| Message ID | 20230731-upstream_csi-v8-15-fb7d3661c2c9@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | CSI2RX support on J721E and AM62 | expand |
Hi Rob, On 31/07/23 15:01, Rob Herring wrote: > > On Mon, 31 Jul 2023 13:59:33 +0530, Jai Luthra wrote: >> From: Pratyush Yadav <p.yadav@ti.com> >> >> TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate >> capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the >> parts together. >> >> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> >> Signed-off-by: Jai Luthra <j-luthra@ti.com> >> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> Reviewed-by: Rob Herring <robh@kernel.org> >> --- >> v7->v8: >> - Drop "Device Tree Bindings" from title >> - Rename "Wrapper" to "Shim" in title as that is the name referred in >> the TRM and other places >> - Update maintainer to myself >> - Drop items from compatible as only a single element is present >> - Rename compatible to "ti,j721e-csi2rx-shim" to distinguish from the >> SoC-specific CSI2RX bridge compatible >> >> .../bindings/media/ti,j721e-csi2rx-shim.yaml | 100 +++++++++++++++++++++ >> 1 file changed, 100 insertions(+) >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml: > Error in referenced schema matching $id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: ticsi2rx@4500000: csi-bridge@4504000: False schema does not allow {'compatible': ['ti,j721e-csi2rx', 'cdns,csi2rx'], 'reg': [[72368128, 4096]], 'clocks': [[4294967295, 26, 2], [4294967295, 26, 0], [4294967295, 26, 2], [4294967295, 26, 2], [4294967295, 26, 3], [4294967295, 26, 3]], 'clock-names': ['sys_clk', 'p_clk', 'pixel_if0_clk', 'pixel_if1_clk', 'pixel_if2_clk', 'pixel_if3_clk'], 'phys': [[4294967295]], 'phy-names': ['dphy'], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]], 'bus-type': [[4]], 'clock-lanes': [[0]], 'data-lanes': [[1, 2]]}}}} > from schema $id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml# > Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: /example-0/ticsi2rx@4500000/csi-bridge@4504000: failed to match any schema with compatible: ['ti,j721e-csi2rx', 'cdns,csi2rx'] > Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: /example-0/ticsi2rx@4500000/csi-bridge@4504000: failed to match any schema with compatible: ['ti,j721e-csi2rx', 'cdns,csi2rx'] > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230731-upstream_csi-v8-15-fb7d3661c2c9@ti.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. Sorry I missed this warning from v7. This patch depends on 9536cc949235 ("media: dt-bindings: cadence-csi2rx: Convert to DT schema") which is part of linux-next. The base for this series should be linux-next/master https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git instead of 6.5-rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. >
diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml new file mode 100644 index 000000000000..f762fdc05e4d --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721E CSI2RX Shim + +description: | + The TI J721E CSI2RX Shim is a wrapper around Cadence CSI2RX bridge that + enables sending captured frames to memory over PSI-L DMA. In the J721E + Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the + CSI_RX_IF section. + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + const: ti,j721e-csi2rx-shim + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx0 + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + ranges: true + + "#address-cells": true + + "#size-cells": true + +patternProperties: + "^csi-bridge@": + type: object + description: CSI2 bridge node. + $ref: cdns,csi2rx.yaml# + +required: + - compatible + - reg + - dmas + - dma-names + - power-domains + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_udmap 0x4940>; + dma-names = "rx0"; + reg = <0x4500000 0x1000>; + power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cdns_csi2rx: csi-bridge@4504000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x4504000 0x1000>; + clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>, + <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + + reg = <0>; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + };