mbox series

[v3,00/10] Generic line based metadata support, internal pads

Message ID 20230808075538.3043934-1-sakari.ailus@linux.intel.com
Headers show
Series Generic line based metadata support, internal pads | expand

Message

Sakari Ailus Aug. 8, 2023, 7:55 a.m. UTC
Hi folks,

Here are a few patches to add support generic, line based metadata as well
as internal pads. While the amount of code is not very large, to the
contrary it is quite small actually IMO, I presume what this is about and
why it is being proposed requires some explaining.

Metadata mbus codes and formats have existed for some time in V4L2. They
however have been only used by drivers that produce the data itself and
effectively this metadata has always been statistics of some sort (at
least when it comes to ISPs). What is different here is that we intend to
add support for metadata originating from camera sensors.

Camera sensors produce different kinds of metadata, embedded data (usually
register address--value pairs used to capture the frame, in a more or less
sensor specific format), histograms (in a very sensor specific format),
dark pixels etc. The number of these formats is probably going to be about
as large as image data formats if not larger, as the image data formats
are much better standardised but a smaller subset of them will be
supported by V4L2, at least initially but possibly much more in the long
run.

Having this many device specific formats would be a major problem for all
the other drivers along that pipeline (not to mention the users of those
drivers), including bridge (e.g. CSI-2 to parallel) but especially CSI-2
receiver drivers that have DMA: the poor driver developer would not only
need to know camera sensor specific formats but to choose the specific
packing of that format suitable for the DMA used by the hardware. It is
unlikely many of these would ever get tested while being present on the
driver API. Also adding new sensors with new embedded data formats would
involve updating all bridge and CSI-2 receiver drivers. I don't expect
this to be a workable approach.

Instead what I'm proposing is to use specific metadata formats on the
sensor devices only, on internal pads (more about those soon) of the
sensors, only visible in the UAPI, and then generic mbus formats along the
pipeline and finally generic V4L2 metadata formats on the DMAs (specific
to bit depth and packing). This would unsnarl the two, defining what data
there is (specific mbus code) and how that is transported and packed
(generic mbus codes and V4L2 formats).

The user space would be required to "know" the path of that data from the
sensor's internal pad to the V4L2 video node. I do not see this as these
devices require at least some knowledge of the pipeline, i.e. hardware at
hand. Separating what the data means and how it is packed may even be
beneficial: it allows separating code that interprets the data (sensor
internal mbus code) from the code that accesses it (packing).

These formats are in practice line based, meaning that there may be
padding at the end of the line, depending on the bus as well as the DMA.
If non-line based formats are needed, it is always possible to set the
"height" field to 1.

The internal (source) pads are an alternative to source routes [1]. The
source routes were not universally liked and I do have to say I like
re-using existing interface concepts (pads and everything you can do with
pads, including access format, selections etc.) wherever it makes sense,
instead of duplicating functionality.

Effectively internal source pads behave mostly just like sink pads, but
they describe a flow of data that originates from a sub-device instead of
arriving to a sub-device. The SUBDEV_S_ROUTING IOCTLs are used to enable
and disable routes from internal source pads to sub-device's source pads.
The subdev format IOCTLs are usable, too, so one can find which subdev
format is available on given internal source pad.

This set depends on these patches:

<URL:https://lore.kernel.org/linux-media/20230505205416.55002-1-sakari.ailus@linux.intel.com/T/#t>

I've also pushed these here and I'll keep updating the branch:

<URL:https://git.linuxtv.org/sailus/media_tree.git/log/?h=metadata>

Questions and comments are most welcome.

Driver support is to be added, as well as an example.

[1] <URL:https://lore.kernel.org/linux-media/20220831141357.1396081-20-tomi.valkeinen@ideasonboard.com/>

since v3:

- Add a better example, with formats.

- Add CCS static data media bus codes.

since v2:

- Added an example demonstrating the use of internal pads. --- Is the
  level of detail enough for the purpose?

- Improved documentation.

- Added a macro to tell whether a format is a metadata format.
  (Documentation could be added.)

- A small ReST syntax fix in the same section.

- Drop leftovers of a patch checking for the INTERNAL_SOURCE flag.

since v1:

- Make the new pad flag just "INTERNAL", requiring either SINK or SOURCE
  pad flag to accompany it. Removed the union in struct v4l2_subdev_route.

- Add the term "stream" to MC glossary.

- Improved and fixed documentation (according to comments).

- Note these formats are little endian.

- Remove 1X8 from the names of the mbus codes. These formats have generally
  8 bits per pixel.

- Fix mbus code numbering (had holes in RFC).

- Add new metadata fields to debug prints.

- Fix a minor documentation build issue.

Sakari Ailus (10):
  media: Documentation: Align numbered list
  media: mc: Check pad flag validity
  media: mc: Add INTERNAL pad flag
  media: uapi: Add generic serial metadata mbus formats
  media: uapi: Document which mbus format fields are valid for metadata
  media: uapi: Add a macro to tell whether an mbus code is metadata
  media: uapi: Add generic 8-bit metadata format definitions
  media: v4l: Support line-based metadata capture
  media: Add media bus codes for MIPI CCS embedded data
  media: uapi: v4l: Document source routes

 .../userspace-api/media/glossary.rst          |   6 +
 .../media/mediactl/media-types.rst            |   6 +
 .../userspace-api/media/v4l/dev-meta.rst      |  15 +
 .../userspace-api/media/v4l/dev-subdev.rst    | 206 ++++++++++-
 .../userspace-api/media/v4l/meta-formats.rst  |   1 +
 .../media/v4l/metafmt-generic.rst             | 331 ++++++++++++++++++
 .../media/v4l/subdev-formats.rst              | 289 +++++++++++++++
 .../media/v4l/vidioc-enum-fmt.rst             |   7 +
 .../media/videodev2.h.rst.exceptions          |   1 +
 drivers/media/mc/mc-entity.c                  |  17 +-
 drivers/media/v4l2-core/v4l2-ioctl.c          |  13 +-
 include/uapi/linux/media-bus-format.h         |  20 ++
 include/uapi/linux/media.h                    |   1 +
 include/uapi/linux/v4l2-mediabus.h            |  18 +-
 include/uapi/linux/videodev2.h                |  19 +
 15 files changed, 926 insertions(+), 24 deletions(-)
 create mode 100644 Documentation/userspace-api/media/v4l/metafmt-generic.rst