrl_tx_edid_present = + v4l2_ctrl_new_std(&port->hdl, NULL, + V4L2_CID_DV_TX_EDID_PRESENT, + 0, 1, 0, 0); + } + + err = port->hdl.error; + if (err < 0) { + cec_delete_adapter(port->adap); + kfree(port); + return err; + } + extron->ports[p] = port; + extron->splitter_ports[p] = &port->port; + if (port->is_input && manufacturer_name[0]) + extron_write_edid(port, hdmi_edid, 2); + } + + /* Enable CEC (manual mode, i.e. controlled by the driver) */ + err = extron_send_and_wait(extron, NULL, "WI1*20CCEC", "CcecI1*"); + if (err) + return err; + + err = extron_send_and_wait(extron, NULL, "WO20*CCEC", "CcecO20"); + if (err) + return err; + + /* Set logical addresses to 15 */ + err = extron_send_and_wait(extron, NULL, "WI1*15LCEC", "LcecI1*15"); + if (err) + return err; + + for (p = 0; p < extron->num_out_ports; p++) { + char cmd[20]; + char resp[20]; + + snprintf(cmd, sizeof(cmd), "WO%u*15LCEC", p + 1); + snprintf(resp, sizeof(resp), "LcecO%u*15", p + 1); + err = extron_send_and_wait(extron, extron->ports[p], cmd, resp); + if (err) + return err; + } + + /* + * The Extron is now ready for operation. Specifically it is now + * possible to retrieve EDIDs. + */ + extron->is_ready = true; + + /* Query HDCP and Signal states, used to update the initial state */ + err = extron_send_and_wait(extron, NULL, "WHDCP", "Hdcp"); + if (err) + return err; + + return extron_send_and_wait(extron, NULL, "WLS", "Sig"); +} + +static int extron_setup_thread(void *_extron) +{ + struct extron *extron = _extron; + struct extron_port *port; + unsigned int p; + bool poll_splitter = false; + bool was_connected = true; + int err; + + while (1) { + if (kthread_should_stop()) + return 0; + err = extron_send_and_wait(extron, NULL, "W3CV", "Vrb3"); + // that should make it possible to detect a serio disconnect + // here by stopping the workqueue + if (err >= 0) + break; + was_connected = false; + ssleep(1); + } + + /* + * If the Extron was not connected at probe() time, i.e. it just got + * powered up and while the serial port is working, the firmware is + * still booting up, then wait 10 seconds for the firmware to settle. + * + * Trying to continue too soon means that some commands will not + * work yet. + */ + if (!was_connected) + ssleep(10); + + err = extron_setup(extron); + if (err) + goto disable_ports; + + for (p = 0; p < extron->num_ports; p++) { + struct cec_log_addrs log_addrs = {}; + + port = extron->ports[p]; + if (port->is_input && manufacturer_name[0]) + v4l2_disable_ioctl(&port->vdev, VIDIOC_S_EDID); + err = video_register_device(&port->vdev, VFL_TYPE_VIDEO, -1); + if (err) { + v4l2_err(&extron->v4l2_dev, "Failed to register video device\n"); + goto disable_ports; + } + + err = cec_register_adapter(port->adap, extron->dev); + if (err < 0) + goto disable_ports; + port->dev = &port->adap->devnode.dev; + port->cec_was_registered = true; + /* + * This driver is unusual in that the whole setup takes place + * in a thread since it can take such a long time before the + * Extron Splitter boots up, and you do not want to block the + * probe function on this driver. In addition, as soon as + * CEC adapters come online, they can be used, and you cannot + * just unregister them again if an error occurs, since that + * can delete the underlying CEC adapter, which might already + * be in use. + * + * So we take an additional reference to the adapter. This + * allows us to unregister the device node if needed, without + * deleting the actual adapter. + * + * In the disconnect function we will do the corresponding + * put call to ensure the adapter is deleted. + */ + cec_get_device(port->adap); + + /* + * If vendor_id wasn't set, then userspace configures the + * CEC devices. Otherwise the driver configures the CEC + * devices as TV (input) and Playback (outputs) devices + * and the driver processes all CEC messages. + */ + if (!vendor_id) + continue; + + log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0; + log_addrs.num_log_addrs = 1; + log_addrs.vendor_id = vendor_id; + if (port->is_input) { + strscpy(log_addrs.osd_name, "Splitter In", + sizeof(log_addrs.osd_name)); + log_addrs.log_addr_type[0] = CEC_LOG_ADDR_TYPE_TV; + log_addrs.primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_TV; + log_addrs.all_device_types[0] = CEC_OP_ALL_DEVTYPE_TV; + } else { + snprintf(log_addrs.osd_name, sizeof(log_addrs.osd_name), + "Splitter Out%u", port->port.port); + log_addrs.log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK; + log_addrs.primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_PLAYBACK; + log_addrs.all_device_types[0] = CEC_OP_ALL_DEVTYPE_PLAYBACK; + } + err = cec_s_log_addrs(port->adap, &log_addrs, false); + if (err < 0) + goto disable_ports; + } + poll_splitter = true; + + port = extron->ports[extron->num_out_ports]; + while (!kthread_should_stop()) { + ssleep(1); + if (hpd_never_low != extron->hpd_never_low) { + /* + * Keep input port HPD high at all times, or pull it low + * if all output ports also have a low HPD + */ + if (hpd_never_low) { + dev_info(extron->dev, "Always keep input HPD high\n"); + extron_send_and_wait(extron, NULL, "W0ihpd", "Ihpd0"); + } else { + dev_info(extron->dev, "Pull input HPD low if all output HPDs are low\n"); + extron_send_and_wait(extron, NULL, "W1ihpd", "Ihpd1"); + } + extron->hpd_never_low = hpd_never_low; + } + if (poll_splitter && + cec_splitter_poll(&extron->splitter, port->adap, debug) && + manufacturer_name[0]) { + /* + * Sinks were lost, so see if the input edid needs to + * be updated. + */ + cancel_delayed_work_sync(&extron->work_update_edid); + schedule_delayed_work(&extron->work_update_edid, + msecs_to_jiffies(1000)); + } + } + return 0; + +disable_ports: + extron->is_ready = false; + for (p = 0; p < extron->num_ports; p++) { + struct extron_port *port = extron->ports[p]; + + if (!port) + continue; + port->disconnected = true; + cancel_work_sync(&port->irq_work); + video_unregister_device(&port->vdev); + if (port->cec_was_registered) + cec_unregister_adapter(port->adap); + } + cancel_delayed_work_sync(&extron->work_update_edid); + complete(&extron->edid_completion); + dev_err(extron->dev, "Setup failed with error %d\n", err); + while (!kthread_should_stop()) + ssleep(1); + return err; +} + +static int extron_connect(struct serio *serio, struct serio_driver *drv) +{ + struct extron *extron; + int err = -ENOMEM; + + if (manufacturer_name[0] && + (!isupper(manufacturer_name[0]) || + !isupper(manufacturer_name[1]) || + !isupper(manufacturer_name[2]))) { + dev_warn(&serio->dev, "ignoring invalid manufacturer name\n"); + manufacturer_name[0] = 0; + } + + extron = kzalloc(sizeof(*extron), GFP_KERNEL); + + if (!extron) + return -ENOMEM; + + extron->serio = serio; + extron->dev = &serio->dev; + mutex_init(&extron->serio_lock); + mutex_init(&extron->edid_lock); + INIT_DELAYED_WORK(&extron->work_update_edid, update_edid_work); + + err = v4l2_device_register(extron->dev, &extron->v4l2_dev); + if (err) + goto free_device; + + err = serio_open(serio, drv); + if (err) + goto unreg_v4l2_dev; + + serio_set_drvdata(serio, extron); + init_completion(&extron->edid_completion); + + extron->kthread_setup = kthread_run(extron_setup_thread, extron, + "extron-da-hd-4k-plus-cec-%s", dev_name(&serio->dev)); + if (!IS_ERR(extron->kthread_setup)) + return 0; + + dev_err(extron->dev, "kthread_run() failed\n"); + err = PTR_ERR(extron->kthread_setup); + + extron->serio = NULL; + serio_set_drvdata(serio, NULL); + serio_close(serio); +unreg_v4l2_dev: + v4l2_device_unregister(&extron->v4l2_dev); +free_device: + mutex_destroy(&extron->edid_lock); + mutex_destroy(&extron->serio_lock); + kfree(extron); + return err; +} + +static const struct serio_device_id extron_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_EXTRON_DA_HD_4K_PLUS, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, extron_serio_ids); + +static struct serio_driver extron_drv = { + .driver = { + .name = "extron-da-hd-4k-plus-cec", + }, + .description = "Extron DA HD 4K PLUS HDMI CEC driver", + .id_table = extron_serio_ids, + .interrupt = extron_interrupt, + .connect = extron_connect, + .disconnect = extron_disconnect, +}; + +module_serio_driver(extron_drv); diff --git a/drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.h b/drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.h new file mode 100644 index 000000000000..b79f1253ab5d --- /dev/null +++ b/drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * Copyright 2021-2024 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _EXTRON_DA_HD_4K_PLUS_H_ +#define _EXTRON_DA_HD_4K_PLUS_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cec-splitter.h" + +#define DATA_SIZE 256 + +#define PING_PERIOD (15 * HZ) + +#define NUM_MSGS CEC_MAX_MSG_RX_QUEUE_SZ + +#define MAX_PORTS (1 + 6) + +#define MAX_EDID_BLOCKS 2 + +struct extron; + +struct extron_port { + struct cec_splitter_port port; + struct device *dev; + struct cec_adapter *adap; + struct video_device vdev; + struct v4l2_ctrl_handler hdl; + struct v4l2_ctrl *ctrl_rx_power_present; + struct v4l2_ctrl *ctrl_tx_hotplug; + struct v4l2_ctrl *ctrl_tx_edid_present; + bool is_input; + char direction; + char name[26]; + unsigned char edid[MAX_EDID_BLOCKS * 128]; + unsigned char edid_tmp[MAX_EDID_BLOCKS * 128]; + unsigned int edid_blocks; + bool read_edid; + struct extron *extron; + struct work_struct irq_work; + struct completion cmd_done; + const char *response; + unsigned int cmd_error; + struct cec_msg rx_msg[NUM_MSGS]; + unsigned int rx_msg_cur_idx, rx_msg_num; + /* protect rx_msg_cur_idx and rx_msg_num */ + spinlock_t msg_lock; + u32 tx_done_status; + bool update_phys_addr; + u16 phys_addr; + bool cec_was_registered; + bool disconnected; + bool update_has_signal; + bool has_signal; + bool update_has_edid; + bool has_edid; + bool has_4kp30; + bool has_4kp60; + bool has_qy; + bool has_qs; + u8 est_i, est_ii; + + /* locks access to the video_device */ + struct mutex video_lock; +}; + +struct extron { + struct cec_splitter splitter; + struct device *dev; + struct serio *serio; + /* locks access to serio */ + struct mutex serio_lock; + unsigned int num_ports; + unsigned int num_in_ports; + unsigned int num_out_ports; + char unit_name[32]; + char unit_type[64]; + char unit_fw_version[32]; + char unit_cec_engine_version[32]; + struct extron_port *ports[MAX_PORTS]; + struct cec_splitter_port *splitter_ports[MAX_PORTS]; + struct v4l2_device v4l2_dev; + bool hpd_never_low; + struct task_struct *kthread_setup; + struct delayed_work work_update_edid; + + /* serializes EDID reading */ + struct mutex edid_lock; + unsigned int edid_bytes_read; + struct extron_port *edid_port; + struct completion edid_completion; + bool edid_reading; + bool is_ready; + + struct completion cmd_done; + const char *response; + unsigned int cmd_error; + char data[DATA_SIZE]; + unsigned int len; + char reply[DATA_SIZE]; + char buf[DATA_SIZE]; + unsigned int idx; +}; + +#endif