mbox series

[v11,0/3] Add LED1202 LED Controller

Message ID 20241218183401.41687-1-vicentiu.galanopulo@remote-tech.co.uk
Headers show
Series Add LED1202 LED Controller | expand

Message

Vicentiu Galanopulo Dec. 18, 2024, 6:33 p.m. UTC 
The LED1202 is a 12-channel low quiescent current LED driver with:
  * Supply range from 2.6 V to 5 V
  * 20 mA current capability per channel
  * 1.8 V compatible I2C control interface
  * 8-bit analog dimming individual control
  * 12-bit local PWM resolution
  * 8 programmable patterns

Internal volatile memory allows the user to store up to 8 different patterns,
each pattern is a particular output configuration in terms of PWM
duty-cycle (on 4096 steps). Analog dimming (on 256 steps) is per channel but
common to all patterns. Each device tree LED node will have a corresponding
entry in /sys/class/leds with the label name. The brightness property
corresponds to the per channel analog dimming, while the patterns[1-8] to the
PWM dimming control.

Vicentiu Galanopulo (3):
  Documentation:leds: Add leds-st1202.rst
  dt-bindings: leds: Add LED1202 LED Controller
  leds: Add LED1202 I2C driver

---
   - Changes in v11: Add version history

 .../devicetree/bindings/leds/st,led1202.yaml  | 132 ++++++
 Documentation/leds/index.rst                  |   1 +
 Documentation/leds/leds-st1202.rst            |  34 ++
 drivers/leds/Kconfig                          |  10 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-st1202.c                    | 416 ++++++++++++++++++
 6 files changed, 594 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/st,led1202.yaml
 create mode 100644 Documentation/leds/leds-st1202.rst
 create mode 100644 drivers/leds/leds-st1202.c