| Message ID | 20240624-sy7802-v5-3-7abc9d96bfa6@apitzsch.eu |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add sy7802 flash led driver | expand |
On 24.06.2024 11:25 PM, André Apitzsch via B4 Relay wrote: > From: André Apitzsch <git@apitzsch.eu> > > The phone has a Silergy SY7802 flash LED controller. > > Signed-off-by: André Apitzsch <git@apitzsch.eu> > --- > .../boot/dts/qcom/msm8939-longcheer-l9100.dts | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts > index e3404c4455cf..528737929274 100644 > --- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts > +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts > @@ -159,6 +159,25 @@ led@2 { > }; > }; > }; > + > + flash-led-controller@53 { > + compatible = "silergy,sy7802"; > + reg = <0x53>; > + #address-cells = <1>; > + #size-cells = <0>; #address-/size-cells usually go at the end, but looks good otherwise Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts index e3404c4455cf..528737929274 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts @@ -159,6 +159,25 @@ led@2 { }; }; }; + + flash-led-controller@53 { + compatible = "silergy,sy7802"; + reg = <0x53>; + #address-cells = <1>; + #size-cells = <0>; + + enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_rear_flash_default>; + pinctrl-names = "default"; + + led@0 { + reg = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + }; + }; }; &blsp_i2c3 { @@ -318,6 +337,13 @@ camera_front_flash_default: camera-front-flash-default-state { bias-disable; }; + camera_rear_flash_default: camera-rear-flash-default-state { + pins = "gpio9", "gpio16", "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio20"; function = "gpio";