mbox series

[v4,0/2] arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP

Message ID 20241212-x1e80100-qcp-sdhc-v4-0-a74c48ee68a3@linaro.org
Headers show
Series arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP | expand

Message

Abel Vesa Dec. 12, 2024, 4:50 p.m. UTC 
The X1E80100 has two SDHC controllers (called SDC2 and SDC4).
Describe both of them and enable the SDC2 on QCP. This brings
SD card support for the microSD port on QCP.

The SDC4 is described but there is no device outthere yet that makes
use of it, AFAIK.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v4:
- Squashed the pinconf for SDC2 into the patch that describes the
  controllers.
- Reworded the commit messages a bit.
- Link to v3: https://lore.kernel.org/r/20241022-x1e80100-qcp-sdhc-v3-0-46c401e32cbf@linaro.org

Changes in v3:
- Reordered the default and sleep pinconfs. Also the bias and
  drive-strength properties. As per Konrad's suggestion.
- Link to v2: https://lore.kernel.org/r/20241014-x1e80100-qcp-sdhc-v2-0-868e70a825e0@linaro.org

Changes in v2:
- rebased on next-20241011
- dropped the bindings schema update patch
- dropped the sdhci-caps-mask properties from both
  controllers as SDR104/SDR50 are actually supported
- Link to v1: https://lore.kernel.org/r/20241008-x1e80100-qcp-sdhc-v1-0-dfef4c92ae31@linaro.org

---
Abel Vesa (2):
      arm64: dts: qcom: x1e80100: Describe the SDHC controllers
      arm64: dts: qcom: x1e80100-qcp: Enable SD card support

 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts |  20 +++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    | 142 ++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+)
---
base-commit: 91e71d606356e50f238d7a87aacdee4abc427f07
change-id: 20241007-x1e80100-qcp-sdhc-15c716dad946

Best regards,