[12/17] media: camss: vfe-170: clean up some dead code

vfe_isr_read()/vfe_isr_halt_ack()/vfe_reg_clr() are never called.

vfe_isr_sof() does nothing, remove it.

The only vfe_reg_set() usage can be easily replaced with a writel.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 .../media/platform/qcom/camss/camss-vfe-170.c | 53 +------------------
 1 file changed, 2 insertions(+), 51 deletions(-)

On Tue, 11 May 2021 at 20:08, Jonathan Marek <jonathan@marek.ca> wrote:
>
> vfe_isr_read()/vfe_isr_halt_ack()/vfe_reg_clr() are never called.
>
> vfe_isr_sof() does nothing, remove it.
>
> The only vfe_reg_set() usage can be easily replaced with a writel.
>
> Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>  .../media/platform/qcom/camss/camss-vfe-170.c | 53 +------------------
>  1 file changed, 2 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
> index 8594d275b41d..076ca082e107 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
> @@ -188,20 +188,6 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
>         dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
>  }
>
> -static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
> -{
> -       u32 bits = readl_relaxed(vfe->base + reg);
> -
> -       writel_relaxed(bits & ~clr_bits, vfe->base + reg);
> -}
> -
> -static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
> -{
> -       u32 bits = readl_relaxed(vfe->base + reg);
> -
> -       writel_relaxed(bits | set_bits, vfe->base + reg);
> -}
> -
>  static void vfe_global_reset(struct vfe_device *vfe)
>  {
>         u32 reset_bits = GLOBAL_RESET_CMD_CORE          |
> @@ -305,32 +291,14 @@ static inline void vfe_reg_update_clear(struct vfe_device *vfe,
>
>  static void vfe_enable_irq_common(struct vfe_device *vfe)
>  {
> -       vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
> -       vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
> +       writel_relaxed(~0u, vfe->base + VFE_IRQ_MASK_0);
> +       writel_relaxed(~0u, vfe->base + VFE_IRQ_MASK_1);
>
>         writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
>         writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
>         writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
>  }
>
> -static void vfe_isr_halt_ack(struct vfe_device *vfe)
> -{
> -       complete(&vfe->halt_complete);
> -}
> -
> -static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
> -{
> -       *status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
> -       *status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
> -
> -       writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
> -       writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
> -
> -       /* Enforce ordering between IRQ Clear and Global IRQ Clear */
> -       wmb();
> -       writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
> -}
> -
>  static void vfe_violation_read(struct vfe_device *vfe)
>  {
>         u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
> @@ -375,10 +343,6 @@ static irqreturn_t vfe_isr(int irq, void *dev)
>                 if (status0 & STATUS_0_RDI_REG_UPDATE(i))
>                         vfe->isr_ops.reg_update(vfe, i);
>
> -       for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
> -               if (status0 & STATUS_1_RDI_SOF(i))
> -                       vfe->isr_ops.sof(vfe, i);
> -
>         for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
>                 if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
>                         vfe->isr_ops.comp_done(vfe, i);
> @@ -607,16 +571,6 @@ static int vfe_disable(struct vfe_line *line)
>         return 0;
>  }
>
> -/*
> - * vfe_isr_sof - Process start of frame interrupt
> - * @vfe: VFE Device
> - * @line_id: VFE line
> - */
> -static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
> -{
> -       /* nop */
> -}
> -
>  /*
>   * vfe_isr_reg_update - Process reg update interrupt
>   * @vfe: VFE Device
> @@ -749,9 +703,7 @@ static int vfe_queue_buffer(struct camss_video *vid,
>
>  static const struct vfe_isr_ops vfe_isr_ops_170 = {
>         .reset_ack = vfe_isr_reset_ack,
> -       .halt_ack = vfe_isr_halt_ack,
>         .reg_update = vfe_isr_reg_update,
> -       .sof = vfe_isr_sof,
>         .comp_done = vfe_isr_comp_done,
>         .wm_done = vfe_isr_wm_done,
>  };
> @@ -772,7 +724,6 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
>  const struct vfe_hw_ops vfe_ops_170 = {
>         .global_reset = vfe_global_reset,
>         .hw_version_read = vfe_hw_version_read,
> -       .isr_read = vfe_isr_read,
>         .isr = vfe_isr,
>         .pm_domain_off = vfe_pm_domain_off,
>         .pm_domain_on = vfe_pm_domain_on,

Gen1 & gen2 seem to diverge in terms of which ISR & helpers are
needed. Should the vfe_isr_ops & vfe_hw_ops structs have generation
based versions? I'm fine with a no here. There are diminishing returns
to this pedantism.

With ^^^ covered, feel free to add my r-b.

Reviewed-by: Robert Foss <robert.foss@linaro.org>