mbox series

[stable,4.14,v2,0/3] MMC timeout back ports

Message ID 20220519190030.377695-1-f.fainelli@gmail.com
Headers show
Series MMC timeout back ports | expand

Message

Florian Fainelli May 19, 2022, 7 p.m. UTC 
These 3 commits from upstream allow us to have more fine grained control
over the MMC command timeouts and this solves the following timeouts
that we have seen on our systems across suspend/resume cycles:

[   14.907496] usb usb2: root hub lost power or was reset
[   15.216232] usb 1-1: reset high-speed USB device number 2 using
xhci-hcd
[   15.485812] bcmgenet 8f00000.ethernet eth0: Link is Down
[   15.525328] mmc1: error -110 doing runtime resume
[   15.531864] OOM killer enabled.

Thanks!

Changes in v2:

- assign timeout to  MMC_BKOPS_TIMEOUT_MS in mmc_start_bkops to avoid
  making timeout unused and changing the existing logic

Ulf Hansson (3):
  mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
  mmc: block: Use generic_cmd6_time when modifying
    INAND_CMD38_ARG_EXT_CSD
  mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()

 drivers/mmc/core/block.c   |  6 +++---
 drivers/mmc/core/mmc_ops.c | 27 ++++++++++++++-------------
 2 files changed, 17 insertions(+), 16 deletions(-)