diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
index 52bcc2d2efe5..288c15a7d72b 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
@@ -100,7 +100,8 @@ struct dvb_usb_device;
 struct dvb_usb_adapter;

 /**
- * structure for carrying all needed data from the device driver to the general
+ * struct dvb_usb_driver_info - structure for carrying all needed data from the
+ *	device driver to the general
  * dvb usb routines
  * @name: device name
  * @rc_map: name of rc codes table
@@ -113,7 +114,7 @@ struct dvb_usb_driver_info {
 };

 /**
- * structure for remote controller configuration
+ * struct dvb_usb_rc - structure for remote controller configuration
  * @map_name: name of rc codes table
  * @allowed_protos: protocol(s) supported by the driver
  * @change_protocol: callback to change protocol
@@ -135,10 +136,11 @@ struct dvb_usb_rc {
 };

 /**
- * usb streaming configuration for adapter
+ * struct usb_data_stream_properties - usb streaming configuration for adapter
  * @type: urb type
  * @count: count of used urbs
  * @endpoint: stream usb endpoint number
+ * @u: union for @bulk and @isoc
  */
 struct usb_data_stream_properties {
 #define USB_BULK  1
@@ -160,15 +162,15 @@ struct usb_data_stream_properties {
 };

 /**
- * properties of dvb usb device adapter
+ * struct dvb_usb_adapter_properties - properties of dvb usb device adapter
  * @caps: adapter capabilities
  * @pid_filter_count: pid count of adapter pid-filter
  * @pid_filter_ctrl: called to enable/disable pid-filter
  * @pid_filter: called to set/unset pid for filtering
  * @stream: adapter usb stream configuration
  */
-#define MAX_NO_OF_FE_PER_ADAP 3
 struct dvb_usb_adapter_properties {
+#define MAX_NO_OF_FE_PER_ADAP 3
 #define DVB_USB_ADAP_HAS_PID_FILTER               0x01
 #define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
 #define DVB_USB_ADAP_NEED_PID_FILTERING           0x04
@@ -208,6 +210,7 @@ struct dvb_usb_adapter_properties {
  * @frontend_attach: called to attach the possible frontends
  * @frontend_detach: called to detach the possible frontends
  * @tuner_attach: called to attach the possible tuners
+ * @tuner_detach: called to detach the possible tuners
  * @frontend_ctrl: called to power on/off active frontend
  * @streaming_ctrl: called to start/stop the usb streaming of adapter
  * @init: called after adapters are created in order to finalize device
@@ -218,8 +221,8 @@ struct dvb_usb_adapter_properties {
  *  of the adapter just before streaming is started. input stream is transport
  *  stream from the demodulator and output stream is usb stream to host.
  */
-#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
 struct dvb_usb_device_properties {
+#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
 	const char *driver_name;
 	struct module *owner;
 	short *adapter_nr;
@@ -265,7 +268,12 @@ struct dvb_usb_device_properties {
 };

 /**
- * generic object of an usb stream
+ * struct usb_data_stream - generic object of an usb stream
+ * @udev: USB device
+ * @props: properties
+ * @state: state of the data stream
+ * @complete: complete callback
+ * @urb_list: list of URBs
  * @buf_num: number of buffer allocated
  * @buf_size: size of each buffer in buf_list
  * @buf_list: array containing all allocate buffers for streaming
@@ -273,9 +281,10 @@ struct dvb_usb_device_properties {
  *
  * @urbs_initialized: number of URBs initialized
  * @urbs_submitted: number of URBs submitted
+ * @user_priv: private pointer
  */
-#define MAX_NO_URBS_FOR_DATA_STREAM 10
 struct usb_data_stream {
+#define MAX_NO_URBS_FOR_DATA_STREAM 10
 	struct usb_device *udev;
 	struct usb_data_stream_properties props;

@@ -298,7 +307,7 @@ struct usb_data_stream {
 };

 /**
- * dvb adapter object on dvb usb device
+ * struct dvb_usb_adapter - dvb adapter object on dvb usb device
  * @props: pointer to adapter properties
  * @stream: adapter the usb data stream
  * @id: index of this adapter (starting with 0)
@@ -307,11 +316,12 @@ struct usb_data_stream {
  * @pid_filtering: is hardware pid_filtering used or not
  * @feed_count: current feed count
  * @max_feed_count: maimum feed count device can handle
+ * @active_fe: active frontend
+ * @state_bits: status bits
  * @dvb_adap: adapter dvb_adapter
  * @dmxdev: adapter dmxdev
  * @demux: adapter software demuxer
  * @dvb_net: adapter dvb_net interfaces
- * @sync_mutex: mutex used to sync control and streaming of the adapter
  * @fe: adapter frontends
  * @fe_init: rerouted frontend-init function
  * @fe_sleep: rerouted frontend-sleep function
@@ -343,7 +353,7 @@ struct dvb_usb_adapter {
 };

 /**
- * dvb usb device object
+ * struct dvb_usb_device - dvb usb device object
  * @props: device properties
  * @name: device name
  * @rc_map: name of rc codes table
@@ -355,7 +365,9 @@ struct dvb_usb_adapter {
  * @usb_mutex: mutex for usb control messages
  * @i2c_mutex: mutex for i2c-transfers
  * @i2c_adap: device's i2c-adapter
+ * @adapter: adapters
  * @rc_dev: rc device for the remote control
+ * @rc_phys: rc path
  * @rc_query_work: work for polling remote
  * @priv: private data of the actual driver (allocate by dvb usb, size defined
  *  in size_of_priv of dvb_usb_properties).
diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
index 741be0e69447..15f3cd733c89 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb.h
+++ b/drivers/media/usb/dvb-usb/dvb-usb.h
@@ -95,7 +95,7 @@ struct dvb_usb_device;
 struct dvb_usb_adapter;
 struct usb_data_stream;

-/**
+/*
  * Properties of USB streaming - TODO this structure should be somewhere else
  * describes the kind of USB transfer used for data-streaming.
  *  (BULK or ISOC)
@@ -120,7 +120,7 @@ struct usb_data_stream_properties {
 };

 /**
- * struct dvb_usb_adapter_properties - properties of a dvb-usb-adapter.
+ * struct dvb_usb_adapter_fe_properties - properties of a dvb-usb-adapter.
  *    A DVB-USB-Adapter is basically a dvb_adapter which is present on a USB-device.
  * @caps: capabilities of the DVB USB device.
  * @pid_filter_count: number of PID filter position in the optional hardware
@@ -139,6 +139,7 @@ struct usb_data_stream_properties {
  * @tuner_attach: called to attach the correct tuner and to fill pll_addr,
  *  pll_desc and pll_init_buf of struct dvb_usb_device).
  * @stream: configuration of the USB streaming
+ * @size_of_priv: size of the priv memory in struct dvb_usb_adapter
  */
 struct dvb_usb_adapter_fe_properties {
 #define DVB_USB_ADAP_HAS_PID_FILTER               0x01
@@ -191,15 +192,17 @@ struct dvb_rc_legacy {
 };

 /**
- * struct dvb_rc properties of remote controller, using rc-core
+ * struct dvb_rc - properties of remote controller, using rc-core
  * @rc_codes: name of rc codes table
  * @protocol: type of protocol(s) currently used by the driver
  * @allowed_protos: protocol(s) supported by the driver
  * @driver_type: Used to point if a device supports raw mode
  * @change_protocol: callback to change protocol
+ * @module_name: module name
  * @rc_query: called to query an event event.
  * @rc_interval: time in ms between two queries.
  * @bulk_mode: device supports bulk mode for RC (disable polling mode)
+ * @scancode_mask: scancode mask
  */
 struct dvb_rc {
 	char *rc_codes;
@@ -219,6 +222,9 @@ struct dvb_rc {
  *		       based on rc-core
  * This is initialized/used only inside dvb-usb-remote.c.
  * It shouldn't be set by the drivers.
+ *
+ * @DVB_RC_LEGACY: legacy driver
+ * @DVB_RC_CORE: rc-core driver
  */
 enum dvb_usb_mode {
 	DVB_RC_LEGACY,
@@ -227,6 +233,7 @@ enum dvb_usb_mode {

 /**
  * struct dvb_usb_device_properties - properties of a dvb-usb-device
+ * @caps: capabilities
  * @usb_ctrl: which USB device-side controller is in use. Needed for firmware
  *  download.
  * @firmware: name of the firmware file.
@@ -243,6 +250,8 @@ enum dvb_usb_mode {
  * @priv_destroy: just like priv_init, only called before deallocating
  * the memory pointed by private field of struct dvb_usb_device.
  *
+ * @num_adapters: the number of adapters in @adapters
+ * @adapter: the adapters
  * @power_ctrl: called to enable/disable power of the device.
  * @read_mac_address: called to read the MAC address of the device.
  * @identify_state: called to determine the state (cold or warm), when it
@@ -267,9 +276,8 @@ enum dvb_usb_mode {
  * @devices: array of struct dvb_usb_device_description compatibles with these
  *  properties.
  */
-#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
 struct dvb_usb_device_properties {
-
+#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
 #define DVB_USB_IS_AN_I2C_ADAPTER            0x01
 	int caps;

