From patchwork Mon May 27 13:58:05 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maxime Ripard X-Patchwork-Id: 799365 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 8EEA316D318; Mon, 27 May 2024 13:58:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716818333; cv=none; b=AMDQHuhNTuX8SnweF8JvKhmSdtSrRjSDVqxaTlSl/Vk0QLAtvH9SF9Z60puaekc7f/4PmcJFsxojq2j7vnb+PNz1xIKwIYdhUVW6mZQfRszM2DpYfwsMSUu9+yvXsDi6VZQS0Ap5x3JMRN5vqCKJBO4ErasH+fBxCI5ffhZ3eB4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716818333; c=relaxed/simple; bh=67B8qAf69XKci4QtCr3mNnPwFV3hUlKJAJwsS4JqCIo=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=Bjh/TiYjty4EYFSXQsNqG8hdnv6FrnNSkRxRLqi2emGYUXwnSSV/8EbAV2ITYxdVbdxYX6KoAA6RNOHqxd1u7E6lJYKhcT4Wa4KWJ8Js4DHz/77VEobRf6rMKkSc0HP9RTZzOqko3Q7kcLxjj76+4VaZBXkJHdPlvFeagvwHKfY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=e51unT7W; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="e51unT7W" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 8A5E4C2BBFC; Mon, 27 May 2024 13:58:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1716818333; bh=67B8qAf69XKci4QtCr3mNnPwFV3hUlKJAJwsS4JqCIo=; h=From:Date:Subject:References:In-Reply-To:To:Cc:From; b=e51unT7WmSvKSLcqZYc4qWFNfny8PRtpqGs4f11CxHUEczzbkKl/O0G9NQDwH8//o 7oBc8aJZiyIR9kDuTfyAJwNqUFT4Acvr2ywNesakCsWK7j1vb43pW+Ny9w6hLwEqNv Kmukm/NowVbEZPA1qW1c/5YHqKc40ewl/fOSOQXV9n26jzW7kYSgY6OCX2d9N7CyFP OYeeK3utdU6NVizbm0thf7Km4USLZrxDHt7xA/nt7jzKC6eM2FvNCrBUXHPyj32Clw hbsyHhTyhTD60VU2x+7RsFOrLquWCSIV8OxbN5aQZ7lcIXMA4CWa1LCitfu+gKpEHV bM3r2tuqLhvcA== From: Maxime Ripard Date: Mon, 27 May 2024 15:58:05 +0200 Subject: [PATCH v15 16/29] drm/tests: Add HDMI connector bpc and format tests Precedence: bulk X-Mailing-List: linux-media@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240527-kms-hdmi-connector-state-v15-16-c5af16c3aae2@kernel.org> References: <20240527-kms-hdmi-connector-state-v15-0-c5af16c3aae2@kernel.org> In-Reply-To: <20240527-kms-hdmi-connector-state-v15-0-c5af16c3aae2@kernel.org> To: Maarten Lankhorst , Thomas Zimmermann , David Airlie , Daniel Vetter , Jonathan Corbet , Sandy Huang , =?utf-8?q?Heiko_St=C3=BCbner?= , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Andy Yan Cc: Hans Verkuil , Sebastian Wick , =?utf-8?b?VmlsbGUgU3lyasOkbMOk?= , dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-sunxi@lists.linux.dev, Maxime Ripard , Dmitry Baryshkov X-Mailer: b4 0.13.0 X-Developer-Signature: v=1; a=openpgp-sha256; l=27716; i=mripard@kernel.org; h=from:subject:message-id; bh=67B8qAf69XKci4QtCr3mNnPwFV3hUlKJAJwsS4JqCIo=; b=kA0DAAkTJ1/OGaI9vnYByyZiAGZUkWeiB46+bUBy4tsisq1UFRvh/7/RoUlJHBXNxr5rf4SDv IiVBAATCQAdFiEE5BxWy6eHo3pAP6n4J1/OGaI9vnYFAmZUkWcACgkQJ1/OGaI9vnbTiQF/RbYa x54j2RCjw7NkX3dFoN4FSHsWoSPynt5vmxPIZzTf5kPLklbxBM9c1Al2T4VlAX9H1AUtBSxLh6z 5aNE1Ilf/zCkimWMiKZdKIfBLn0Hpq3En1g2m12mJtys6LqeliFM= X-Developer-Key: i=mripard@kernel.org; a=openpgp; fpr=BE5675C37E818C8B5764241C254BCFC56BF6CE8D The previous patch added the bpc and format an HDMI connector needs to be set up with for a given connector state. Let's add a few tests to make sure it works as expected. Reviewed-by: Dmitry Baryshkov Signed-off-by: Maxime Ripard --- drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 509 +++++++++++++++++++++ drivers/gpu/drm/tests/drm_kunit_edid.h | 160 +++++++ 2 files changed, 669 insertions(+) diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c index a49a544d7b49..968204781928 100644 --- a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c +++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c @@ -15,10 +15,11 @@ #include #include #include #include +#include #include #include "../drm_crtc_internal.h" #include @@ -370,10 +371,60 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test) crtc_state = drm_atomic_get_new_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed); } +/* + * Test that if we have an HDMI connector but a !HDMI display, we always + * output RGB with 8 bpc. + */ +static void drm_test_check_output_bpc_dvi(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *preferred; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB) | + BIT(HDMI_COLORSPACE_YUV422) | + BIT(HDMI_COLORSPACE_YUV444), + 12); + KUNIT_ASSERT_NOT_NULL(test, priv); + + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_dvi_1080p, + ARRAY_SIZE(test_edid_dvi_1080p)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_FALSE(test, info->is_hdmi); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + preferred = find_preferred_mode(conn); + KUNIT_ASSERT_NOT_NULL(test, preferred); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + KUNIT_ASSERT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); +} + /* * Test that when doing a commit which would use RGB 8bpc, the TMDS * clock rate stored in the connector state is equal to the mode clock */ static void drm_test_check_tmds_char_rate_rgb_8bpc(struct kunit *test) @@ -562,14 +613,472 @@ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test) ret = drm_atomic_check_only(state); KUNIT_EXPECT_LT(test, ret, 0); } +/* + * Test that if: + * - We have an HDMI connector supporting RGB only + * - The chosen mode has a TMDS character rate higher than the display + * supports in RGB/12bpc + * - The chosen mode has a TMDS character rate lower than the display + * supports in RGB/10bpc. + * + * Then we will pick the latter, and the computed TMDS character rate + * will be equal to 1.25 times the mode pixel clock. + */ +static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *preferred; + unsigned long long rate; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB), + 12); + KUNIT_ASSERT_NOT_NULL(test, priv); + + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_TRUE(test, info->is_hdmi); + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + preferred = find_preferred_mode(conn); + KUNIT_ASSERT_NOT_NULL(test, preferred); + KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK); + + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); + + rate = drm_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + KUNIT_EXPECT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250); +} + +/* + * Test that if: + * - We have an HDMI connector supporting both RGB and YUV422 and up to + * 12 bpc + * - The chosen mode has a TMDS character rate higher than the display + * supports in RGB/12bpc but lower than the display supports in + * RGB/10bpc + * - The chosen mode has a TMDS character rate lower than the display + * supports in YUV422/12bpc. + * + * Then we will prefer to keep the RGB format with a lower bpc over + * picking YUV422. + */ +static void drm_test_check_max_tmds_rate_format_fallback(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *preferred; + unsigned long long rate; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB) | + BIT(HDMI_COLORSPACE_YUV422) | + BIT(HDMI_COLORSPACE_YUV444), + 12); + KUNIT_ASSERT_NOT_NULL(test, priv); + + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_TRUE(test, info->is_hdmi); + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + preferred = find_preferred_mode(conn); + KUNIT_ASSERT_NOT_NULL(test, preferred); + KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK); + + rate = drm_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); + + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422); + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + KUNIT_EXPECT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); +} + +/* + * Test that if a driver and screen supports RGB and YUV formats, and we + * try to set the VIC 1 mode, we end up with 8bpc RGB even if we could + * have had a higher bpc. + */ +static void drm_test_check_output_bpc_format_vic_1(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *mode; + unsigned long long rate; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB) | + BIT(HDMI_COLORSPACE_YUV422) | + BIT(HDMI_COLORSPACE_YUV444), + 12); + KUNIT_ASSERT_NOT_NULL(test, priv); + + drm = &priv->drm; + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_TRUE(test, info->is_hdmi); + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + mode = drm_display_mode_from_cea_vic(drm, 1); + KUNIT_ASSERT_NOT_NULL(test, mode); + + /* + * NOTE: We can't use drm_hdmi_compute_mode_clock() + * here because we're trying to get the rate of an invalid + * configuration. + * + * Thus, we have to calculate the rate by hand. + */ + rate = mode->clock * 1500; + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, mode, ctx); + KUNIT_EXPECT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); +} + +/* + * Test that if a driver supports only RGB but the screen also supports + * YUV formats, we only end up with an RGB format. + */ +static void drm_test_check_output_bpc_format_driver_rgb_only(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *preferred; + unsigned long long rate; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB), + 12); + KUNIT_ASSERT_NOT_NULL(test, priv); + + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_TRUE(test, info->is_hdmi); + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + preferred = find_preferred_mode(conn); + KUNIT_ASSERT_NOT_NULL(test, preferred); + + /* + * We're making sure that YUV422 would be the preferred option + * here: we're always favouring higher bpc, we can't have RGB + * because the TMDS character rate exceeds the maximum supported + * by the display, and YUV422 works for that display. + * + * But since the driver only supports RGB, we should fallback to + * a lower bpc with RGB. + */ + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); + + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422); + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + KUNIT_EXPECT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); +} + +/* + * Test that if a screen supports only RGB but the driver also supports + * YUV formats, we only end up with an RGB format. + */ +static void drm_test_check_output_bpc_format_display_rgb_only(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *preferred; + unsigned long long rate; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB) | + BIT(HDMI_COLORSPACE_YUV422) | + BIT(HDMI_COLORSPACE_YUV444), + 12); + KUNIT_ASSERT_NOT_NULL(test, priv); + + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_max_200mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_TRUE(test, info->is_hdmi); + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + preferred = find_preferred_mode(conn); + KUNIT_ASSERT_NOT_NULL(test, preferred); + + /* + * We're making sure that YUV422 would be the preferred option + * here: we're always favouring higher bpc, we can't have RGB + * because the TMDS character rate exceeds the maximum supported + * by the display, and YUV422 works for that display. + * + * But since the display only supports RGB, we should fallback to + * a lower bpc with RGB. + */ + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); + + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422); + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + KUNIT_EXPECT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); +} + +/* + * Test that if a display supports higher bpc but the driver only + * supports 8 bpc, we only end up with 8 bpc even if we could have had a + * higher bpc. + */ +static void drm_test_check_output_bpc_format_driver_8bpc_only(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *preferred; + unsigned long long rate; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB), + 8); + KUNIT_ASSERT_NOT_NULL(test, priv); + + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_TRUE(test, info->is_hdmi); + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + preferred = find_preferred_mode(conn); + KUNIT_ASSERT_NOT_NULL(test, preferred); + + /* + * We're making sure that we have headroom on the TMDS character + * clock to actually use 12bpc. + */ + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + KUNIT_EXPECT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); +} + +/* + * Test that if a driver supports higher bpc but the display only + * supports 8 bpc, we only end up with 8 bpc even if we could have had a + * higher bpc. + */ +static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *test) +{ + struct drm_atomic_helper_connector_hdmi_priv *priv; + struct drm_modeset_acquire_ctx *ctx; + struct drm_connector_state *conn_state; + struct drm_display_info *info; + struct drm_display_mode *preferred; + unsigned long long rate; + struct drm_connector *conn; + struct drm_device *drm; + struct drm_crtc *crtc; + int ret; + + priv = drm_atomic_helper_connector_hdmi_init(test, + BIT(HDMI_COLORSPACE_RGB) | + BIT(HDMI_COLORSPACE_YUV422) | + BIT(HDMI_COLORSPACE_YUV444), + 12); + KUNIT_ASSERT_NOT_NULL(test, priv); + + conn = &priv->connector; + ret = set_connector_edid(test, conn, + test_edid_hdmi_1080p_rgb_max_340mhz, + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_340mhz)); + KUNIT_ASSERT_EQ(test, ret, 0); + + info = &conn->display_info; + KUNIT_ASSERT_TRUE(test, info->is_hdmi); + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0); + + ctx = drm_kunit_helper_acquire_ctx_alloc(test); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + preferred = find_preferred_mode(conn); + KUNIT_ASSERT_NOT_NULL(test, preferred); + + /* + * We're making sure that we have headroom on the TMDS character + * clock to actually use 12bpc. + */ + rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); + + drm = &priv->drm; + crtc = priv->crtc; + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + KUNIT_EXPECT_EQ(test, ret, 0); + + conn_state = conn->state; + KUNIT_ASSERT_NOT_NULL(test, conn_state); + + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); +} + static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = { KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate), + KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback), + KUNIT_CASE(drm_test_check_max_tmds_rate_format_fallback), KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed), KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed), + KUNIT_CASE(drm_test_check_output_bpc_dvi), + KUNIT_CASE(drm_test_check_output_bpc_format_vic_1), + KUNIT_CASE(drm_test_check_output_bpc_format_display_8bpc_only), + KUNIT_CASE(drm_test_check_output_bpc_format_display_rgb_only), + KUNIT_CASE(drm_test_check_output_bpc_format_driver_8bpc_only), + KUNIT_CASE(drm_test_check_output_bpc_format_driver_rgb_only), KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_8bpc), KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_10bpc), KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_12bpc), /* * TODO: We should have tests to check that a change in the diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h index ed051d356d5e..cda410440aca 100644 --- a/drivers/gpu/drm/tests/drm_kunit_edid.h +++ b/drivers/gpu/drm/tests/drm_kunit_edid.h @@ -1,8 +1,66 @@ #ifndef DRM_KUNIT_EDID_H_ #define DRM_KUNIT_EDID_H_ +/* + * edid-decode (hex): + * + * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00 + * 00 21 01 03 81 a0 5a 78 0a 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01 + * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c + * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73 + * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32 + * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab + * + * ---------------- + * + * Block 0, Base EDID: + * EDID Structure Version & Revision: 1.3 + * Vendor & Product Identification: + * Manufacturer: LNX + * Model: 42 + * Made in: 2023 + * Basic Display Parameters & Features: + * Digital display + * DFP 1.x compatible TMDS + * Maximum image size: 160 cm x 90 cm + * Gamma: 2.20 + * RGB color display + * First detailed timing is the preferred timing + * Color Characteristics: + * Red : 0.0000, 0.0000 + * Green: 0.0000, 0.0000 + * Blue : 0.0000, 0.0000 + * White: 0.0000, 0.0000 + * Established Timings I & II: none + * Standard Timings: none + * Detailed Timing Descriptors: + * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm) + * Hfront 88 Hsync 44 Hback 148 Hpol P + * Vfront 4 Vsync 5 Vback 36 Vpol P + * Display Product Name: 'Test EDID' + * Display Range Limits: + * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz + * Dummy Descriptor: + * Checksum: 0xab + */ +static const unsigned char test_edid_dvi_1080p[] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38, + 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44, + 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32, + 0x46, 0x1e, 0x46, 0x0f, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xab +}; + /* * edid-decode (hex): * * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00 * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00 @@ -101,10 +159,112 @@ static const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd0 }; +/* + * edid-decode (hex): + * + * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00 + * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00 + * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01 + * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c + * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73 + * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32 + * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 92 + * + * 02 03 1b 81 e3 05 00 20 41 10 e2 00 4a 6d 03 0c + * 00 12 34 00 28 20 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0 + * + * ---------------- + * + * Block 0, Base EDID: + * EDID Structure Version & Revision: 1.3 + * Vendor & Product Identification: + * Manufacturer: LNX + * Model: 42 + * Made in: 2023 + * Basic Display Parameters & Features: + * Digital display + * DFP 1.x compatible TMDS + * Maximum image size: 160 cm x 90 cm + * Gamma: 2.20 + * Monochrome or grayscale display + * First detailed timing is the preferred timing + * Color Characteristics: + * Red : 0.0000, 0.0000 + * Green: 0.0000, 0.0000 + * Blue : 0.0000, 0.0000 + * White: 0.0000, 0.0000 + * Established Timings I & II: + * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz + * Standard Timings: none + * Detailed Timing Descriptors: + * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm) + * Hfront 88 Hsync 44 Hback 148 Hpol P + * Vfront 4 Vsync 5 Vback 36 Vpol P + * Display Product Name: 'Test EDID' + * Display Range Limits: + * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz + * Dummy Descriptor: + * Extension blocks: 1 + * Checksum: 0x92 + * + * ---------------- + * + * Block 1, CTA-861 Extension Block: + * Revision: 3 + * Underscans IT Video Formats by default + * Native detailed modes: 1 + * Colorimetry Data Block: + * sRGB + * Video Data Block: + * VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz + * Video Capability Data Block: + * YCbCr quantization: No Data + * RGB quantization: Selectable (via AVI Q) + * PT scan behavior: No Data + * IT scan behavior: Always Underscanned + * CE scan behavior: Always Underscanned + * Vendor-Specific Data Block (HDMI), OUI 00-0C-03: + * Source physical address: 1.2.3.4 + * Maximum TMDS clock: 340 MHz + * Extended HDMI video details: + * Checksum: 0xd0 Unused space in Extension Block: 100 bytes + */ +static const unsigned char test_edid_hdmi_1080p_rgb_max_340mhz[] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78, + 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, + 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38, + 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44, + 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32, + 0x46, 0x00, 0x00, 0xc4, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x41, 0x02, 0x03, 0x1b, 0x81, + 0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0x4a, 0x6d, 0x03, 0x0c, + 0x00, 0x12, 0x34, 0x00, 0x44, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xd0 +}; + /* * edid-decode (hex): * * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00 * 00 21 01 03 81 a0 5a 78 1a 00 00 00 00 00 00 00