From patchwork Mon Oct 30 10:04:47 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Florian Eckert X-Patchwork-Id: 740612 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0A975C4332F for ; Mon, 30 Oct 2023 10:15:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232787AbjJ3KPT (ORCPT ); Mon, 30 Oct 2023 06:15:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42314 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232856AbjJ3KO4 (ORCPT ); Mon, 30 Oct 2023 06:14:56 -0400 Received: from mxout70.expurgate.net (mxout70.expurgate.net [91.198.224.70]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3FA537D8B; Mon, 30 Oct 2023 03:05:01 -0700 (PDT) Received: from [127.0.0.1] (helo=localhost) by relay.expurgate.net with smtp (Exim 4.92) (envelope-from ) id 1qxP8j-0076ng-7s; Mon, 30 Oct 2023 11:04:57 +0100 Received: from [195.243.126.94] (helo=securemail.tdt.de) by relay.expurgate.net with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1qxP8i-004YdU-7S; Mon, 30 Oct 2023 11:04:56 +0100 Received: from securemail.tdt.de (localhost [127.0.0.1]) by securemail.tdt.de (Postfix) with ESMTP id BFDCF240049; Mon, 30 Oct 2023 11:04:55 +0100 (CET) Received: from mail.dev.tdt.de (unknown [10.2.4.42]) by securemail.tdt.de (Postfix) with ESMTP id 1DBAE24004B; Mon, 30 Oct 2023 11:04:55 +0100 (CET) Received: from localhost.localdomain (unknown [10.2.3.40]) by mail.dev.tdt.de (Postfix) with ESMTPSA id A1177223E0; Mon, 30 Oct 2023 11:04:54 +0100 (CET) From: Florian Eckert To: Eckert.Florian@googlemail.com, gregkh@linuxfoundation.org, jirislaby@kernel.org, pavel@ucw.cz, lee@kernel.org, kabel@kernel.org, u.kleine-koenig@pengutronix.de, m.brock@vanmierlo.com Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-leds@vger.kernel.org Subject: [Patch v6 7/7] leds: ledtrig-tty: add additional line state evaluation Date: Mon, 30 Oct 2023 11:04:47 +0100 Message-ID: <20231030100447.63477-8-fe@dev.tdt.de> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20231030100447.63477-1-fe@dev.tdt.de> References: <20231030100447.63477-1-fe@dev.tdt.de> MIME-Version: 1.0 X-purgate: clean X-purgate-ID: 151534::1698660296-DD37C1F7-B5F81EFC/0/0 X-purgate-type: clean Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The serial tty interface also supports additional input signals,that can also be evaluated within this trigger. This change is adding the following additional input sources, which could be controlled via the '/sys/class//' sysfs interface. Explanation: DCE = Data Communication Equipment (Modem) DTE = Data Terminal Equipment (Computer) - cts: DCE is ready to accept data from the DTE (CTS = Clear To Send). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate CTS. If set to 1, the LED will evaluate CTS. - dsr: DCE is ready to receive and send data (DSR = Data Set Ready). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate DSR. If set to 1, the LED will evaluate DSR. - dcd: DTE is receiving a carrier from the DCE (DCD = Data Carrier Detect). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate DCD. If set to 1, the LED will evaluate DCD. - rng: DCE has detected an incoming ring signal on the telephone line (RNG = Ring Indicator). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate RNG. If set to 1, the LED will evaluate RNG. Signed-off-by: Florian Eckert --- .../ABI/testing/sysfs-class-led-trigger-tty | 40 +++++++++++ drivers/leds/trigger/ledtrig-tty.c | 72 +++++++++++++++++++ 2 files changed, 112 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty index 504dece151b8..30cef9ac0f49 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-tty +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -20,3 +20,43 @@ Description: Signal transmission (tx) of data on the named tty device. If set to 0, the LED will not blink on transmission. If set to 1 (default), the LED will blink on transmission. + +What: /sys/class/leds//cts +Date: February 2024 +KernelVersion: 6.8 +Description: + CTS = Clear To Send + DCE is ready to accept data from the DTE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CTS. + If set to 1, the LED will evaluate CTS. + +What: /sys/class/leds//dsr +Date: February 2024 +KernelVersion: 6.8 +Description: + DSR = Data Set Ready + DCE is ready to receive and send data. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate DSR. + If set to 1, the LED will evaluate DSR. + +What: /sys/class/leds//dcd +Date: February 2024 +KernelVersion: 6.8 +Description: + DCD = Data Carrier Detect + DTE is receiving a carrier from the DCE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CAR (DCD). + If set to 1, the LED will evaluate CAR (DCD). + +What: /sys/class/leds//rng +Date: February 2024 +KernelVersion: 6.8 +Description: + RNG = Ring Indicator + DCE has detected an incoming ring signal on the telephone + line. If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate RNG. + If set to 1, the LED will evaluate RNG. diff --git a/drivers/leds/trigger/ledtrig-tty.c b/drivers/leds/trigger/ledtrig-tty.c index 1a40a78bf1ee..a364b7ca38c8 100644 --- a/drivers/leds/trigger/ledtrig-tty.c +++ b/drivers/leds/trigger/ledtrig-tty.c @@ -19,17 +19,26 @@ struct ledtrig_tty_data { int rx, tx; bool mode_rx; bool mode_tx; + bool mode_cts; + bool mode_dsr; + bool mode_dcd; + bool mode_rng; }; /* Indicates which state the LED should now display */ enum led_trigger_tty_state { TTY_LED_BLINK, + TTY_LED_ENABLE, TTY_LED_DISABLE, }; enum led_trigger_tty_modes { TRIGGER_TTY_RX = 0, TRIGGER_TTY_TX, + TRIGGER_TTY_CTS, + TRIGGER_TTY_DSR, + TRIGGER_TTY_DCD, + TRIGGER_TTY_RNG, }; static int ledtrig_tty_waitforcompletion(struct device *dev) @@ -118,6 +127,18 @@ static ssize_t ledtrig_tty_attr_show(struct device *dev, char *buf, case TRIGGER_TTY_TX: state = trigger_data->mode_tx; break; + case TRIGGER_TTY_CTS: + state = trigger_data->mode_cts; + break; + case TRIGGER_TTY_DSR: + state = trigger_data->mode_dsr; + break; + case TRIGGER_TTY_DCD: + state = trigger_data->mode_dcd; + break; + case TRIGGER_TTY_RNG: + state = trigger_data->mode_rng; + break; } return sysfs_emit(buf, "%u\n", state); @@ -147,6 +168,18 @@ static ssize_t ledtrig_tty_attr_store(struct device *dev, const char *buf, case TRIGGER_TTY_TX: trigger_data->mode_tx = state; break; + case TRIGGER_TTY_CTS: + trigger_data->mode_cts = state; + break; + case TRIGGER_TTY_DSR: + trigger_data->mode_dsr = state; + break; + case TRIGGER_TTY_DCD: + trigger_data->mode_dcd = state; + break; + case TRIGGER_TTY_RNG: + trigger_data->mode_rng = state; + break; } return size; @@ -167,6 +200,10 @@ static ssize_t ledtrig_tty_attr_store(struct device *dev, const char *buf, DEFINE_TTY_TRIGGER(rx, TRIGGER_TTY_RX); DEFINE_TTY_TRIGGER(tx, TRIGGER_TTY_TX); +DEFINE_TTY_TRIGGER(cts, TRIGGER_TTY_CTS); +DEFINE_TTY_TRIGGER(dsr, TRIGGER_TTY_DSR); +DEFINE_TTY_TRIGGER(dcd, TRIGGER_TTY_DCD); +DEFINE_TTY_TRIGGER(rng, TRIGGER_TTY_RNG); static void ledtrig_tty_work(struct work_struct *work) { @@ -175,6 +212,7 @@ static void ledtrig_tty_work(struct work_struct *work) struct led_classdev *led_cdev = trigger_data->led_cdev; enum led_trigger_tty_state state = TTY_LED_DISABLE; unsigned long interval = LEDTRIG_TTY_INTERVAL; + int status; int ret; if (!trigger_data->ttyname) @@ -202,6 +240,33 @@ static void ledtrig_tty_work(struct work_struct *work) trigger_data->tty = tty; } + status = tty_get_tiocm(trigger_data->tty); + if (status > 0) { + if (trigger_data->mode_cts) { + if (status & TIOCM_CTS) + state = TTY_LED_ENABLE; + } + + if (trigger_data->mode_dsr) { + if (status & TIOCM_DSR) + state = TTY_LED_ENABLE; + } + + if (trigger_data->mode_dcd) { + if (status & TIOCM_CAR) + state = TTY_LED_ENABLE; + } + + if (trigger_data->mode_rng) { + if (status & TIOCM_RNG) + state = TTY_LED_ENABLE; + } + } + + /* + * The evaluation of rx/tx must be done after the evaluation + * of TIOCM_*, because rx/tx has priority. + */ if (trigger_data->mode_rx || trigger_data->mode_tx) { struct serial_icounter_struct icount; @@ -225,6 +290,9 @@ static void ledtrig_tty_work(struct work_struct *work) case TTY_LED_BLINK: led_blink_set_oneshot(led_cdev, &interval, &interval, 0); break; + case TTY_LED_ENABLE: + led_set_brightness(led_cdev, led_cdev->blink_brightness); + break; case TTY_LED_DISABLE: fallthrough; default: @@ -241,6 +309,10 @@ static struct attribute *ledtrig_tty_attrs[] = { &dev_attr_ttyname.attr, &dev_attr_rx.attr, &dev_attr_tx.attr, + &dev_attr_cts.attr, + &dev_attr_dsr.attr, + &dev_attr_dcd.attr, + &dev_attr_rng.attr, NULL }; ATTRIBUTE_GROUPS(ledtrig_tty);