@@ -313,6 +321,11 @@ struct dvb_usb_device_properties {

 /**
  * struct usb_data_stream - generic object of an USB stream
+ * @udev: the USB device
+ * @props: data stream properties
+ * @state: state of the stream
+ * @complete: complete callback
+ * @urb_list: list of URBs
  * @buf_num: number of buffer allocated.
  * @buf_size: size of each buffer in buf_list.
  * @buf_list: array containing all allocate buffers for streaming.
@@ -320,9 +333,10 @@ struct dvb_usb_device_properties {
  *
  * @urbs_initialized: number of URBs initialized.
  * @urbs_submitted: number of URBs submitted.
+ * @user_priv: for private use.
  */
-#define MAX_NO_URBS_FOR_DATA_STREAM 10
 struct usb_data_stream {
+#define MAX_NO_URBS_FOR_DATA_STREAM 10
 	struct usb_device                 *udev;
 	struct usb_data_stream_properties  props;

@@ -345,29 +359,15 @@ struct usb_data_stream {
 };

 /**
- * struct dvb_usb_adapter - a DVB adapter on a USB device
- * @id: index of this adapter (starting with 0).
- *
- * @feedcount: number of requested feeds (used for streaming-activation)
- * @pid_filtering: is hardware pid_filtering used or not.
- *
- * @pll_addr: I2C address of the tuner for programming
- * @pll_init: array containing the initialization buffer
- * @pll_desc: pointer to the appropriate struct dvb_pll_desc
- * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or the board
- *
- * @dvb_adap: device's dvb_adapter.
- * @dmxdev: device's dmxdev.
- * @demux: device's software demuxer.
- * @dvb_net: device's dvb_net interfaces.
- * @dvb_frontend: device's frontend.
- * @max_feed_count: how many feeds can be handled simultaneously by this
- *  device
- *
+ * struct dvb_usb_fe_adapter - a DVB adapter on a USB device
+ * @fe: frontend
  * @fe_init:  rerouted frontend-init (wakeup) function.
  * @fe_sleep: rerouted frontend-sleep function.
- *
  * @stream: the usb data stream.
+ * @pid_filtering: is hardware pid_filtering used or not.
+ * @max_feed_count: how many feeds can be handled simultaneously by this
+ *  device
+ * @priv: private pointer
  */
 struct dvb_usb_fe_adapter {
 	struct dvb_frontend *fe;
@@ -383,6 +383,25 @@ struct dvb_usb_fe_adapter {
 	void *priv;
 };

+/**
+ * struct dvb_usb_adapter - a DVB adapter on a USB device
+ * @dev: DVB USB device pointer
+ * @props: properties
+ * @state: status
+ * @id: index of this adapter (starting with 0).
+ *
+ * @feedcount: number of requested feeds (used for streaming-activation)
+ *
+ * @dvb_adap: device's dvb_adapter.
+ * @dmxdev: device's dmxdev.
+ * @demux: device's software demuxer.
+ * @dvb_net: device's dvb_net interfaces.
+ *
+ * @fe_adap: frontend adapters
+ * @active_fe: active frontend
+ * @num_frontends_initialized: number of initialized frontends
+ * @priv: private pointer
+ */
 struct dvb_usb_adapter {
 	struct dvb_usb_device *dev;
 	struct dvb_usb_adapter_properties props;
@@ -427,8 +446,12 @@ struct dvb_usb_adapter {
  *
  * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
  *
+ * @num_adapters_initialized: number of initialized adapters
+ * @adapter: adapters
+ *
  * @rc_dev: rc device for the remote control (rc-core mode)
  * @input_dev: input device for the remote control (legacy mode)
+ * @rc_phys: rc device path
  * @rc_query_work: struct work_struct frequent rc queries
  * @last_event: last triggered event
  * @last_state: last state (no, pressed, repeat)
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 6648e11f1271..90dff693d7c5 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -335,7 +335,7 @@ enum em28xx_usb_audio_type {
 };

 /**
- * em28xx_amux - describes the type of audio input used by em28xx
+ * enum em28xx_amux - describes the type of audio input used by em28xx
  *
  * @EM28XX_AMUX_UNUSED:
  *	Used only on em28xx dev->map field, in order to mark an entry
