@@ -121,6 +121,116 @@ required:
- reg
- ports
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ properties:
+ function:
+ enum: [gpio, rclkout]
+
+ pins: true
+ drive-open-drain: true
+ drive-push-pull: true
+ bias-disable: true
+ output-disable: true
+ output-enable: true
+ output-low: true
+ output-high: true
+ input-enable: true
+
+ slew-rate:
+ description: |
+ Slew rate.
+ 0 - Fastest
+ 1 - Fast
+ 2 - Slow
+ 3 - Slowest
+ maximum: 3
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ description: Enable regular 40kOhm pull-up
+ - enum: [ 40000, 1000000 ]
+ description: Enable either the 40kOhm or the 1MOhm pull-up
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ description: Enable regular 40kOhm pull-down
+ - enum: [ 40000, 1000000 ]
+ description: Enable either the 40kOhm or the 1MOhm pull-down
+
+ maxim,jitter-compensation:
+ type: boolean
+ description: Enables jitter compensation.
+
+ maxim,gmsl-tx:
+ type: boolean
+ description: Enable transmitting pin value to GMSL link.
+
+ maxim,gmsl-rx:
+ type: boolean
+ description: Enable receiving pin value from GMSL link.
+
+ maxim,gmsl-tx-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identifier used while transmitting value to GMSL link.
+ Default value matches the pin number.
+ minimum: 0
+ maximum: 31
+
+ maxim,gmsl-rx-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identifier used while receiving value from GMSL link.
+ Default value matches the pin number.
+ minimum: 0
+ maximum: 31
+
+ maxim,rclkout-clock:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Clock value.
+ 0 - XTAL / 1 = 25MHz
+ 1 - XTAL / 2 = 12.5MHz
+ 2 - XTAL / 4 = 6.25MHz
+ 3 - Reference PLL output
+ minimum: 0
+ maximum: 3
+
+ required:
+ - pins
+ - function
+
+ allOf:
+ - $ref: /schemas/pinctrl/pincfg-node.yaml#
+ - $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ pins:
+ items:
+ enum: [mfp0, mfp1, mfp2, mfp3, mfp4, mfp5, mfp6, mfp7,
+ mfp8, mfp9, mfp10]
+
+ - if:
+ properties:
+ function:
+ const: rclkout
+ then:
+ properties:
+ pins:
+ items:
+ enum: [mfp0, mfp1, mfp2, mfp3, mfp4, mfp7, mfp8]
+
additionalProperties: false
allOf:
@@ -14201,6 +14201,7 @@ M: Julien Massot <julien.massot@collabora.com>
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-media@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml
F: Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
F: drivers/media/i2c/max96717.c
MAX96717 is capable of configuring various pin properties. Add pinctrl/pinconf properties to support this usecase. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> --- .../bindings/media/i2c/maxim,max96717.yaml | 110 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 111 insertions(+)