diff mbox series

[v4,8/9] media: ov2740: Add a sleep after resetting the sensor

Message ID 20231204123947.5754-9-hdegoede@redhat.com
State Accepted
Commit efff0a80bc66dcba08e4810fc9eb91c78d5586cf
Headers show
Series media: ov2740: reset GPIO, clk and 180 MHz link-frequency support | expand

Commit Message

Hans de Goede Dec. 4, 2023, 12:39 p.m. UTC 
Split the resetting of the sensor out of the link_freq_config reg_list
and add a delay after this.

This hopefully fixes the stream sometimes not starting, this was
taken from the ov2740 sensor driver in the out of tree IPU6 driver:

https://github.com/intel/ipu6-drivers/

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/media/i2c/ov2740.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index 3c58a6e0d7a0..552935ccb4a9 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -128,7 +128,6 @@  struct ov2740_mode {
 };
 
 static const struct ov2740_reg mipi_data_rate_720mbps[] = {
-	{0x0103, 0x01},
 	{0x0302, 0x4b},
 	{0x030d, 0x4b},
 	{0x030e, 0x02},
@@ -137,7 +136,6 @@  static const struct ov2740_reg mipi_data_rate_720mbps[] = {
 };
 
 static const struct ov2740_reg mipi_data_rate_360mbps[] = {
-	{0x0103, 0x01},
 	{0x0302, 0x4b},
 	{0x0303, 0x01},
 	{0x030d, 0x4b},
@@ -935,6 +933,15 @@  static int ov2740_start_streaming(struct ov2740 *ov2740)
 	if (ov2740->nvm)
 		ov2740_load_otp_data(ov2740->nvm);
 
+	/* Reset the sensor */
+	ret = ov2740_write_reg(ov2740, 0x0103, 1, 0x01);
+	if (ret) {
+		dev_err(&client->dev, "failed to reset\n");
+		return ret;
+	}
+
+	usleep_range(10000, 15000);
+
 	link_freq_index = ov2740->cur_mode->link_freq_index;
 	reg_list = &link_freq_configs[link_freq_index].reg_list;
 	ret = ov2740_write_reg_list(ov2740, reg_list);