mbox series

[v2,0/4] leds: bcm63138: Add some new bindings and code

Message ID 20240928-bcm63138-leds-v2-0-f6aa4d4d6ef2@linaro.org
Headers show
Series leds: bcm63138: Add some new bindings and code | expand

Message

Linus Walleij Sept. 27, 2024, 10:29 p.m. UTC 
This brings over the few know-how items and little things
I found about the BCMBCA LEDs in my previous duplicate driver.

This was tested on the BCM6846-based Genexis XG6846B.

The main addition is the ability to define the number shifting
bits in the serial shift register which is necessary if the
previous boot stages have not set up the hardware properly
before.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes in v2:
- Drop the u32 $ref in the schema, -bits is a standard suffix.
- Fix algorithm for shift register configuration.
- Fix spelling errors and numbering errors.
- Link to v1: https://lore.kernel.org/r/20240920-bcm63138-leds-v1-0-c150871324a0@linaro.org

---
Linus Walleij (4):
      dt-bindings: leds: bcm63138: Add shift register bits
      leds: bcm63138: Use scopes and guards
      leds: bcm63138: Handle shift register config
      leds: bcm63138: Add some register defines

 .../devicetree/bindings/leds/leds-bcm63138.yaml    | 12 ++++++++++
 drivers/leds/blink/leds-bcm63138.c                 | 28 ++++++++++++----------
 2 files changed, 28 insertions(+), 12 deletions(-)
---
base-commit: 5724faee6be4109d7a3168625357e4127f42b5d2
change-id: 20240920-bcm63138-leds-1bc5f41c47cd

Best regards,