@@ -655,8 +655,6 @@ struct pxa_camera_dev {
const struct pxa_camera_format_xlate *current_fmt;
struct v4l2_pix_format current_pix;
- struct v4l2_async_subdev asd;
-
/*
* PXA27x is only supposed to handle one camera on its Quick Capture
* interface. If anyone ever builds hardware to enable more than
@@ -2189,11 +2187,11 @@ static int pxa_camera_resume(struct device *dev)
}
static int pxa_camera_pdata_from_dt(struct device *dev,
- struct pxa_camera_dev *pcdev,
- struct v4l2_async_subdev *asd)
+ struct pxa_camera_dev *pcdev)
{
u32 mclk_rate;
- struct device_node *remote, *np = dev->of_node;
+ struct v4l2_async_subdev *asd;
+ struct device_node *np = dev->of_node;
struct v4l2_fwnode_endpoint ep = { .bus_type = 0 };
int err = of_property_read_u32(np, "clock-frequency",
&mclk_rate);
@@ -2245,13 +2243,12 @@ static int pxa_camera_pdata_from_dt(struct device *dev,
if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
pcdev->platform_flags |= PXA_CAMERA_PCLK_EN;
- asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
- remote = of_graph_get_remote_port_parent(np);
- if (remote)
- asd->match.fwnode = of_fwnode_handle(remote);
- else
- dev_notice(dev, "no remote for %pOF\n", np);
-
+ asd = v4l2_async_notifier_add_fwnode_remote_subdev(
+ &pcdev->notifier,
+ of_fwnode_handle(np),
+ sizeof(*asd));
+ if (IS_ERR(asd))
+ err = PTR_ERR(asd);
out:
of_node_put(np);
@@ -2286,18 +2283,23 @@ static int pxa_camera_probe(struct platform_device *pdev)
if (IS_ERR(pcdev->clk))
return PTR_ERR(pcdev->clk);
+ v4l2_async_notifier_init(&pcdev->notifier);
pcdev->res = res;
-
pcdev->pdata = pdev->dev.platform_data;
if (pcdev->pdata) {
+ struct v4l2_async_subdev *asd;
+
pcdev->platform_flags = pcdev->pdata->flags;
pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
- pcdev->asd.match_type = V4L2_ASYNC_MATCH_I2C;
- pcdev->asd.match.i2c.adapter_id =
- pcdev->pdata->sensor_i2c_adapter_id;
- pcdev->asd.match.i2c.address = pcdev->pdata->sensor_i2c_address;
+ asd = v4l2_async_notifier_add_i2c_subdev(
+ &pcdev->notifier,
+ pcdev->pdata->sensor_i2c_adapter_id,
+ pcdev->pdata->sensor_i2c_address,
+ sizeof(*asd));
+ if (IS_ERR(asd))
+ err = PTR_ERR(asd);
} else if (pdev->dev.of_node) {
- err = pxa_camera_pdata_from_dt(&pdev->dev, pcdev, &pcdev->asd);
+ err = pxa_camera_pdata_from_dt(&pdev->dev, pcdev);
} else {
return -ENODEV;
}
@@ -2389,23 +2391,11 @@ static int pxa_camera_probe(struct platform_device *pdev)
if (err)
goto exit_deactivate;
- v4l2_async_notifier_init(&pcdev->notifier);
-
- err = v4l2_async_notifier_add_subdev(&pcdev->notifier, &pcdev->asd);
- if (err) {
- fwnode_handle_put(pcdev->asd.match.fwnode);
- goto exit_free_v4l2dev;
- }
-
- pcdev->notifier.ops = &pxa_camera_sensor_ops;
-
- if (!of_have_populated_dt())
- pcdev->asd.match_type = V4L2_ASYNC_MATCH_I2C;
-
err = pxa_camera_init_videobuf2(pcdev);
if (err)
goto exit_notifier_cleanup;
+ pcdev->notifier.ops = &pxa_camera_sensor_ops;
err = v4l2_async_notifier_register(&pcdev->v4l2_dev, &pcdev->notifier);
if (err)
goto exit_notifier_cleanup;
@@ -2413,7 +2403,6 @@ static int pxa_camera_probe(struct platform_device *pdev)
return 0;
exit_notifier_cleanup:
v4l2_async_notifier_cleanup(&pcdev->notifier);
-exit_free_v4l2dev:
v4l2_device_unregister(&pcdev->v4l2_dev);
exit_deactivate:
pxa_camera_deactivate(pcdev);
The use of v4l2_async_notifier_add_subdev is discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev. Use the appropriate helper: v4l2_async_notifier_add_i2c_subdev or v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> --- drivers/media/platform/pxa_camera.c | 53 ++++++++++++----------------- 1 file changed, 21 insertions(+), 32 deletions(-)