diff mbox series

[v3,3/4] optee: sync secure world ABI headers

Message ID 20241128150927.1377981-4-jens.wiklander@linaro.org
State New
Headers show
Series TEE subsystem for restricted dma-buf allocations | expand

Commit Message

Jens Wiklander Nov. 28, 2024, 3:09 p.m. UTC
Update the header files describing the secure world ABI, both with and
without FF-A. The ABI is extended to deal with restricted memory, but as
usual backward compatible.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
 drivers/tee/optee/optee_ffa.h | 27 ++++++++++---
 drivers/tee/optee/optee_msg.h | 65 ++++++++++++++++++++++++++++++--
 drivers/tee/optee/optee_smc.h | 71 ++++++++++++++++++++++++++++++++++-
 3 files changed, 154 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tee/optee/optee_ffa.h b/drivers/tee/optee/optee_ffa.h
index 257735ae5b56..7bd037200343 100644
--- a/drivers/tee/optee/optee_ffa.h
+++ b/drivers/tee/optee/optee_ffa.h
@@ -81,7 +81,7 @@ 
  *                   as the second MSG arg struct for
  *                   OPTEE_FFA_YIELDING_CALL_WITH_ARG.
  *        Bit[31:8]: Reserved (MBZ)
- * w5:	  Bitfield of secure world capabilities OPTEE_FFA_SEC_CAP_* below,
+ * w5:	  Bitfield of OP-TEE capabilities OPTEE_FFA_SEC_CAP_*
  * w6:	  The maximum secure world notification number
  * w7:	  Not used (MBZ)
  */
@@ -94,6 +94,8 @@ 
 #define OPTEE_FFA_SEC_CAP_ASYNC_NOTIF	BIT(1)
 /* OP-TEE supports probing for RPMB device if needed */
 #define OPTEE_FFA_SEC_CAP_RPMB_PROBE	BIT(2)
+/* OP-TEE supports Restricted Memory for secure data path */
+#define OPTEE_FFA_SEC_CAP_RSTMEM	BIT(3)
 
 #define OPTEE_FFA_EXCHANGE_CAPABILITIES OPTEE_FFA_BLOCKING_CALL(2)
 
@@ -108,7 +110,7 @@ 
  *
  * Return register usage:
  * w3:    Error code, 0 on success
- * w4-w7: Note used (MBZ)
+ * w4-w7: Not used (MBZ)
  */
 #define OPTEE_FFA_UNREGISTER_SHM	OPTEE_FFA_BLOCKING_CALL(3)
 
@@ -119,16 +121,31 @@ 
  * Call register usage:
  * w3:    Service ID, OPTEE_FFA_ENABLE_ASYNC_NOTIF
  * w4:	  Notification value to request bottom half processing, should be
- *	  less than OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE.
+ *	  less than OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE
  * w5-w7: Not used (MBZ)
  *
  * Return register usage:
  * w3:    Error code, 0 on success
- * w4-w7: Note used (MBZ)
+ * w4-w7: Not used (MBZ)
  */
 #define OPTEE_FFA_ENABLE_ASYNC_NOTIF	OPTEE_FFA_BLOCKING_CALL(5)
 
-#define OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE 64
+#define OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE	64
+
+/*
+ * Release Restricted memory
+ *
+ * Call register usage:
+ * w3:    Service ID, OPTEE_FFA_RECLAIM_RSTMEM
+ * w4:    Shared memory handle, lower bits
+ * w5:    Shared memory handle, higher bits
+ * w6-w7: Not used (MBZ)
+ *
+ * Return register usage:
+ * w3:    Error code, 0 on success
+ * w4-w7: Note used (MBZ)
+ */
+#define OPTEE_FFA_RELEASE_RSTMEM	OPTEE_FFA_BLOCKING_CALL(8)
 
 /*
  * Call with struct optee_msg_arg as argument in the supplied shared memory
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
index e8840a82b983..1b558526e7d9 100644
--- a/drivers/tee/optee/optee_msg.h
+++ b/drivers/tee/optee/optee_msg.h
@@ -133,13 +133,13 @@  struct optee_msg_param_rmem {
 };
 
