mbox series

[v4,00/15] media: i2c: ds90ub9xx: Misc fixes and improvements

Message ID 20241206-ub9xx-fixes-v4-0-466786eec7cc@ideasonboard.com
Headers show
Series media: i2c: ds90ub9xx: Misc fixes and improvements | expand

Message

Tomi Valkeinen Dec. 6, 2024, 8:26 a.m. UTC 
This series fixes various small issues in the drivers, and adds a few
things (a couple of pixel formats and a debugging feature).

It also takes a few steps in adding more i2c read/write error handlings
to the drivers, but covers only the easy places.

Adding error handling to all reads/writes needs more thinking, perhaps
adding a "ret" parameter to the calls, similar to the cci_* functions,
or perhaps adding helpers for writing multiple registers from a given
table. Also, in some places rolling back from an error will require
work.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
Changes in v4:
- Add Jai's Rb
- Use HZ_PER_MHZ in MHZ() macro
- Use num_rxports when setting up the DEBUG_I2C_RX_ID
- Add Reported-by's to patches that add error handling. Note: The
  patches don't close the issue, so I use "Link:" instead of "Closes:"
  as directed in Documentation/process/5.Posting.rst. However, checkpatch
  seems to want "Closes", so it warns about these.
- Link to v3: https://lore.kernel.org/r/20241204-ub9xx-fixes-v3-0-a933c109b323@ideasonboard.com

Changes in v3:
- Include bitfield.h for FIELD_PREP()
- Cc stable for relevant fixes
- Link to v2: https://lore.kernel.org/r/20241108-ub9xx-fixes-v2-0-c7db3b2ad89f@ideasonboard.com

Changes in v2:
- Address comments from Andy
- Add two new patches:
	- media: i2c: ds90ub960: Fix shadowing of local variables
	- media: i2c: ds90ub960: Use HZ_PER_MHZ
- Link to v1: https://lore.kernel.org/r/20241004-ub9xx-fixes-v1-0-e30a4633c786@ideasonboard.com

---
Tomi Valkeinen (15):
      media: i2c: ds90ub9x3: Fix extra fwnode_handle_put()
      media: i2c: ds90ub960: Fix UB9702 refclk register access
      media: i2c: ds90ub960: Fix use of non-existing registers on UB9702
      media: i2c: ds90ub960: Fix logging SP & EQ status only for UB9702
      media: i2c: ds90ub960: Fix UB9702 VC map
      media: i2c: ds90ub960: Use HZ_PER_MHZ
      media: i2c: ds90ub960: Add support for I2C_RX_ID
      media: i2c: ds90ub960: Add RGB24, RAW8 and RAW10 formats
      media: i2c: ds90ub953: Clear CRC errors in ub953_log_status()
      media: i2c: ds90ub960: Drop unused indirect block define
      media: i2c: ds90ub960: Reduce sleep in ub960_rxport_wait_locks()
      media: i2c: ds90ub960: Handle errors in ub960_log_status_ub960_sp_eq()
      media: i2c: ds90ub913: Add error handling to ub913_hw_init()
      media: i2c: ds90ub953: Add error handling for i2c reads/writes
      media: i2c: ds90ub960: Fix shadowing of local variables

 drivers/media/i2c/ds90ub913.c |  26 ++++--
 drivers/media/i2c/ds90ub953.c |  56 +++++++++----
 drivers/media/i2c/ds90ub960.c | 188 ++++++++++++++++++++++++++++--------------
 3 files changed, 188 insertions(+), 82 deletions(-)
---
base-commit: adc218676eef25575469234709c2d87185ca223a
change-id: 20241004-ub9xx-fixes-bba80dc48627

Best regards,