@@ -29,6 +29,8 @@ will feature a character device node on which ioctls can be called to
- negotiate image formats on individual pads
+- inspect and modify internal data routing between pads of the same entity
+
Sub-device character device nodes, conventionally named
``/dev/v4l-subdev*``, use major number 81.
@@ -70,6 +70,7 @@ Function Reference
vidioc-subdev-g-crop
vidioc-subdev-g-fmt
vidioc-subdev-g-frame-interval
+ vidioc-subdev-g-routing
vidioc-subdev-g-selection
vidioc-subdev-querycap
vidioc-subscribe-event
new file mode 100644
@@ -0,0 +1,146 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: V4L
+
+.. _VIDIOC_SUBDEV_G_ROUTING:
+
+******************************************************
+ioctl VIDIOC_SUBDEV_G_ROUTING, VIDIOC_SUBDEV_S_ROUTING
+******************************************************
+
+Name
+====
+
+VIDIOC_SUBDEV_G_ROUTING - VIDIOC_SUBDEV_S_ROUTING - Get or set routing between streams of media pads in a media entity.
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_ROUTING, struct v4l2_subdev_routing *argp )
+ :name: VIDIOC_SUBDEV_G_ROUTING
+
+.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_ROUTING, struct v4l2_subdev_routing *argp )
+ :name: VIDIOC_SUBDEV_S_ROUTING
+
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by :ref:`open() <func-open>`.
+
+``argp``
+ Pointer to struct :c:type:`v4l2_subdev_routing`.
+
+
+Description
+===========
+
+These ioctls are used to get and set the routing in a media entity.
+The routing configuration determines the flows of data inside an entity.
+
+Drivers report their current routing tables using the
+``VIDIOC_SUBDEV_G_ROUTING`` ioctl and application may enable or disable routes
+with the VIDIOC_SUBDEV_S_ROUTING ioctl, by adding or removing routes and setting
+or clearing the ``V4L2_SUBDEV_ROUTE_FL_ACTIVE`` flag of the ``flags`` field of
+a struct :c:type:`v4l2_subdev_route`.
+
+A special case for routing are routes marked with
+``V4L2_SUBDEV_ROUTE_FL_SOURCE`` flag. These routes are used to describe
+source endpoints on sensors and the sink fields are unused.
+
+When inspecting routes through VIDIOC_SUBDEV_G_ROUTING and the application
+provided ``num_routes`` is not big enough to contain all the available routes
+the subdevice exposes, drivers return the ENOSPC error code and adjust the
+value of the ``num_routes`` field. Application should then reserve enough memory
+for all the route entries and call VIDIOC_SUBDEV_G_ROUTING again.
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_subdev_routing
+
+.. flat-table:: struct v4l2_subdev_routing
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``which``
+ - Format to modified, from enum
+ :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+ * - struct :c:type:`v4l2_subdev_route`
+ - ``routes[]``
+ - Array of struct :c:type:`v4l2_subdev_route` entries
+ * - __u32
+ - ``num_routes``
+ - Number of entries of the routes array
+ * - __u32
+ - ``reserved``\ [5]
+ - Reserved for future extensions. Applications and drivers must set
+ the array to zero.
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. c:type:: v4l2_subdev_route
+
+.. flat-table:: struct v4l2_subdev_route
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``sink_pad``
+ - Sink pad number.
+ * - __u32
+ - ``sink_stream``
+ - Sink pad stream number.
+ * - __u32
+ - ``source_pad``
+ - Source pad number.
+ * - __u32
+ - ``source_stream``
+ - Source pad stream number.
+ * - __u32
+ - ``flags``
+ - Route enable/disable flags
+ :ref:`v4l2_subdev_routing_flags <v4l2-subdev-routing-flags>`.
+ * - __u32
+ - ``reserved``\ [5]
+ - Reserved for future extensions. Applications and drivers must set
+ the array to zero.
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+
+.. _v4l2-subdev-routing-flags:
+
+.. flat-table:: enum v4l2_subdev_routing_flags
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 4
+
+ * - V4L2_SUBDEV_ROUTE_FL_ACTIVE
+ - 0
+ - The route is enabled. Set by applications.
+ * - V4L2_SUBDEV_ROUTE_FL_IMMUTABLE
+ - 1
+ - The route is immutable. Set by the driver.
+ * - V4L2_SUBDEV_ROUTE_FL_SOURCE
+ - 2
+ - The route is a source route, and the ``sink_pad`` and ``sink_stream``
+ fields are unused. Set by the driver.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENOSPC
+ The number of provided route entries is less than the available ones.
+
+EINVAL
+ The sink or source pad identifiers reference a non-existing pad, or reference
+ pads of different types (ie. the sink_pad identifiers refers to a source pad)
+ or the sink or source stream identifiers reference a non-existing stream on
+ the sink or source pad.