 /**
- * struct optee_msg_param_fmem - ffa memory reference parameter
+ * struct optee_msg_param_fmem - FF-A memory reference parameter
  * @offs_lower:	   Lower bits of offset into shared memory reference
  * @offs_upper:	   Upper bits of offset into shared memory reference
  * @internal_offs: Internal offset into the first page of shared memory
  *		   reference
  * @size:	   Size of the buffer
- * @global_id:	   Global identifier of Shared memory
+ * @global_id:	   Global identifier of the shared memory
  */
 struct optee_msg_param_fmem {
 	u32 offs_low;
@@ -165,7 +165,7 @@  struct optee_msg_param_value {
  * @attr:	attributes
  * @tmem:	parameter by temporary memory reference
  * @rmem:	parameter by registered memory reference
- * @fmem:	parameter by ffa registered memory reference
+ * @fmem:	parameter by FF-A registered memory reference
  * @value:	parameter by opaque value
  * @octets:	parameter by octet string
  *
@@ -296,6 +296,18 @@  struct optee_msg_arg {
  */
 #define OPTEE_MSG_FUNCID_GET_OS_REVISION	0x0001
 
+/*
+ * Values used in OPTEE_MSG_CMD_LEND_RSTMEM below
+ * OPTEE_MSG_RSTMEM_RESERVED		Reserved
+ * OPTEE_MSG_RSTMEM_SECURE_VIDEO_PLAY	Secure Video Playback
+ * OPTEE_MSG_RSTMEM_TRUSTED_UI		Trused UI
+ * OPTEE_MSG_RSTMEM_SECURE_VIDEO_RECORD	Secure Video Recording
+ */
+#define OPTEE_MSG_RSTMEM_RESERVED		0
+#define OPTEE_MSG_RSTMEM_SECURE_VIDEO_PLAY	1
+#define OPTEE_MSG_RSTMEM_TRUSTED_UI		2
+#define OPTEE_MSG_RSTMEM_SECURE_VIDEO_RECORD	3
+
 /*
  * Do a secure call with struct optee_msg_arg as argument
  * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd
@@ -337,6 +349,49 @@  struct optee_msg_arg {
  * OPTEE_MSG_CMD_STOP_ASYNC_NOTIF informs secure world that from now is
  * normal world unable to process asynchronous notifications. Typically
  * used when the driver is shut down.
+ *
+ * OPTEE_MSG_CMD_LEND_RSTMEM lends restricted memory. The passed normal
+ * physical memory is restricted from normal world access. The memory
+ * should be unmapped prior to this call since it becomes inaccessible
+ * during the request.
+ * Parameters are passed as:
+ * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
+ * [in] param[0].u.value.a		OPTEE_MSG_RSTMEM_* defined above
+ * [in] param[1].attr			OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
+ * [in] param[1].u.tmem.buf_ptr		physical address
+ * [in] param[1].u.tmem.size		size
+ * [in] param[1].u.tmem.shm_ref		holds restricted memory reference
+ *
+ * OPTEE_MSG_CMD_RECLAIM_RSTMEM reclaims a previously lent restricted
+ * memory reference. The physical memory is accessible by the normal world
+ * after this function has return and can be mapped again. The information
+ * is passed as:
+ * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
+ * [in] param[0].u.value.a		holds restricted memory cookie
+ *
+ * OPTEE_MSG_CMD_GET_RSTMEM_CONFIG get configuration for a specific
+ * restricted memory use case. Parameters are passed as:
+ * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INOUT
+ * [in] param[0].value.a		OPTEE_MSG_RSTMEM_*
+ * [in] param[1].attr			OPTEE_MSG_ATTR_TYPE_{R,F}MEM_OUTPUT
+ * [in] param[1].u.{r,f}mem		Buffer or NULL
+ * [in] param[1].u.{r,f}mem.size	Provided size of buffer or 0 for query
+ * output for the restricted use case:
+ * [out] param[0].value.a		Minimal size of SDP memory
+ * [out] param[0].value.b		Required alignment of size and start of
+ *					restricted memory
+ * [out] param[1].{r,f}mem.size		Size of output data
+ * [out] param[1].{r,f}mem		If non-NULL, contains an array of
+ *					uint16_t holding endpoints that
+ *					must be included when lending
+ *					memory for this use case
+ *
+ * OPTEE_MSG_CMD_ASSIGN_RSTMEM assigns use-case to restricted memory
+ * previously lent using the FFA_LEND framework ABI. Parameters are passed
+ * as:
+ * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
+ * [in] param[0].u.value.a		holds restricted memory cookie
+ * [in] param[0].u.value.b		OPTEE_MSG_RSTMEM_* defined above
  */
 #define OPTEE_MSG_CMD_OPEN_SESSION	0
 #define OPTEE_MSG_CMD_INVOKE_COMMAND	1
@@ -346,6 +401,10 @@  struct optee_msg_arg {
 #define OPTEE_MSG_CMD_UNREGISTER_SHM	5
 #define OPTEE_MSG_CMD_DO_BOTTOM_HALF	6
 #define OPTEE_MSG_CMD_STOP_ASYNC_NOTIF	7
+#define OPTEE_MSG_CMD_LEND_RSTMEM	8
+#define OPTEE_MSG_CMD_RECLAIM_RSTMEM	9
+#define OPTEE_MSG_CMD_GET_RSTMEM_CONFIG	10
+#define OPTEE_MSG_CMD_ASSIGN_RSTMEM	11
 #define OPTEE_MSG_FUNCID_CALL_WITH_ARG	0x0004
 
 #endif /* _OPTEE_MSG_H */
diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
index 879426300821..abc379ce190c 100644
--- a/drivers/tee/optee/optee_smc.h
+++ b/drivers/tee/optee/optee_smc.h
@@ -264,7 +264,6 @@  struct optee_smc_get_shm_config_result {
 #define OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM	BIT(0)
 /* Secure world can communicate via previously unregistered shared memory */
 #define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM	BIT(1)
-
 /*
  * Secure world supports commands "register/unregister shared memory",
  * secure world accepts command buffers located in any parts of non-secure RAM
@@ -280,6 +279,10 @@  struct optee_smc_get_shm_config_result {
 #define OPTEE_SMC_SEC_CAP_RPC_ARG		BIT(6)
 /* Secure world supports probing for RPMB device if needed */
 #define OPTEE_SMC_SEC_CAP_RPMB_PROBE		BIT(7)
+/* Secure world supports Secure Data Path */
+#define OPTEE_SMC_SEC_CAP_SDP			BIT(8)
+/* Secure world supports dynamic restricted memory */
+#define OPTEE_SMC_SEC_CAP_DYNAMIC_RSTMEM	BIT(9)
 
 #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES	9
 #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
@@ -451,6 +454,72 @@  struct optee_smc_disable_shm_cache_result {
 
 /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
 #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG	19
+/*
+ * Get Secure Data Path memory config
+ *
+ * Returns the Secure Data Path memory config.
+ *
+ * Call register usage:
+ * a0   SMC Function ID, OPTEE_SMC_GET_SDP_CONFIG
+ * a2-6	Not used, must be zero
+ * a7	Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0	OPTEE_SMC_RETURN_OK
+ * a1	Physical address of start of SDP memory
+ * a2	Size of SDP memory
+ * a3	Not used
+ * a4-7	Preserved
+ *
+ * Not available register usage:
+ * a0	OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-3 Not used
+ * a4-7	Preserved
+ */
+#define OPTEE_SMC_FUNCID_GET_SDP_CONFIG		20
+#define OPTEE_SMC_GET_SDP_CONFIG \
+	OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_SDP_CONFIG)
+
+struct optee_smc_get_sdp_config_result {
+	unsigned long status;
+	unsigned long start;
+	unsigned long size;
+	unsigned long flags;
+};
+
+/*
+ * Get Secure Data Path dynamic memory config
+ *
+ * Returns the Secure Data Path dynamic memory config.
+ *
+ * Call register usage:
+ * a0	SMC Function ID, OPTEE_SMC_GET_DYN_SHM_CONFIG
+ * a2-6	Not used, must be zero
+ * a7	Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0	OPTEE_SMC_RETURN_OK
+ * a1	Minamal size of SDP memory
+ * a2	Required alignment of size and start of registered SDP memory
+ * a3	Not used
+ * a4-7	Preserved
+ *
+ * Not available register usage:
+ * a0	OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-3 Not used
+ * a4-7	Preserved
+ */
+
+#define OPTEE_SMC_FUNCID_GET_DYN_SDP_CONFIG	21
+#define OPTEE_SMC_GET_DYN_SDP_CONFIG \
+	OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_DYN_SDP_CONFIG)
+
+struct optee_smc_get_dyn_sdp_config_result {
+	unsigned long status;
+	unsigned long size;
+	unsigned long align;
+	unsigned long flags;
+};
 
 /*
  * Resume from RPC (for example after processing a foreign interrupt)